Curt Bolt Kit for Trunnion Style Weight Distribution Hitch

See what our Experts say about this CURT Accessories and Parts

• Where Do the Conical Tooth Washers Install on a Curt Weight Distribution System
  The parts in question are conical tooth washers. On the Curt weight distribution systems they go between the nuts and the head using the bolts that hold the head to the shank. I have included a picture that points them out for you. The tooth side faces the head, not the nut.
  view full answer...
  
• Replacement Spring Bar Retainer Clips for Curt Trunnion Bar Weight Distribution System
  I do have an option for you but the Curt Bolt Kit for Trunnion Style Weight Distribution Hitch part # C17350 does not come with the spring bar retainer clips that you are referring to. Unfortunately, these retainers clips are not sold separately as they are built into the head so if the head you have now does not have these or they were damaged then you would need to replace the entire head as well with the Curt Replacement Weight Distribution Head for Trunnion Style Bars part # C17307.
  view full answer...
• Can Curt Weight Distribution Head C17307 Fit Equal-i-zer Shank
  Yes the Curt weight distribution head part # C17307 is compatible with the shank part # EQ90-02-4600 that you also referenced. These two parts together would give you a really long ball mount setup with an adjustable height. You'd also need the hardware kit part # C17350 as well to bolt the head to the shank.
  view full answer...
• Mounting Hardware for Curt Trunnion Style Weight Distribution Hitch
  The Curt Bolt Kit for Trunnion Style Weight Distribution Hitch, # C17350, will be the hardware kit that you will need for the Curt Replacement Weight Distribution Head for Trunnion Style Bars, # C17307.
  view full answer...
• Replacement Hardware Recommendation for a Curt Trunnion Bar Weight Distribution System
  The only way to get the replacement Curt WD head assembly bolts would be to get the Curt Bolt kit part # C17350 that also includes several other bolts and hardware.
  view full answer...
• Replacement Hardware for Curt Replacement Weight Distribution Head # C17307
  The mounting hardware for the Curt Replacement Weight Distribution Head # C17307 is found as part # C17350 on our site. This weight distribution head will fit your shank as long as the portion that it mounts to is no wider than 2" and has mounting holes that are 1-1/4" apart on center.
  view full answer...
  

Do you have a question about this Accessories and Part?