RV Bumper 2" Trailer Hitch Receiver - Clamp-On
(122 reviews)
Price: $58.60
RV Bumper 2" Trailer Hitch Receiver - Clamp-On
Item # S64025
Retail:$65.81
Our Price: $58.60
You Save: 11%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (122)
- Q & A (0)
- Photos
Swagman RV and Camper Hitch - S64025
- Bumper Mount Hitch
- 4 x 4 Inch Bumper
- 4-1/2 x 4-1/2 Inch Bumper
- 4-1/4 x 4-1/4 Inch Bumper
- Bolt-On
- 2 Inch Hitch
- 200 lbs TW
- Swagman
Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.
Features:
- 2" Hitch receiver opening to accommodate hitch accessories
- Solid steel construction
- Powder coated to resist corrosion
- For use with up to a 4-bike non-folding, standard bike rack
- Not to be used for towing or with cargo carriers
- For use above the bumper only
- Never exceed the bumper's stated capacities
- Attaches to bumper using 4" bolts (included)
Specs:
- Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers
- Not for use on aluminum or spot-welded bumpers
- Load capacity: 200 lbs
- Distance from the center of hitch pin hole to end of receiver: 3"
- Mounting plate measures 6" x 6"
Note: Not to be used with an adapter or extender.
64025 RV Bumper 2" Trailer Hitch Receiver - Clamp-On
Tech Tip
No drilling required for installation
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
- Alternate product found
Customer Reviews
RV Bumper 2" Trailer Hitch Receiver - Clamp-On - S64025
Average Customer Rating: 4.8 out of 5 stars (122 Customer Reviews)
Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.by: Clark C09/07/2022
Hold up well after 160 miles camping trip. Mounted at 4” rear bumper of my camping trailer to accomodate 2 bike rack. I only carry 1 bike for the trip. Solid and well secured using provision screw that you need to tightened once bike rack is mounted to avoid movement when driving.
by: Jimbo09/01/2014
Very pleased with this product it's robust and solid, the bolts and lock nuts are high quality. Ordering and shipping were easy and fast. The part fit perfectly I used some gasket material to protect the bumper, would have liked to have the torque specs on the nuts. I use a Thule bicycle rack and this hitch allows me to bring along the bikes on my 5th wheel.
by: George 02/12/2024
Very happy with the item. Well-made, and fits my RV bumper.
by: Lazy Creeks06/30/2018
Great vendor, great product.
We have 6 trailers at our home; 2 boat, 1 tandem utility, 3 single axle utility that need to be moved around frequently for space reasons.
Airports need to "push back" planes from their gates for which the "tugs" have hitches on their front bumpers. That arrangement allows greater steering control than if their hitches were mounted on the rear of the "tugs". So, I've mounted this wonderful hitch to the front bumper of my '86 Isuzu Trooper II 4-wheel drive which I use to position my trailers. Of course it's NOT safe for highway travel, but as a positioning aid, it is superb. Also; etrailer communications and speed of delivery cannot be improved. Don't change anything, etrailer.
by: Kevin 06/17/2020
I'm using this to mount a pretty large and heavy 4-bike rack to the rear bumper of my camper. This thing is stout. It has nylock nuts so I don't have to worry about the nuts backing off. Also has a threaded bolt hold in the side w/ bolt so that you can snug up whatever you put in the receiver (bike rack, etc.) to keep it from swaying. I really like that feature.
by: Michael J04/23/2014
Opened the box and was immediately impressed by the construction quality of this bike rack receiver. Easily installed on the bumper of our trailer and again, I was very impressed with the sturdy bolts, back plate and receiver. Too bad Swagman doesn't make one of these for my inferior spare tire holder.
Michael J.
4/23/2015
This is a great product, period! Perfect match for my 4 trailer bumper and my bike rack. But more importantly is the quality service I receive from etrailer. They are a great source for everything you could possibly need for your trailer or RV. Ive ordered several items from them and the quality is always 5 Star! Cannot say enough good things about their customer service. They are 5 Star from top to bottom. They set the standard for customer service and products.
by: John 06/09/2020
Luck was on your side for a nice piece of furniture for my trailer. The package arrived ok but when I went to open it -- I had no trouble. The shipping expert had forgotten to tape the box on the lid!!! Thankfully because the connector was tightly packed, it did not fall our and break someones foot or get lost and thrown in the trash.
John
6/11/2021
Like it is supppose to!
by: John M.08/05/2015
The RV Bumper Hitch Receiver is of great quality and is easily installed. I used it to mount to my trailer steel bumper so I can carry my bikes which mount on a receiver type rack.
John M.
8/16/2016
All three of these products have held up well and performed well. Thanks.
by: Patricia09/18/2018
Swagman hitch fits securely on our 4” trailer bumper. Our standard bike rack works fine on the hitch. I have had several campers ask me where I got the bumper hitch and have recommended etrailer for their solid customer service
by: Jim S.03/17/2017
The Swagman RV Bumper 2" Trailer Hitch receiver is a very solid hitch receiver especially for the Swagman Dispatch 2 Bike Platform Rack - 2". Along with the threaded pin from the bike rack and the set bolt on this receiver there is no play or movement in the receiver tube. My bumper is 4" square and will require spacers on the back side to fully secure, minor issue.
by: Glenn03/12/2018
Etrailer service is always top notch with fast shipping. They are my go-to whenever I need parts or service items on my RV's trailers or truck.
About this hitch. Easy to install & does the job. Needed it to carry bikes on the back of our travel trailer. Due to ground clearance as you leave some gas stations, I would not mount it below the bumper you may drag the bikes on the ground. In fact they say not to bolt it underneath the bumper due to the limits of the bolt strength. So for what it is intended for, it's a great solution.
by: Mike07/06/2016
Purchased to fit on my RV bumper for bike rack/cargo carrier. Installation is as basic as you can get. I was surprised that the bolts were grade 8, but there were no washers. See no reason why it won't work very well.
by: Charles M05/18/2018
I ordered the Swagman RV hitch s64025. Upon receiving the hitch early Wednesday afternoon, I opened the box and noticed that the bottom plate was missing. I immediately called etrailer and spoke with Crystal. She was sympathetic and totally understanding of my situation. She immediately placed an order for a replacement. I received the replacement hitch early Friday afternoon. I'm just waiting for instructions to return the old hitch. The original box may have been opened somewhere during shipment--I can't be sure. However, I would not hesitate ordering anything from etrailer. I ordered other items as well and they all arrived on-time and in good condition. A big Thank you Crystal, and I would be remiss if I didn't thank Reesa, and Tiffany for their help in placing other orders. This is what I call a Five-Star customer oriented company--nothing short of OUTSTANDING!!!
by: Jay W.12/06/2017
RV Bumper Hitch attachment: Works perfect! I use two, one on each end of the bumper to attach flag pole holders. Have already had comments about the product and the professionalism of the staff and the quick mailing was impressive!
Installation was simply bolting the product onto the bumper, how easy is that!!??
No more use of U-Bolts and or having to weld pipe onto the RV in order to flag my NASCAR flags at the track(s).
Do not be doubtful of this product!! Get yourself one or two!! Thanks etrailer!!
by: Tom A.10/11/2014
I installed this item to mount the Prorack 2 bike rack on the bumper of our new trailer so that we could conveniently carry 2 lounge chairs. It was nicely fabricated and finished, and installed easily with the hardware included. I'd have given it an "excellent" rating, but I'm not sure that there won't be some future corrosion issues with the bolts provided due to the type of surface treatment. However - with this stated - I'd definitely consider purchasing this item again to meet a similar need in the future.
by: Doug 09/22/2022
Works great on travel trailer tube bumper. As cheap to buy rather than making it
by: Mark 09/08/2022
Had it for a year now it’s holding up perfectly, still looks like new. I use it for my bike rack and it works great.
by: Andrew 09/03/2020
Good product, reasonable price, easy to find on etrailer. Just what was needed to add a bike rack on the rear bumper of our travel trailer. Just as advertised, works fine, seems strong enough - though time will tell. Arrived in good time, as predicted.
by: Don S.03/06/2017
This clamp on hitch receiver arrived in only a couple of days although I live in Southern Ontario Canada. The finish and welding on this product are excellent. I will use it for attaching a bike rack to the rear bumper of our new travel trailer. I purchased the bike rack some months ago from etrailer. That was also very good customer service experience.
by: Dave 05/14/2020
Just right to add a bike rack, not load rated to add a trailer.
Would prefer locking nuts, but easy to find at hardware store.
by: Elwood07/25/2015
Received the product and installed it today - easy installation. I have another hitch receiver that I bought years ago, but it's at our home in Florida and we're currently in Ohio. This one is much better quality, but also cost over twice as much. While we won't be leaving to head home for a month, I foresee no issues with this receiver handling the bike rack and two bikes.
by: Fred B.06/20/2016
Perfect for my new RV. I like the all black finish, bolts included, that goes well with the black bumper. It will be used for a two bike carrier and looks to be rugged enough, I'm sure it is, and time will tell. I think it will be great.
by: Gareth M02/21/2017
This hitch was the perfect way to mount my bicycle rack to the rear of my trailer. We have used it several times in the last year with no problems. It was easy to install.
by: Charles S.12/06/2015
Bolt-on 2" receiver for bike rack on RV bumper. Wow! Excellent quality, super construction, welds & finish, easy install. AND fast delivery. Thank you etrailer!!
by: Mark P.05/14/2011
Everything was as advertised. Quality product, easy to install, works great. I used this to attach a Thule hitch mount bike carrier to the bumper of my camper.
Shipping was nearly immediate
25
122
Show More Reviews
See what our Experts say about this Swagman RV and Camper Hitch
- Using the Swagman 2 inch RV Bumper Trailer Hitch for a Scooter Carrier.In order to use a scooter carrier with the 4-inch bumper hitch, part # S64025, the entire load would need to be less than 200 pounds, including the weight of the carrier and scooter.
view full answer... - Hitch Options for a 1982 Dodge RampageFor your vehicle I believe your best option for installing a hitch would be to contact a qualified fabricator and have them custom fabricate a hitch. The hitch you referenced is more for RV bumpers that are 4 inch by 4 inch and would not be ideal for you, in fact it probably wouldn't work at all.
view full answer...
- What Is The Total Height of Swagman RV 2 Inch Trailer Hitch Receiver Above RV Bumper?The RV Bumper 2" Trailer Hitch Receiver - Clamp-On # S64025 It is right at 3 inches tall from the bottom of the top plate to the top of the receiver collar. It will fit and give you clearance so it will serve you well. The capacity of the hitch receiver will be limited by the bumper capacity or the 200 lb tongue weight capacity of the receiver.
view full answer...
- Swagman Platform Bike Rack Recommendation for Use Behind an RVThe Swagman XTC2 Bike Rack part # S64670 is a great rack, the only problem is that it is not designed to work at the back of an RV or trailer. The ride quality at the back of an RV is much rougher than the back of a passenger vehicle. Because of this only certain racks have been designed to work there. For a similar rack that would work at the back of an RV (and actually this comes with the # S64025) you would want the Swagman Platform-Style 2 Bike Rack # S64663. This rack has been confirmed...
view full answer... - Swagman RV Bumper Trailer Hitch Receiver Fit And CompatibilityThe RV Bumper 2" Trailer Hitch Receiver - Clamp-On # S64025 is designed for the standard 4 inch RV bumper, but it will fit 4 inch to 4.5 inch continuous welded steel bumpers. The mounting plate measures 6 x 6 inches. This hitch receiver is not to be used with adapters or extenders.
view full answer... - Recommendation for a Trailer Hitch that Mounts to a Bumper Pull HitchIt sounds like you are describing a bumper hitch with a ball. What you can do is remove the ball and install Curt Bumper Hitch, # E-3S. This will provide a 2 inch trailer hitch receiver that you can use with a hitch mounted bike rack. I have included a link to the installation details for the hitch. If you have an RV or trailer that has a 4 inch square channel bumper, you could use RV Bumper Trailer Hitch Receiver, # E-100. Or, if it is a 4 inch square continuous welded steel bumper, you...
view full answer... - Bumper Mounted Hitch That Will Work With Roadmaster Hitch Mounted Spare Tire CarrierThere is a hitch that will work for you, but the Bumper Hitch Receiver # S64025 that you referenced is for use with bike racks and would not be a fit for your new Roadmaster Spare Tire Mount RM-195225. Instead, I recommend the Ultra-Fab # UF35-946402 which is a 2" trailer hitch receiver that clamps onto 4" x 4" square bumpers and has a maximum tongue weight of 350 lbs, which should be well within the range of the Spare Tire Mount and spare tire. I've added links to a pair of video reviews...
view full answer... - Weight Capacity Of RV Bumper Mounted Hitch ReceiverThis Clamp-On RV Bumper Hitch Receiver, part # S64025, is constructed of solid steel and designed to fit 4 inch by 4 inch bumpers. Its load capacity is 200 lbs which should be plenty strong to hold two bikes and the weight of the bike carrier. You will want to check with the RV manufacturer to make sure you never exceed the bumper weight capacity on your RV. This receiver should not be used with aluminum or spot welded bumpers. It is not designed for cargo carriers or for towing. I have...
view full answer... - Trailer Hitch and Wiring for a 2007 Subaru Impreza HatchbackThe trailer hitches that are available for your 2007 Subaru Impreza all top out at 200 pounds tongue weight so you would need a different way to carry the motorcycle. Basically, using the Impreza the motorcycle would have to be on a trailer. This is actually much safer and easier on the vehicle than a hitch mounted carrier. If your Impreza is a WRX but not an STi model then you can use Curt trailer hitch # C11497. The proper ball mount is # 3593. For a 1-7/8 inch ball use # 19256 and for...
view full answer... - Why Wont the Hollywood Racks Sport Rider Bike Racks Work On a 5th Wheel TrailerThe Hollywood Racks Sport Rider Bike Racks are indeed not rated for use on a fifth wheel trailer as is the case with many bike racks due to the decreased ride quality at the back of the trailer. Instead, you'll need to use the Hollywood Racks RV Rider Bike Platform Rack part # HLY64FR which is built much stronger. In regards to a bumper hitch, most are either for a 4" x 4" or 4-1/2" x 4-1/2" as these are the standard sizes. That said, the RV Bumper 2" Trailer Hitch Receiver part # S64025...
view full answer... - Hitch Options for Carrying Bikes on Rear of 1989 Prowler Travel TrailerSince all the RV bumper hitches we offer only fit up to 4 inch bumpers, your best bet would be to go with a frame mounted hitch. The hitch you need will depend on the outside-to-outside dimension of the frame members under your travel trailer. If the outside to outside width is between 22 and 72 inches, the Curt # 13703 would be an excellent choice that has a tongue weight capacity of 350 lbs. If the outside frame member to frame member distance is less than 22 inches, the Curt # C13701...
view full answer... - Trailer Hitch Options for a 2008 Fleetwood Avalon Pop-Up CamperFrame mounted trailer hitches are always a more secure option over bumper mounted hitches and typically have higher towing and tongue weight capacities. Before you install a trailer hitch on your 2008 Fleetwood Avalon pop-up camper, I recommend contacting Fleetwood to see if they have a recommended towing capacity for your camper. I know many trailer manufacturers do not recommend towing a trailer behind another trailer for safety reasons and some pop-up campers are not even rated for towing. We...
view full answer... - Bumper Mounted Hitch That Works With A 4-1/2 Square BumperSimilar to the Curt RV Bumper 2" Trailer Hitch Receiver # E-100 that you're interested in, we have the: -RV Bumper 2" Trailer Hitch Receiver # S64025. This trailer hitch receiver will work on 4" to 4-1/2" continuous-welded steel bumpers, and has a load capacity of 200lbs.
view full answer... - RV Bumper Hitch Recommendation that Can Mount Below Bumper I have a solution for you, but the RV Bumper 2" Trailer Hitch Receiver # S64025 that you referenced can only be used with the hitch opening on top of the bumper. Instead you would want the Ultra-Fab 2" Motor Home Trailer Hitch # UF35-946401. This hitch can be used with the opening on the bottom of the bumper. Be sure not to exceed the weight capacity of your bumper, check the owners manual of your vehicle for more info on that.
view full answer... - Recommended RV Bumper Trailer Hitch Rated to Carry Cargo Carrier on Nomad Trailer with Spare TireThe Swagman RV Bumper Receiver you referenced, part # S64025, is designed for a 4 inch square continuously welded steel tube bumper. However it is not designed to use with cargo carriers. We have another bumper mounted hitches that would be a bit more heavy duty. The Curt RV bumper hitch # E-100 could handle up to 350lbs of tongue weight. We do also carry frame mounted hitches for RVs, which should offer more weight capacity. I have included a link to the frame mount RV hitches below....
view full answer... - Can Swagman Bumper Mount Adapter Mount Underneath BumperI spoke with my contact at Swagman and was informed that the RV 2 inch Receiver Bumper Mount Adapter, # S64025, cannot be mounted underneath of the bumper because the bolts included with the receiver are not designed to handle the tongue weight required of it in that position. One option we have for mounting a receiver under the bumper of your camper is the RV Bumper 2 inch Trailer Hitch Receiver, # E-100. However, you cannot exceed the limits of your camper bumper. The bumper towing...
view full answer... - Capacity of Swagman RV Bumper Trailer Hitch # S64025 with Anti-RattleI spoke with my contact at Swagman, the manufacturer of the RV bumper trailer hitch # S64025, and he stated that the capacity is going to be about 100 pounds, but no higher. So if your cargo carrier and generator are 200 pounds, I would advise against installing this particular hitch for your application. We have another bumper mounted hitches that would be a bit more heavy duty. The Curt RV bumper hitch # E-100 could handle up to 350lbs of tongue weight. We do also carry frame mounted...
view full answer... - Capacity of Clamp-On RV Bumper 2 Inch Trailer Hitch Receiver # S64025 with Anti-RattleThe limiting factor is not the capacity of RV bumper hitch # S64025. The main issue is the capacity of the bumper. You will need to contact the RV manufacturer to find out the specifications for your bumper. Also, you will have to be certain you have the right bumper, as this hitch is designed exclusively for 4 inch by 4 inch continuous-welded steel bumpers. This adapter is not compatible with aluminum or spot-welded steel bumpers. There is no drilling required, as the hitch slips over...
view full answer... - Will the # 64025 Swagman RV 2 inch Receiver Bumper Mount Adapter Mount Underneath the RV BumperOne option we have for mounting a receiver under the bumper of your RV is the RV Bumper 2 inch Trailer Hitch Receiver, item # E-100. The only problem I see with the location you are suggesting is the distance from the bottom of the receiver to the road surface. If there is not enough clearance the clamp on hitch, bike rack shank or bikes themselves may make contact with the road and damage one or all of the components including the RV bumper. I spoke with my contact at Swagman and was...
view full answer... - Trailer Hitch Receiver Compatible with Chalet LTW A-Frame Camping TrailerBolt on RV hitch receivers are all designed for 4x4 inch bumpers so you will need to check with the manufacturer of your bumper to confirm it is rated for the that kind of application. It is likely they will say it is not rated for that use and then I recommend using a hitch like # C13704. If it is, then I would use the RV Bumper 2" Trailer Hitch Receiver - Clamp-On # S64025 along with a metal spacer to stabilize the hitch. Then use the Swagman Original - 3 Bike Rack for 2" Trailer Hitches...
view full answer... - Can Swagman Dispatch S44FR Be Used with Bumper Mounted RV HitchYes, you can use a bumper mount RV hitch receiver, like the Swagman # S64025 to mount the Swagman Dispatch 2 Bike Platform Rack # S44FR. The # S64025 receiver attaches to your 4x4 continuous-welded steel bumper and provides the 2 inch opening needed to mount the Swagman Dispatch (RV approved) bike rack. The closest part of the Dispatch is 12 inches from the center of the hitch pin hole so it will definitely clear the spare on the back of your Rockwood Roo 19. The rack can carry up to two...
view full answer...
- Trailer Hitch and Related Items for 2007 VW Passat Wagon to tow Pig Cooker TrailerWe can help you with everything you need to get your Passat wagon ready to tow your bar-b-q trailer. It is a good idea to check your owner's manual to confirm the car's towing capacity. The hitches offered for your Passat are all light-duty 1-1/4-inch Class I types that can be seen on the link provided. These will fit as long as you do not have the 4Motion version. I suggest the Curt # C11096 along with ball mount # 3594. The hitch's 2000-lb trailer capacity will be fine for your 1500-lb...
view full answer... - Recommendation for a Bike Rack on a Cougar 302 Trailer with Slide Out Storage BumperYou will have to contact the manufacturer of your travel trailer to see if it is rated for weight carrying capacity. I would ask if it can carry a 3-4 bike rack either extended or retracted since there is likely less capacity when extended than when retracted. If the bumper is 4 to 4-1/2 inch continuous welded square steel construction and the manufacturer allows the addition of a bike rack to the bumper then you could use the Swagman 4 Bike Carrier RV Mounted Bike Rack, item # S80600...
view full answer... - Hitch Recommendation for 2003 Newmar Kountry Star Class A MotorhomeWe offer both frame-mount and bumper-mount trailer hitches for use on the rear of a motorhome like your 2003 Newmar Kountry Star Class A. The bumper-mount hitch you referenced, Swagman # S64025, is intended for bumpers that are continuously-welded across their entire length. This hitch can be used only with an RV-approved bike rack. It cannot be used for towing or with cargo carriers. The link provided will let you see all available bumper- and frame-mount RV hitches. For a frame that...
view full answer...
Do you have a question about this RV and Camper Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Jacob T
Video Edited:
Zach D
Video Edited:
Jonathan Y
Updated by:
Adele M
Updated by:
Matthew S
Updated by:
Jenny M
Installed by:
Cole B
Installed by:
Randy B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kevin
6/18/2021
The receiver itself is great. I still have it on my camper. My campers bumper on the other hand was not up to the task of stress that a fully loaded 4-bike rack put on it. The bumper could probably handle 1 or 2 bikes just fine but the rack I have puts too large of a moment on the thin wall square tube bumper.