Will Trailer Idler Hub Assembly AKIHUB-545-2-G-2K Fit Shorelandr SLB-12TM Trailer
Question:
I have a Shorelandr SLB-12TM trailer. 56inch axle - part #64449. OEM Hub is part #4470337 - 1 1/6inch x 1 1/16, 5 bolt pattern. Can this be used as a replacement part for the OEM hub? OEM bearings are #4440160 which corresponds to Timken Set4 L44649. Thanks
asked by: Glenn
Expert Reply:
The etrailer.com 5-on-4-1/2 Trailer Idler Hub Assembly # AKIHUB-545-2-G-2K will fit your trailer spindles since it uses the same set of bearings ( # L44649 which are indeed equivalents to part 4440160) and the same seal as the OEM part. The hub's included # 10-9 seal has an inner diameter of 1.50-inches and an outer diameter of 1.987-inches to match the spindle diameter and hub bore diameter, respectively.
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.500 Inch I.D.
- 1.987 Inch O.D
- TruRyde
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: How to Measure a Trailer Axle
- Article: Trailer Tire Sizing
- Q&A: Troubleshooting Factory Trailer Wiring that has No Power
- Q&A: Replacement Hubs for 1997 FLOE Pro 100 Plus Snowmobile Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Spare Tire Recommendation for a Dual Jet Ski Trailer with 205 x 65 x 10 Load Range E Tires
- Q&A: Recommended Grease Seal w/ a 1.25 ID and a 1.98 OD
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement