How to Pick Out Surge Brake Hub/Drums and Assemblies for Trailer
Question:
The bearing is a Timken model 68149. The ID the race 1 3/4 and the OD is 2 1/2. The drum is 5 bolt, 2 5/8 center to center of lugs. The drum ID is 10 inches. Maybe more than what you needed. The serial number of the other bearing is L44649. The ID of the seal is 1 3/4 and the OD is 2 1/2. The race is an L68111. The inner bearing is L68149. Missed the L when I looked earlier.
asked by: Robert C
Helpful Expert Reply:
So the easiest way to replace the components you mentioned would be with new hub/drums and new brake assemblies. To do that I'd need to know a few key pieces of info. The bolt pattern on the hub where the wheels attach, the bearing numbers out of the hub or the dimensions where they ride on the spindle. With that info I can get you the correct hub drum and from there know which brake assemblies you'll need.
I attached a link to this page that details this process as well.
Products Referenced in This Question
Demco Hydraulic Drum Brake Assembly - Free Backing - Galvanized - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Free Backing
- 10 x 2-1/4 Inch Drum
- Demco
more information >
Demco Hydraulic Drum Brake Assembly - Free Backing - Galvanized - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Free Backing
- 10 x 2-1/4 Inch Drum
- Demco
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Demco Hydraulic Drum Brake Assembly - Free Backing - Galvanized - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Free Backing
- 10 x 2-1/4 Inch Drum
- Demco
more information >
Continue Researching
- Q&A: Grease Seal to Replace Part Number 174253tb
- Q&A: Shelby Side Wind Trailer Jack, Part # 6108SW for Triton Trailer
- Q&A: Trailer Jack Recommendation For 14,000 Lb A-frame Dump Trailer
- Q&A: Is There a Right Hand Version of the Rectangle LED Trailer Tail and License Plate Light # STL57RB
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Recommended Brake Fluid for Demco Brake Actuators
- Q&A: Availability of Replacement for Trailer Hub/Brake Drum 92865A-1
- Q&A: How to Select Replacement Hydraulic Drum Brake Assembly for Calkins Boat Trailer
- Article: How to Measure a Trailer Axle
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Measuring a Trailer Tire
- Article: Where to Position the Trailer Axle?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Brake Controller Installation on a Full-Size Ford Truck or SUV
Robert C.
7/18/2018
The bearing is a Timken model 68149. The ID the race 1 3/4 and the OD is 2 1/2. The drum is 5 bolt, 2 5/8 center to center of lugs. The drum ID is 10 inches. Maybe more than what you needed. The serial number of the other bearing is L44649. The ID of the seal is 1 3/4 and the OD is 2 1/2. The race is an L68111. The inner bearing is L68149. Missed the L when I looked earlier.