Replacement Head for Reese Weight Distribution System - Round Bar
(43 reviews)
Price: $223.28
In Stock
Replacement Head for Reese Weight Distribution System - Round Bar
Item # RP58112
Retail:$432.40
Our Price: $223.28
You Save: $209.12
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (43)
- Q & A (0)
- Videos (1)
- Photos
Reese Accessories and Parts - RP58112
- Weight Distribution Hitch
- Head
- Round Bar
- Reese
Adjustable head assembly works with Reese round-bar weight-distribution systems (RP61009, RP66087, RP66088, or RP67509). Mounting hardware included.
Features:
- Replacement weight-distribution head fits Reese systems with round bars (RP61009, RP66087, RP66088, or RP67509)
- Forged, raised ball platform eliminates need for raised hitch ball
- Mounting hardware and block-style washer included
- Requires a hitch ball with 1-1/4" diameter shank (sold separately)
- Quantity: 1 replacement weight distribution head
58112 Reese Weight Distribution Adjustable Ball Mount with Hardware
California residents: click here
Video of Replacement Head for Reese Weight Distribution System - Round Bar
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Reese Weight Distribution Hitch - Replacement Head - RP58112
Hello everybody. This is Jeff at etrailer.com. Today I'm gonna take a look at this replacement head for the Reese Round Bar Weight Distribution System. Now this adjustable head assembly works with the Reese Round Bar Weight Distribution System. This will work on the Reese Systems, part number RP61009, RP606087, RP606088, or the RP67509. All four of those systems we do sell separately on a website.
This part here is just the forged raise ball platform eliminates the need for a raised hitch ball. Now this will require a hitch ball with a one and a quarter inch diameter shank which we do sell separate on our website. It's usually listed on this product page as a related product. But basically your hitch ball will go right in here. So this opening is one and a quarter inches.
Now all the mounting hardware and the block style adjustment washers are included. Also, they do include the shim plate right here. And then this portion here is just saying bushing that if you happen to go down to a one inch diameter hitch ball shank you would put this reducer bushing in here and then install your hitch ball. Now this is for a quantity of one replacement weight distribution head. But that should do it for the review on the replacement head for the Reese Round Bar Weight Distribution System.
.
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Product did not meet expectations
- etrailer mistake
- Manufacturer issue
Customer Reviews
Replacement Head for Reese Weight Distribution System - Round Bar - RP58112
Average Customer Rating: 4.7 out of 5 stars (43 Customer Reviews)
Adjustable head assembly works with Reese round-bar weight-distribution systems (RP61009, RP66087, RP66088, or RP67509). Mounting hardware included.by: geOrgeC03/24/2016
The original was badly worn as it was never said by the dealer that the spring bars (hardened steel) needed lubrication! So they ate into the casting, ruining it. Needed grease fittings, or a hardened sleeve, so this replacement was needed... Worked perfect, I had the tools, replaced the ball as well, and it's still in great shape, now that I use a heavy grease, rubber gloves, and take better care of it! The one image shows the damage... Thanks for all you do!
by: Jim T.10/08/2014
My original Reese head the tab for one of the weight bars broke off and I could not use the weight bar. I ordered the replacement head from Pat at etrailer on Monday and I got it on Wednesday. When I got the head it fit right on and had no problem installing it. We towed the camper that weekend and it work great.
My only complaint is Reese does not make these in the US any more. They are now made in China. Reese has added more metal to the weight bars locking tab so hopefully this will help the tabs from breaking.
This was the second item I had ordered from etrailer and their service and web site are great. I will definitely order from them again.
by: Floridad08/14/2012
The top holes on my Reese round bar hitch head had worn after ten years of towing, allowing the round bars to slip out when hitching up. after nearly busting a toe, I looked at replacement hitches. Ouch! This replacement head saves me hundreds vs. buying an entire new hitch. E-trailer upgraded my shipping and I had it in three days, also the best price I found locally or online. If you have to move your hitch from vehicle to vehicle, or tow multiple trailers as I do, the adjustment washers on this Reese hitch make adjusting the angle of the head a two minute process.
by: Jeff R03/11/2017
The hitch is great. I needed a replacement for an old one that's the tabs broke off of. Was very happy e trailer carried what I needed.
by: SW06/20/2017
Very helpful in finding the correct part. Had to send pics, and they were able to determine the correct part.
Many on line issues with this part due to the tab breaking off that the bars slide into. They re-enforced the tabs by adding more welding material. That is good, I guess, but now you can not get your bar on due to the extra welding material. Its at least an 1/8 of an inch thicker if not more. If you have a grinder, just grind it flush like your previous model, and it will work again. Otherwise, return it, go buy a grinder and grind it smooth, or find someone with a grinder.
One of the things no one tells you is you are supposed to use lube with these parts. Make sure you lube these, and you will probably get a few more years out of them.
by: Robert07/21/2014
Overall this seems good and sturdy. Have used it tow a 4000lb trailer without the distrubtion bars. Disappointed that the included Washers were completely rusted at the 3 week mark from being installed. Also didn't realize that this head would require very specific bars.
by: Sam S07/20/2016
I needed a part for a ten year old weight distribution hitch on a travel trailer. eTrailer had the right product at the right price. Delivery was prompt. Everything fit well. I'm a happy camper!
by: Les 11/12/2021
Just what I was looking for and Vicky was very helpful. I wanted to replace an exiting part and the part number I had was outdated. Vicky Checked and found the right part number. Very pleased.
Les
11/14/2022
The replacement head has been working perfectly, no issues.
by: Bob C07/13/2013
We have not used it, however, we have prepared it and it will work out perfect for our 2007 Chevy Tahoe & 2007 Trailrunner. Quality looks good, well made just like our previous Reese hitch head. I was not in a rush to receive it as I prepared to have it ordered well an advance, so delivery time was acceptable (3-5 days) and fees were free over $150.00. A blessing since its a weighty item.
by: Todd H 06/04/2016
This replacement part was easy to order and shipped the next morning. Part was identical to the original. This is my second order through etrailer and they are nice to deal with.
Todd H.
6/4/2017
The replacement head for my weight distribution hitch works like the original. No problems.
by: Gary12/04/2015
this is the part I was looking for. Beats replacing the entire hitch assembly and a lot cheaper. The first one lasted me approx. ten years so this is perfect! Etrailer is GREAT to work with. They have a great web site for finding your parts and they ship'm right out. Good people!
by: Christopher Thompson05/07/2015
Product fits perfect with my already existing weight distribution thank you for the promt delivery as I have a fishing tournament over 200 miles away and I know with perfect confidence my travel trailer will make it there perfectly safe
by: Jesse06/12/2019
exact replacement. perfect fit. best price on the net. fast shipping. all good
by: Dan R. 07/08/2017
I am completely satisfied with this product, the ball mount. It is better made and stronger than the original product that I replaced.
by: Gregory10/01/2018
Product worked great. Just as the gentleman at etrailer said it would.
by: Greg07/19/2017
Good solid construction! I have put 10,000 miles on this hitch and no sign of wear.
by: Bruce. B12/13/2010
Replacement weight dist hitchI was extremely pleased with and the prduct quality, ease of order, quick delivery and follow up. i wold strongly recommend etrailer.com to anyone looking for trailer prodicts.
thank you for great service.
by: jim p08/10/2016
super fast delivery and at a very great price, thank you etrailer.
by: Rick08/25/2018
Exactly what i was looking for, super quick shipping, and a joy to get it quick to use on a trip that was sprung on me
by: Rick08/25/2018
Exactly what i was looking for, super quick shipping, and a joy to get it quick to use on a trip that was sprung on me
by: Anthony Ramirez11/04/2016
Like the fact it came with directions to properly set it up and was cheaper than buying local speedy delivery
Anthony R.
11/15/2017
Still doing great thank you for checking
by: Mark02/25/2021
Previous version had clean sharp lines, the replacement looks like a poor sand casting. Makes me question the quality of the iron used in the casting.
by: Wade R.08/15/2011
Just in time. Perfect & convenient service from etrailer.com &UPS.
by: Ken 09/26/2018
The head was a perfect fit. Its working fine. We had help installing it,as we didn't have big enough tools to do the job. love it!
by: JEFF Frost07/08/2017
I was very pleased with the service and help I received. I was kind of in a time crunch and in dire need of this part and I had awesome service and very efficient delivery ... thank you so much.
25
43
Show More Reviews
See what our Experts say about this Reese Accessories and Parts
- The Replacement Round Bar Head 58112 will Accommodate a Hitch Ball with a 1-1/4 ShankThe weight distribution heads will always have a 1-1/4 inch hole for the ball shank. Therefore, the replacement round bar head, part # RP58112, will accommodate a hitch ball with a 1-1/4 inch shank.
view full answer... - Can an Equal-i-zer Weight Distribution Shank Be Used in a Reese Weight Distribution SystemYes, the Equal-i-zer Weight Dist Shank # EQ90-02-4900 will work with the Replacement Head for Reese Weight Distribution System # RP58112. Since this Reese weight distribution system does not use stacked washers for changing the angle of the ball mount the # EQ90-02-4900 will be able to work with it since it has the same 1-1/4" spacing between the holes on the shank.
view full answer... - Reese Weight Distribution System Recommended for 1500-lbs of Tongue WeightReplacement head assembly # RP58167 is for trunnion bars like # RP58369 so it will not work for round bars. Instead use part # RP58112. You can use your old shank since it will have the same design. Since your system is older and you need to upgrade it too I suggest you replace the entire set-up. That way you have no concerns about old and new parts fitting properly and you'll have the comfort of knowing that everything is new and in good shape. For a loaded trailer tongue weight in the...
view full answer... - Does Reese Weight Distribution Head 58112 Fit Shank 64970Yes, the replacement Reese weight distribution head part # RP58112 that you referenced does fit the shank part # RP54970 that you also mentioned.
view full answer... - Replacement Head Recommendation for a Draw Tite Weight Distribution SystemMost likely if you have a round bar WD system you would need the # RP58112 or if a trunnion part # RP58167, but since I don't know how old your system is it would be hard for me to say for certain. The best option I could make would be for you to check out both of these head to see if they match up to what you currently have and go with whichever one matches your spring bar style.
view full answer... - Availability of Draw Tite Weight Distribution Head Assembly for Round BarThe Reese and Draw-Tite brands are both sister companies that are part of the Cequent Performance Products Group based in Michigan. It is indeed possible that a particular set of Reese weight distribution spring bars may be compatible with a particular Draw-Tite branded head assembly. In order to confirm this with the technical team at Cequent I will need to know the actual part numbers involved. Most likely if you have a round bar WD system you would need the # RP58112.
view full answer... - How to Further Tilt Head of Reese Weight Distribution System RearwardIf you're unable to tilt the weight distribution head further toward the trailer, the head is already set to its furthest rearward tilt. To lower the ends of the spring bars by tilting the heat toward the trailer, you'll need to lower the weight distribution head by one set of holes on the shank. Once you do that, the ends of the bars will be lower. You might find that you'll need to adjust the tilt further toward the tow vehicle to get the desired height. I've linked to the install/setup...
view full answer... - Replacement Head for Reese and Pro Series Round Bar Weight Distribution SystemsThe Reese round bar weight distribution systems and Pro Series round bar systems are fundamentally different and the parts are not interchangeable. For a Reese round bar system use head # RP58112. For a Pro Series round bar system use head # PS58442.
view full answer... - Reese Drop Weight Distribution Shank Recommendation Where 8 inches of Drop is NeededYour current 600 lb Reese spring bars should work in the Replacement Head # RP58112 that you referenced which is also compatible with the Reese Weight Dist Shank # RP3344. Unless your current WD head is broke you would not need to purchase a new one to use the # RP3344. Your old head should work with it as well.
view full answer... - Replacement Parts For Reese Straight Line Weight Distribution SystemIt looks like you have parts of two different systems. One is parts is the dual cam arm of the Strait-Line Weight Distribution System w Sway Control - Round Bar # RP66087 and the other is a Draw-Tite Pro Series # PS58442. I recommend the Replacement Head for Reese Weight Distribution System - Round Bar # RP58112, along with the Replacement Round Spring Bar for Reese Weight Distribution System - 800 lbs TW # RP58114 if your bars are not these as the straight line system will suite you...
view full answer...
- Parts Needed to Convert Pro Series Weight Distribution System to Strait-Line Dual Cam Sway ControlYou will need to but new spring bars, a new weight distribution head, and the sway control unit itself, but yes you can do it. The reason you need to replace the spring bars is that you need the spring bars with the bend ends for the cams to ride on. Your current weight distribution head is not compatible with the heavy duty spring bars. For a replacement head you will need the Replacement Head part # RP58112. Last, but not least you will need the dual cam system. For that you would...
view full answer... - Recommended Round Bar Hitch Head for Reese Weight Distribution SystemThe Replacement Head for Reese Weight Distribution System - Round Bar # RP58112 will work with all Reese round bars that insert and twist for installation. I've attached a photo to assist. As long as the top of your round bars look like # PS58440, they will work well with this hitch head.
view full answer...
- Replacement Head and Spring Bar Recommendation for Older Reese Strait Line SystemI'd highly recommend replacing the spring bars as well as the weight distribution head. The bars are under a tremendous amount of strain, and when they're worn, their weight bearing capabilities could be negatively affected. Reese no longer makes a 1000 lb capacity round bar. You'll want to go with either the # 58338 1200 lb bar or the # RP58114 for 800 lb bars, depending on your fully loaded and ready to tow tongue weight. The bars are sold individually. For a weight distribution head,...
view full answer... - Replacement Weight Distribution Head Recommendation for 12,000 lb Reese Weight Distribution SystemBased on what you described we have two options that should be what you need. If you have a trunnion (square bar) setup the head you would need is the part # RP58167. Or if the spring bars are round the part # RP58112 would be what you need.
view full answer... - Will the # RP58112 Weight Distribution Head Work With a Pro Series Round Bar SystemThe Reese Heavy Duty Round Bar Replacement Head, item # RP58112, will work with your Pro Series weight distribution system if the adjustment washers are 6 sided silver washers with no ridges. If you have rectangle adjustment washers that are black and have 3 ridges on them then you will need the Reese Pro Series RB2 Round Bar Replacement Head, item # 58333.
view full answer... - What Size Socket is needed to Tighten Bolts on Reese Round Bar Weight Distribution HeadI went out to the warehouse and the large 3/4 inch bolts used on the Reese round bar weight distribution head # RP58112 require a 1-1/8 inch socket or wrench. For information on torque specs please refer to the instructions I have linked for you.
view full answer... - How to Identify Brand of Trailer Weight Distribution System for Selecting Replacement PartsThe weight distribution hitch head assembly where your round spring bar installs will usually have some branding or other information such as a safety/warning sticker, or possibly a number cast into it. The remaining spring bar may itself have a part number too. Check your remaining bar for any information such as a part number or weight rating. I linked our main page for replacement parts for weight distribution systems. We offer head units like Reese # RP58112 (note in its photos the...
view full answer... - Replacement Head for Reese Weight Distribution # 61241We've checked with Reese in the past and they have told us that the # RP58112 was once the 61241 so this would work great as a replacement head.
view full answer... - Replacement Reese Weight Distribution Hitch Head Compatible with Round Spring Bar # RP58114The Round Spring Bar # RP58114 that you have is for the Reese Strait-Line # RP66087 or the Weight Distribution System # RP67509. Both of these options use the Head for Reese Weight Distribution System # RP58112 as the head so you will want to go with this part instead of the part # 58333 that you referenced.
view full answer... - Availability of Left Side Friction Sway Control for Reese Round Bar Heavy Duty Head # RP58112There are no heavy duty weight distribution heads available with two friction sway control ball mounts. If you need two friction sway controls you would be much better off to upgrade to the Dual Cam High Performance Sway Control, item # RP26002. This sway control system will work with the Reese Heavy Duty Round Bar Weight Distribution System, as long as the bars have the curved ends. If you need a friction sway control added to your trailer you may want to check your trailer tongue weight....
view full answer... - Replacement Head Unit for Reese Weight Distribution SystemThe linked page displays the Reese replacement parts for weight distribution systems. These include heads for both trunnion bar and round bar systems. If your head has holes on the lower portion through which L-shaped bars are inserted then you have a round bar system. If the bars are straight and fit into trunnions like # 58097 then you have a trunnion type system. For round bar setups we have head # RP58112 and for trunnion bar setups we have head # RP58167.
view full answer... - Replacement Weight Distribution Head Recommendation for a 1,200 Reese Round Bar SystemThe Replacement Head for Reese Weight Distribution System # RP58112 will work as a replacement head for your 1,200 lb round bar system. The S1 or S2 stamped on the side of the head doesn't make a difference.
view full answer... - Replacement Head Recommendation for a Reese 61009 Weight Distribution SystemThe correct replacement head you would need for your Reese 12k round bar weight distribution system you have is the part # RP58112 and not the part # 58333 that you referenced.
view full answer... - Do I Need Sway Control for a 6800 Pound Travel Trailer Behind a 2005 Toyota TundraYou may need some sort of sway control system. The diesel dually has two advantages. The wider tire and axle setup will make the trucks rear end more solid when talking about side to side movement. His truck also has a heavier suspension and it would take a significantly heavier trailer to get the truck to rock from trailer. Depending on what weight distribution system you have, you may be able to use a Dual Cam sway control system. The Dual Cam systems significantly out-perform the friction...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Written by:
Lindsey S
Installed by:
Jeff D
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jeff R.
3/13/2018
Exactly what I needed. Great quality and has held up better than my original.