CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
(324 reviews)
Price: $26.58
CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
Item # CE23102
Retail:$32.74
Our Price: $26.58
You Save: 19%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (324)
- Q & A (0)
- Photos
CE Smith Trailer Suspension Parts - CE23102
- U-Bolt Kits
- Boat Trailer
- Snowmobile Trailer
- Square Axle - 1-1/2 Inch
- 3-3/8 Inch Long
- 2000 lbs
- 3/8 Inch Diameter
- CE Smith
Mount your square, 1-1/2" wide axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates, nuts, and washers included. Zinc plating resists rust and corrosion - great for boat trailers.
Features:
- Mounting kit attaches trailer axle to leaf springs
- Galvanized plates and zinc-plated hardware resists rust and corrosion
- Made in the USA
Specs:
- Application: 1-1/2" wide, square axle
- U-bolt dimensions:
- Inner:
- 3-5/16" Long x 1-5/8" wide
- Overall:
- 3-5/8" Long x 2-3/8" wide
- Inner:
- Thread dimensions:
- 2-1/2" long x 3/8" diameter
- Mounting plate dimensions: 3-3/8" long x 3" wide
- Kit includes:
- 4 U-bolts
- 2 U-bolt plates for 1-3/4" springs
- (8) 3/8" Hex nuts and washers
23102 CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc - CE23102
Average Customer Rating: 4.8 out of 5 stars (324 Customer Reviews)
Mount your square, 1-1/2" wide axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates, nuts, and washers included. Zinc plating resists rust and corrosion - great for boat trailers.by: Scott 01/10/2024
The u-bolts have stood up pretty well to the elements and strong enough to pull my full 2k pound trailer. So far so good with the zinc protection, hope it lasts as good as other finish options
by: Tamera W01/31/2024
They worked great. Moved the axle from above the springs to under.
by: John 09/19/2023
Fit around axle is good but bolts could stand to be at least an inch longer, only tighten up flush with plate under my 5 leaf springs, could not use lock washers had to use red Loctite.
by: Charles 07/31/2023
I did a complete overhaul and upgrade on my boat trailer. I put stiffer springs on and this bolt kit was a must have. e trailer was the only place that had enough inventory to get me the right size ubolt. Has been flawless in use.
by: Dante04/18/2024
So far these have held up well. Been a year
by: Cory07/07/2016
Just ordered another set. Build my own axles with spindles and hubs from e trailer along with 1 1/2 " square tubing. This u bolt kit is complete and the best price I have found. Picture wont show the u bolts but it will show you what I do with them.
by: Brad07/16/2020
My old u bolts and leaf springs were rusted through so bad I had to cut them off. I had such a hard time finding replacement parts for my little boat trailer with such a small 1 1/2 inch axel. This was exactly what I needed! Fit perfectly with my New 24 5/8 x 1 3/4 inch leaf springs.
by: Steven 09/15/2023
I was able to locate what I needed without a part number because of the efficiencies of your search engine and thorough description of the product. I’d been to a half dozen local locations before checking with you. Shipping was timely, so it worked out well, thanks.
by: Eric04/26/2024
Looks Great !
works Great !
Thank you,
by: Russ07/27/2017
Ordered early Friday morning before business hours. Parts arrived the following Wensday afternoon via UPS.
The only concern I had with the two springs I ordered was the cheap nylon bushing they came with. I would have preferred neoprene but the springs were stamped made in China so......
Springs and hanger kit I ordered went together and look good.
by: Darald05/26/2019
They worked great. Replaced my old rusted axle brackets with ease. And for a lot less than what the local trailer shop wanted to charge.
by: Tom 02/13/2024
Wheel cut old ones off, installed 1 at a time to sucess !
by: Stephen08/15/2023
Looks to fit fine. I upgraded the nuts and washers to grade 8s.
by: Neil 03/26/2024
Good product fast delivery
by: Gordon 02/29/2024
Good quality parts, easy to order and fast delivery.
by: Scott L.12/08/2017
Replaced rusty springs on a 14' skiff trailer. Fit perfect, DIY for cheap in the driveway, it would've been easier with an impact wrench. Take their advice, etrailer is the best for a reason, get ALL NEW HARDWARE TOO!! I broke several fasteners removing them, if the springs are bad, so is the hardware. I have done three hitches and a set of leaf springs now with these folks. Their install videos and expert advice made it a breeze to save probably a couple thousand in labor at a shop.
by: Don 06/15/2023
works good with leaf springs.
by: James07/23/2022
This kit worked well for mounting 1 1/2" guide-ons on my trailer but they are not going to last long for my salt water application. Only the plate (which I didn't use) is zinc plated. The U-bolts, nuts and lock washers are plated with something but they are not zinc plated as indicated in the description.
by: Michael long 03/26/2017
This axle worked great on my trailer everything thing fit great
Michael L.
3/27/2018
Works good
by: Mary06/22/2019
Needed to replace springs on a kayak trailer, this kit did the trick. The things we like best about etrailer are the specific descriptions and videos. All we needed were a few measurements and ordering the perfect parts was simple. Trailer is ready for another great paddling season!
Mary
6/22/2020
Using this well described kit to rebuild my suspension was a great decision and it led to complete restoration of the whole kayak trailer. Better than new now!
by: Brian09/07/2023
Year after install still good
by: Rod10/20/2018
The product itself was good, however in my case the u-bolts ware to short to get full thread engagement or the lock washers. All I ended up using were the rectangle plates, nuts and washers. It would be nice If there was option to get longer u-bolts. The additional (longer bolts) and plates I had to fabricate, cost me more than your kit. I should have made all the parts myself. It still would would have cost me more, but the trouble I went thru would have been known up front. I will still use your company for other trailer parts, but I will now cautious.
Rod
Mike L.
10/23/2018
The u-bolt kit is designed for use with 1/2 square axles only. If used with the axle its intended for, they will fit perfectly.
by: William03/12/2020
Ordered new axel and hubs to replace my bent axel on older utility trailer. Instructions for ordering the correct parts was clear and easy. It was shipped the same day as ordered. Arrived in record time in great condition. Good quality. Perfect fit.
William
3/13/2021
Still going strong.
25
324
Show More Reviews
See what our Experts say about this CE Smith Trailer Suspension Parts
- Replacement Leaf Springs and U-Bolts For Karavan 1,000LB Single Square Axle Boat Trailer The 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles # SP-177275 are going to be the closest to what you have. Depending on the exact location your red string in relation to the end of the radius spring this may account for some of the difference in the measurements. You do appear to have plenty of clearance in your fenders if the springs are not as tall. Be sure to not reuse your current U-bolts as they appear to be for a 2" axle. The CE Smith U-Bolt Kit # CE23102 is specific...
view full answer...
- What Does the CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles # CE23102 Come WithThe CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles # CE23102 that you referenced includes two u-bolt plates, 8 nuts and washers, and 4 u-bolts. In other words it comes with two sets and not just one like you asked.
view full answer... - Dimensions Of The CE Smith Ubolt Kit # CE23102The CE Smith U-Bolt Kit for Mounting 1-1/2 inch Square Trailer Axles - 3-3/8 inch Long U-Bolts - Zinc # CE23102 is 3-5/8 inches long, and the thread length is 2-1/2 inches in length per the manufacturer. I attached a review link video below.
view full answer... - Do You Have A Suspension Kit With The 3-Leaf Double-Eye Spring for 2,000-lb Axles # SP-113275?We will not offer the 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles # SP-113275 as a kit as there are so many different options for the leaf spring when mounting to the trailer. The spring will come with a Nylon Bushing # TRBU11566 already installed. You can replace this with a Bronze Bushing # D014-077-00 if you intend to mount the leaf springs using Wet Bolts # 126B2 rather than a Shackle Bolt # 166081. Next you will have different U-Bolt Kits depending on your trailer axle....
view full answer... - How to Determine Correct Slipper Spring Replacement for 1,500 lb AxleWhat happens to slipper springs is that over time they elongate and flatten out, particularly if your springs are considerably older. The most important measurement you mentioned was the 26 inches from the center of the spring eye to the end of the spring. Based on that the closest slipper spring we have that could work is the 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long # SP-178275, which would work if you had a tandem-axle trailer. There are no slipper...
view full answer...
- Thread Length of the U-Bolts of the CE Smith U-Bolt Kit CE23102I spoke with my contact at CE Smith and he informed me that the threaded portion of the U-bolts of the # CE23102 are 2-1/2 inches in length.
view full answer... - Replacement Leaf Springs and U-Bolt Kit for Small Boat Trailer with Square AxleWe definitely have replacement suspension parts for your light boat trailer. Attached is a link to our selection of leaf springs for a 2,000 lb trailer axle. These are 3 and 4 leaf springs and to select the correct one you'll need to measure the distance from the center-eye to center-eye of your current leaf springs when the load is taken off of them. For a U-Bolt kit it looks like the CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles # CE23102 will fit the bill. Attached is...
view full answer... - Replacement U-Bolt Kit, Leaf Springs, Bolts and Shackles for 68 Aristocrat Lo Liner TrailerInstalling the U-bolts and plate like that would be fine, but I would recommend putting the plate on the leaf springs and running the U-bolts around the axle instead. The good news is you're replacing them so you can make that change when you install them. Once you have your axle measurements we do have some kits you could use. If it is a 2" square axle the # CE23103 or for a 1-1/2" square axle the # CE23102. If it is 1-3/4" you will need the # 175130 along with the # 116308. Since you...
view full answer...
- Replacement Axle Tube for a Habor Freight Model 90154 TrailerIn order to determine if we have a new axle beam that will work for you, we would first need to do some measuring. The measurements that will need to be taken are from the center of each spring seat on the axle you have now as well as the distance between the two hub faces. I have attached a photo of this for you as well. The most important measurement that you need to verify is the hub face as the spring seats can be moved. For example, if you have a hub face of 60" you can then use...
view full answer...
- Availability of U-Bolt Kit for 1-1/2 inch Trailer AxleFor 1-1/2 inch square axles we have the axle u-bolt kit part # CE23102 which comes with mounting plates as well.
view full answer... - Square U-Bolts to Use with CE Smith Axle CE Smith has a u-bolt kit part # CE23102 that was designed to be used with their axle part # CE33201GA-HUB that you referenced. This is the correct square size U-bolts for this axle.
view full answer... - Replacement 1-1/2 Inch Square Axle for a Boat TrailerI do have some options for you but none of our trailer axles match the exact measurements that you provided. Therefore, the best option we have for you would be to switch to an axle less system like the Timbren Axle-Less Trailer Suspension System part # A20RS545 which will replace the axle, leaf springs, and leaf spring hangers in light of a rubber suspension system that works to absorb road shock and support the trailers load better than standard leaf springs. The other option you have...
view full answer...
- Replacement Leaf Springs and Hardware for 2008 Venture Boat TrailerTo find replacement leaf springs you will need to know your axle capacity along with the length of your current leaf springs. If you don't already know the axle capacity I would try checking the axle tag to see if it is listed. If not, you can call Venture with the VIN and they should be able to tell you. Once you have the capacity go ahead and measure the length of your leaf springs. This is the spring eye to spring eye measurement. I have attached an article below which has a video...
view full answer... - Square U-Bolt Kit for Mounting Leaf Springs SP-177275 to 1-1/2 Inch Square AxleYou have done your homework because you are on the money with the correct U-bolt kit to mount the 2-Leaf Slipper Spring w/ Radius End for 1,000 lb Trailer Axles - 24-5/8" Long # SP-177275. The kit you mentioned, the CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles # CE23102 will work wonderfully for this application so you're all set. I have added links below to video reviews of both products as well if you'd like to check them out.
view full answer... - Replacement 26 Inch Long Leaf Spring and U-Bolt Kit for Lightweight Square Axle TrailerWe do have some parts that will work for your application! For leaf springs you'll want to choose one of the following based off of the weight capacity: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - # e77SR 6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - # e27SR Then for a U-Bolt kit we have the CE Smith # CE23102 designed for 1-1/2" square axles. Attached are some videos for you to check out.
view full answer... - Recommendation For Replacing Leaf Springs And HangersI am glad to make a recommendation for your needs based on the pictures and information you sent. We have a few options to consider for a 30 inch long leaf spring that is 1-3/4 inches wide. For an 1,800 lb axle that has 2-Leaf Slipper Spring with flat end option, you would use Item # e29SR. For a 2,900 lb axle that has 3-Leaf Slipper Spring with flat end option, you would use Item # SP-039275. A U-Bolt Kit for a 1-1/2 inch wide square axle for 1-3/4 inch springs is Item # CE23102. A...
view full answer... - Removing Square Axle from Leaf Springs to Replace Axle on 5x8 TrailerOn square axles, there is traditionally a hole that the leaf spring has a nub that fits in to act as that securing point that a spring seat on round axles would and then the u-bolts secure the axle to the springs. You can see this on the CE Smith Trailer Axle Beam with EZ-Lube Standard Spindles - Galvanized - 57-1/2" Long - 1.8K # CE33201GA and photos on part # CE23102. There is often a need once the u-bolts are removed to use direct downward force or even a pry bar to separate the springs...
view full answer... - Recommended Slipper Spring for Custom Kayak TrailerThanks for the photos with measurements. The 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long # SP-177275 are rated for 500lbs each for use with a 1000K axle. This will work with the inside to inside measurement you are seeking. You will simply need the 9/16 inch bolt # 166079. If there is any extra space in the hanger it won't be an issue with the bolt and bushing.
view full answer...
- Replacement Leaf Springs for Harbor Freight Folding TrailerThe best option we have for you is the 3-Leaf Double-Eye Spring part # e84SR with the Single-Axle Trailer Hanger Kit part # APS4. This option will replace the leaf springs and leaf spring hanger brackets which is needed because the new double eye leaf springs are 1-3/4" wide and the old slipper springs are 2" wide not to mention the length discrepancy and leaf spring hanger bracket height. The CE Smith U-Bolt Kit for Mounting part # CE23102 or part # CE23103 can then be used to complete...
view full answer... - Parts Needed For Adding 1,000LB Slipper Springs To a Cart With No SuspensionYou will need 2 of the Front # CE14016G and Rear # CE14017G hanger brackets to attach 2 of the 2-Leaf Slipper Springs # SP-177275 to your cart. You will need 2 of the Zinc Shackle Bolts # TRFA73Z916DLNZ to attach the leaf springs to the front hanger. If you can tell what shape and size axle you have I can help you find the U-Bolt Kit you need. We have some like the 1-1/2" Square # CE23102 or 1-3/4" Round # CE23000 depending on the size of your axle.
view full answer... - Switching From Slipper Springs to Double-Eye on a Single 2K Axle Trailer with Square AxleTo switch to double-eye spring suspension I recommend getting parts individually since the u-bolts cannot be swapped out of kits. The spring in the kit is # e84SR. We have a few different u-bolt kits for square axles including # CE23102 for 1-1/2 inch square axles. For a 1-3/4 inch square axles you can use u-bolt # 175130 and plate # 116308. And for 2 inch square axles we have # CE23103. You will also need a new hanger kit since double-eye springs use different hangers than slipper springs....
view full answer... - Upgrading Or Replacinging Axle, Hubs, Tires, Wheels And Springs On A 2008 Jet Ski TrailerHey Steve, I can definitely help with this. A lot to unpack here so I will do my best to cover everything. Let's start with the axle/spindles, since that will directly tie into what hubs, wheels and tires we end up going with. As far as the axle, we do not have anything with a 54" hub face (HF) measurement. We do have the CE Smith Trailer Axle # CE33201GA-HUB, which has a 57-1/2" HF measurement. It is rated for 1,800 lbs and the axle itself is a 1-1/2" square tube. This axle also comes...
view full answer... - Are Trailer Spring Seats Needed for Square Axles with Leaf Springs?Square axles normally don't have spring seats like a round axle but do have a hole for the leaf spring bolt to fit into. Take a look at the CE SMITH # CE33201GA-HUB for a visual. The U-bolt mounting kits will have a hole in the center for the other side of that leaf spring bolt to keep everything in line. If you have a 1-1/2 inch square axle use # CE23102. If you have a 2 inch axle use # CE23103.
view full answer...
- U-Bolt Kit For Replacing Leaf Springs On a Trailer With Square Aluminum AxleWhile I do not see we carry any slipper leaf springs close to your measurements we do have a couple U-bolt kits for you to select from with having a square axle. We have a kit for 1-1/2" Square # CE23102 or 2" Square # CE23103 axles. I may be able to help you find a viable replacement leaf spring to go to double eye or another type of slipper spring but I will need some photos of your hangers along with any weight capacity information on your trailer or axle.
view full answer...
Do you have a question about this Trailer Suspension Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Installed by:
Cole B
Updated by:
Wilson B
Written by:
Amanda M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
8/2/2022
I had the u bolts pulled from the warehouse so that I could take a look at them. The u bolts that I saw still had the zinc plated finish.