Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
(73 reviews)
Price: $51.06
In Stock
Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
Item # AKIHUB-545-2-G-2K
Our Price: $51.06
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (73)
- Q & A (0)
- Photos
etrailer by AxleTek Trailer Hubs and Drums - AKIHUB-545-2-G-2K
- 5 on 4-1/2 Inch
- For 2000 lbs Axles
- Hub
- 10 Inch Wheel
- 12 Inch Wheel
- Standard
- 1/2 Inch Stud
- L44649
- L44649
- etrailer
Marine-grade hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. Galvanized finish is rust resistant.
Features:
- Marine-grade trailer hub assembly fits idler axles
- Bearings, races, seal, grease cap, and lug nuts are included
- Sturdy iron construction
- Galvanized finish offers excellent corrosion resistance
- Ideal for use on a boat or snowmobile trailer
- QAI and CSA certified
Specs:
- Application: 2,000-lb trailer axles with BTR spindles
- Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
- Wheel size: 10" to 12"
- Bolt pattern: 5 on 4-1/2"
- Wheel stud dimensions: 1/2" diameter x 1-5/16" long
- Grease cap flange diameter: 1.988"
- Weight capacity: 1,000 lbs
- Limited 1-year warranty
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: L44649 (1.063" inner diameter)
- Outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner race: L44610
- Outer race: L44610
- Grease seal (included): 10-9
- Inner diameter: 1.50"
- Outer diameter: 1.987"
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
H-150-97 AxleTek Trailer Idler Hub Assembly for 2K Axle with Hardware - 5 on 4-1/2 - Galvanized
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Alternate product found
Customer Reviews
Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized - AKIHUB-545-2-G-2K
Average Customer Rating: 4.6 out of 5 stars (73 Customer Reviews)
Marine-grade hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. Galvanized finish is rust resistant.by: Elvis06/12/2023
Hubs arrived poorly packed, which resulted in the bearings being damaged in the box. Etrailer sent new bearings out however this still caused me to have to wait even longer to get my trailer back together. All of this could have been fixed by proper packaging before shipping.
by: Mark04/16/2024
Threads were flattened on some of the studs from the hubs tumbling around in the box. Brown packaging paper was in the bottom of the box but offered no protection. Hubs could have been rapped with the brown paper to prevent metal to metal damage. Just saying what it is...
by: Richard05/01/2024
Exactly what I needed to renew an older trailer.
by: Tony 05/09/2024
So quick and easy and helpful and they even upped my shipping time with no extra costl
by: Chad04/06/2024
Going to be used as a spare for the boat. A bearing was damaged in shipping, but customer service was awesome. Great company!
by: Paul 04/21/2024
Fast and accurate service, even was delivered a day early
by: Mike B03/27/2019
I feel very comfortable having put these on my Jet Ski Trailer. Races already installed, greased everything up and it rolls like a champ. I did have to change the seals on them due to my trailer needing a smaller diameter seal.
by: Aaron02/02/2019
Hubs are well built with races already pressed into place. Lugnuts included. Galvanized to keep them rust free for years. One thing that could be better is package of bearings. They were in a bag with lugnuts, grease cap, and seal. Bearings might get damaged but overall great product.
by: Guy 02/13/2024
Product was exactly as described and was packaged well. The race sleeve was already installed which made assembly very easy.
Would purchase again.
by: James01/30/2024
Good setvice. Just what I ordered.
by: Michael 08/01/2023
I will always get my trailer needs here it's easy and convenient
by: Greg07/18/2019
Will at etrailer was very helpful in determining what parts I needed on an old and not maintained jet ski trailer. The hub, bearings etc got here a day or two earlier than I thought I would get them. Installed them the following morning and everything fit perfectly.
I will use again and definitely would recommend.
by: Jon 04/14/2023
Delivered timely and product as specified. Not the first time I've ordered from e-trailer and as always they are good to their word
by: Michael 08/28/2022
These fit perfect
They allowed me to bolt on some nice American racing rims with the Ford bolt pattern
The boat trailer looks so much better now
Thank you for a good quality product and fast shipping
by: Kenny12/05/2017
Dust covers do not fit hub. They are to wide at the base to fit into the supplied hub. I tried sanding them down and also gently using a rubber mallet while rotating around the cover to try and get it in. Still do not fit, I'm a pretty experienced shop worker as well.
Heather A.
12/8/2017
Kenny, Thank you for your review. The grease caps that come with this hub are designed to fit a 1.980 hub bore. Sometimes it can be a tight fit. If you tried tapping them in with a rubber mallet and it did not work, you may want to measure the diameter of the grease cap.
Kenny
12/8/2017
Looks like the diameter is the right size. I think the spindles are just a little to long/deep for the cap.
by: David08/24/2022
Hubs are ok, were sent with cheap Chinese bearings, which I refuse to use on a trailer for a $50,000 boat. Had to order USA bearings from another supplier
by: Robert07/14/2017
Short one lug nut, other than that all products look good.
Can't give you 5 stars.
Robert
7/15/2018
Well I can say I dont like the Chinese wheel bearings so much had one go out. First time i had a wheel bearing ever go out. It was the front one that didnt make sense. Had to leave the boat along side the Road and i didnt like that to much.
by: Ken02/03/2022
The hubs and bearings were all mfg'd in China and seem to be just fine. They went together nicely and went onto the old groaty spindles with only a little persuasion. I think it might be worth saying that the "galvanized" finish on the hubs is really not traditional hot dipped galvanizing. . .perhaps some sort of electro plating. However, plain uncoated black iron hubs will last 20 years or more trailering into salt water, so it's certainly not an issue. The big takeaway here ought to be how great the customer service and delivery are, always, at etrailer. In this case it was Pamela who helped me work my way through what would be the right bearings and hubs. . .lovely lady who took good care of my confusion and uncertainty. And George let me know they'd shipped the morning after I ordered them at bedtime. Talk about quick! And they got to Seattle a day before promised. What's not to like!!?
by: Rick 11/09/2022
As usua with your company, excellent merchandise at very good price! I will continue to make etrailer my go to source!l
by: Jason10/15/2019
etrailer is the best, I placed a order for two hub assemblies, and two wheels with tires. shortly after ordering, they quickly informed me that the hubs were, out of stock, they recommended a suitable replacement, they changed my order to reflect and everything show up just two days later. quality parts, everything fit and functioned correctly. was able to get snowmobile trailer all ready for winter much cheaper and quicker then I anticipated. thank you etrailer, would order form again and again. fast response, knowledgeable, respectful and great products!.
by: Donald07/22/2019
Bought a used homemade utility trailer and the hubs were in such a neglected shape that I gave up on them. I got the galvanized hub kits and it was a snap to get the trailer going. I had already spent about 3 hours (in a hot storage building) on the old ones. With the hub kits it only took me about 11/2 hours from start to finish. It was worth every cent for the new ones. The ordering process made it very easy to get the correct parts.
Thanks,
Donald H.
by: Robert02/10/2021
Good product. Used in high salinity bay (saltwater use) has held up to corrosion.
Unfortunately I had to purchase separate size seals due to my trailer's axle size is different than what came with the kit.
by: Picky09/15/2017
The fit, quality and finish on the hubs and bearings seems OK.
When tapping the first dust cover in with a rubber mallet it dented. The second was too large and I was not able to install it. The thickness of the covers is so thin I think I could crush them with my hands. I ended up using the old ones.
This does not help my expectation for the life of the bearings.
by: Joseph08/13/2019
THE QUALITY OF THE TRAILER HUBS WERE OUTSTANDING.WHAT I LIKED MOST WAS THE RACES WERE INSTALLED.I NEEDED A GOOD QUALITY HUB ASSEMBLY FOR MY BOAT TRAILER AS I DRIVE ALOT OF LOGGING ROADS IN NORTHEN MAINE TO GET TO REMOTE LAKES AND PONDS.I GOT CONFIDENCE THAT THIS PRODUCT WILL HOLD UP TO THE ROAD CONDITIONS.I ALSO ADDED BEARING BUDDIES TO MAINTAIN THE HUBS FOR A LONG TIME TO COME
by: Craig 02/04/2017
Perfect match to replace a set of rusted-out originals and everything I needed was there. Very pleased with the etrailer.com site with all of the information to help make the right selection. Definitely raising the bar for on line shopping for replacement parts!
25
73
Show More Reviews
See what our Experts say about this etrailer Trailer Hubs and Drums
- Will Trailer Idler Hub Assembly AKIHUB-545-2-G-2K Fit Shorelandr SLB-12TM TrailerThe etrailer.com 5-on-4-1/2 Trailer Idler Hub Assembly # AKIHUB-545-2-G-2K will fit your trailer spindles since it uses the same set of bearings ( # L44649 which are indeed equivalents to part 4440160) and the same seal as the OEM part. The hub's included # 10-9 seal has an inner diameter of 1.50-inches and an outer diameter of 1.987-inches to match the spindle diameter and hub bore diameter, respectively.
view full answer... - Changing from Oil Baths to Bearing Buddies on an EZ Loader Boat TrailerYes, you will need to replace the inner grease seal when changing from oil baths to the Bearing Buddies. You will also need to make sure that there isn't any grease on the threaded portion of the hubs when installing the Bearing Buddy as this could compromise the seal when using a thread sealer like Permatex. I called EZ Loader and was able to get the information I needed for your trailer using the VIN. However, we do not have a 2-1/8" threaded Bearing Buddy that will work with your hubs...
view full answer... - How to Determine Replacement Hubs for Home Built TrailerUnfortunately yes, you'll have to pull the hubs to get the bearing numbers. The hub assemblies you referenced, part # AKIHUB-545-2-G-EZ-2K, include a grease cap with a rubber plug that is removable. This allows you to access the zerk fitting on your trailer's spindle, if you have one. If you have a zerk fitting on the spindles then you have E-Z lube axles. I've attached pictures of both spindles for you to see the difference. If you don't have E-Z Lube axles instead the same hub assembly...
view full answer...
- Replacement Hubs for 1997 FLOE Pro 100 Plus Snowmobile TrailerLuckily, FLOE International is still around. I was able to find that your 10 foot tilt single axle snowmobile trailer used an L44649 inner and outer wheel bearing. Your snowmobile trailer was equipped from the factory with idler hubs that had a 5 on 4-1/2 inch bolt pattern. Due to its being exposed to harsh winter conditions and possibly road salt, going with a galvanized hub would be recommended versus a painted hub like the # 34822545BX you'd looked at. I'd go with part # AKIHUB-545-2-G-EZ-2K,...
view full answer... - Hub Dimensions for the etrailer Trailer Hub and Drum Assembly for 2,000-lb Axles AKIHUB-545-2-G-2KWe don't have the hub height listed for the Trailer Idler Hub Assembly for 2,000-lb Axles # AKIHUB-545-2-G-2K but I was able to locate a technical drawing that shows this hub to have a height of 4" and a bore diameter of 2 1/2".
view full answer... - Determining Replacement Hub for Boat Trailer with H-1062-1 Printed on Back of HubThat number doesn't give me a cross-reference. To get a replacement you will need to pull the bearings out of the hub and on the face of both the inner and outer bearing there will be a number printed on the bearing face. If you can give me those numbers I likely can help you out with the correct replacement. I also will need to know the bolt pattern of your hub if you want to keep the same wheels. If you can't determine the bearing numbers, then you can use a digital caliper like...
view full answer...
- Are the Races Pressed Into the HubYes, the races come pressed in the hub. You will only have to insert and pack the bearings (check out part # L70025) and press in the grease seal. A hammer and a small block helps when tapping in the grease seal. We also have a 7-Piece installation set, part # PTW83020, that comes in handy if you do your own trailer maintenance.
view full answer... - Recommended Timbren Axle-Less System for Trailer Used for Salt WaterThe 400 lb Timbren Axle-Less Trailer Suspension System # A4WS440 has a standard black powder coat finish that does a good job protecting against the elements, but salt water will definitely be pretty harsh to this set so instead I recommend going with the kit # ASR400S02-G instead which uses a galvanized finish instead of the black powder coat. A galvanized finish will definitely hold up better to salt water and to help extend the lifespan of this kit I also recommend to spray down your...
view full answer... - Replacement Hub For EZ Loader Boat Trailer With 1-1/16" Straight Spindle and 1-3/8" SealWhile we do not offer a hub exactly with what you need you can easily use the Trailer Idler Hub Assembly # AKIHUB-545-2-G-2K and replace the grease seal for the Seal Set # BB60005 you found. Our hub is sold individually but the seals come as a set for one axle. This hub does have the common 5 on 4-1/2" bolt pattern found on EZ Loader trailers.
view full answer... - Can I Swap Out The 4 Lug Rims On My Pop Up Camper For 5 Lug Rims?It very well may be possible for you to swap out the 4 lug hubs on your pop-up for a 5 lug hub. It comes down to what size spindle/bearings are currently on the trailer. A lot of pop up campers will use a light duty axle rated for 3,500 lbs or less. For example a very common one is a 2,000 lb rated axle, which has a straight spindle and uses either the # L44643 (1" inner diameter) or the # L44649 (1.063" inner diameter) bearings. If you are able to remove one of the hubs you can measure...
view full answer... - What Spindle Does Trailer Hub AKIHUB-545-2-G-2K UseThe trailer hub part # AKIHUB-545-2-G-2K that you referenced uses a BTR spindle.
view full answer... - Replacement 5Lug Hub with L44649 Inner and Outer BearingsWe have exactly what you need with both a black powder coat finish # 8-258-5UC1 as well as a galvanized finish # AKIHUB-545-2-G-2K. These kits come with replacement bearings, a seal, a grease cap, and the matching lug nuts so as long as your spindle is in good shape you'll just have to pack the bearings into the hub and you'll be good to go!
view full answer... - Replacement Hubs for 1999 Load Rite 161250L Boat TrailerIf the surface of your spindles where the inner and outer bearings ride are 1.06 inches in diameter, you'll need hubs compatible with a L44649 inner and outer wheel bearing. The # AKIHUB-545-2-G-2K hub you'd looked at should be compatible with your spindles, you'll want to use a digital caliper like # PTW80157 and measure the spindle diameter where the grease seal rides which is known as the seal journal surface. If the seal journal surface is 1.50 inches in diameter, the 10-9 grease seal...
view full answer... - Replacement Trailer Hub for Boat Trailer with Timken Bearings 07100Based on the bearing dimensions that you have you have a 2,000 lb trailer axle so for a replacement hub the part # AKIHUB-545-2-G-2K would work. This has a 5 lug bolt pattern. If instead you have a 4 bolt pattern you'd need the part # CE13110.
view full answer... - How to Determine Replacement Hub For Boat TrailerI'm sure we can get you a hub assembly for your Shorlander boat trailer, though we don't have any way of knowing off-hand or cross-referencing what bearings/hubs you need. So in order to find the correct hubs you will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper measure your spindle to the thousandths...
view full answer...
- Replacement Hubs and Bearings for a 1-1/16 spindleIf you have a straight, 1-1/16 inch spindle, the correct bearing kit may be Bearing Kit item # BK1-150. This kit comes with the inner/outer bearings item # L44649, which has an inner diameter of 1.063 inches, along with a 1.500 inch inner diameter grease seal and item # L44610 inner and outer race. If you grease seal has a 1-3/8 I.D. you will want the Spindle Grease Seal Set for item # L44649 Inner Bearing and 1.980 Bearing Buddy item # BB60005. Another option since you are looking to...
view full answer... - Recommended Hub with 5 on 4-1/2" Bolt Pattern For Straight Spindle with L44649 BearingsSpindles are typically measured down to the 1/1000th of an inch and the closest bearing size for a straight spindle of that size would be the 1.063" # L44649 bearing. A 5 on 4-1/2" hub that uses that size bearings would be the CE Smith # CE13311, which is designed for 2700-lbs axles. You could also use the Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-2-G-2K if you need a galvanized hub. I've linked some review videos of these parts for you to have...
view full answer... - Recommended Trailer Hubs for 2,200 Pound Axle with L44649 Bearings and 5 on 4-1/2 Bolt PatternI recommend our etrailer hubs for your trailer. I've linked the complete selection that fits with your # L44649 bearings. Which ones are exactly the right ones depend on your trailer's wheel size and if it has brakes or EZ lube spindles: Idler hubs 12 inch or smaller wheels: Standard spindles - # AKIHUB-545-2-2K EZ lube - # AKIHUB-545-2-EZ-2K Idler hubs 13 to 15 inch wheels: Standard spindles - # AKIHUB-545-2-LF-2K EZ lube - # AKIHUB-545-2-LFEZ-2K Hub and drums for brakes: Standard spindles...
view full answer... - Replacement Hub for 1989 Ranger TrailerJudging by your photo, your trailer would use an idler hub, not a hub drum. Assuming you have 5 lug on 4-1/2 inch bolt circle wheels that use an # L44649 inner and outer wheel bearing, you have a few choices. Rather than the painted hub, I'd recommend going with a galvanized hub for greater corrosion resistance. Dexter hubs are manufactured in the US, which is what I'd recommend. For an 8, 10 or a 12 inch wheel, use # 8-259-50UC1 for a standard spindle or # 8-259-50UC1-EZ for the EZ Lube...
view full answer...
- Replacement Hub for Spindle With 1" Inner Diameter BearingsThe # AKIHUB-545-2-G-2K uses # L44649 bearings with an inner diameter of 1.063" and also has a 5 on 4-1/2 bolt pattern. Since you need # L44643 bearings with an ID of 1" and a 4 on 4 bolt pattern the correct part would be the Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized # AKIHUB-440-2-G-1K. If you have an easy grease/EZ Lube axle then you would need the Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized # AKIHUB-440-2-G-EZ-1K instead.
view full answer...
- Trailer Wheel Hub to Match 2,200 Pound Lippert SpindleWe do carry the hubs and bearings that fit spindle # LC142161. The bearing kit is part # BK1-150 which uses # L44649 for both the inner and outer bearings. The hubs that fit come in either a 4 on 4 bolt pattern, like idler hub # AKIHUB-440-2-2K, or 5 on 4-1/2 bolt pattern, like part # AKIHUB-545-2-2K. We also have the same hubs galvanized; part # AKIHUB-440-2-G-2K for the 4 on 4 and part # AKIHUB-545-2-G-2K for the 5 on 4-1/2. There's also a hub and drum that fits if you need brakes...
view full answer... - Replacement Galvanized Trailer Idler Hub For a Continental EC39 Boat TrailerYour Continental EC-39 Boat Trailer will need a Trailer Idler Hub Assembly # AKIHUB-545-2-G-2K. I was able to confirm with Continental that you have a spindle that uses 1.063" bearings on a straight spindle with a 1.249" ID grease seal. You will need to replace the grease seal that comes with the kit with a Double Lip Grease Seal # 34823. If your Cotter Pin # 165649, Washer # SW1000, or Spindle Nut # 165686 are damaged or missing we have those items available for replacement as well....
view full answer... - Recommended Firestone Air Springs For 2007 Ford F-150 & Trailer Axle Compatibility w/ 12 Inch WheelFor your 2007 Ford F-150, I recommend the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F2350 which are a confirmed fit. The fact that it is not heavy duty suspension and without 5th wheel hitch doesn't come into play. These air springs will mount to your frame and current suspension system. It will allow you to adjust air as needed between 5 psi and 100 psi. If you want to bypass the manual adding and subtracting of air, you can add the Firestone Air Command...
view full answer... - Picking Out Replacement Hub for 1,000 lb Motorcycle TrailerTo pick out correct hub for your trailer we would need more info. We would need to know the wheel bolt pattern, the current bearing numbers OR diameter of the spindle where the bearings rides or axle brand and capacity. I would be willing to bet your trailer needs a 2,000 lb axle hub like the part # AKIHUB-545-2-G-2K for a 5 bolt hub or part # AKIHUB-440-2-G-1K for a 4 bolt.
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Installed by:
Jeff D
Installed by:
Randy B
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Video Edited:
Chris R
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Greg
7/19/2020
Still working great.