Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Provide your trailer bearings with premium protection - replace your existing grease caps with Bearing Buddies. They provide an easy way to control the grease volume in your axle hub and have blue indicator rings to visually monitor levels.
Features:
Specs:
Replace your existing grease cap with a Bearing Buddy to ensure a safe, easy way to monitor and control the level of grease in your axle hub. To adjust the amount of grease in the hub, use a grease gun to add more through the appropriate fitting. Adding grease moves the Bearing Buddy spring-loaded piston outward 1/8".
The O-ring inside the barrel of the Bearing Buddy maintains a seal from the outside. The interior of the Bearing Buddy is pressurized, preventing water from entering the barrel and diluting the grease.
An automatic pressure-relief feature is built into the Bearing Buddy. When the device is full, grease will seep around the edges of the piston and into the barrel. This prevents overfilling that can damage the inner seal.
The blue indicator ring allows you to visually monitor the amount of grease in your hub. The ring should sit flush with the top of the cylinder. If the ring is below the top of the cylinder, add grease until the piston moves 1/8" outward.
Average Customer Rating: 4.9 out of 5 stars (372 Customer Reviews)
Provide your trailer bearings with premium protection - replace your existing grease caps with Bearing Buddies. They provide an easy way to control the grease volume in your axle hub and have blue indicator rings to visually monitor levels.
Ashley is the best.
Excellent product. Works as advertised. Helps keep water out of boat trailer bearings. Read instructions on how to fill with grease, and you won’t blow out the back oil seal.
Installed on a 2018 Carry-on 5x8 with 2k axle. I didn't have to remove the wheel at all. I simply popped the hubs off and inserted the bearing buddy's as per instruction and greased. Entire time for both wheels was less that 10 minutes.
The item I most wanted, the Bearing Buddy was not delivered. I received only the grease gun and 3 wine glasses....now I'm running out of time to install the Bearings before a 3000+ Mile trip...
Great product...have 3 trailers, 2 have no grease fitting on the spindle..the bearing buddy is the way to go to keep bearings greased, and I`ve never had water penetrate these type of caps...
I will replace all of my bearings with this!
I installed these without too much difficulty - the etrailer instruction video for bearing protectors was extremely helpful. I haven't used the trailer much yet but expect these to work well.
I could not be happier,
What a diiference to have not just good brakes, but great brakes. Plus, the install was so easy, all the hardware was a perfect fit, instructions were right on the money (btw, I'm a retired engineer from a nuclear plant and I wrote procedures, so I'm picky) Anyway, towed the boat 1,000 miles and what a reassuring feeling to know that the equipment is in good working order and does the job when called upon.
I'm attaching a couple of pictures so you can see what I did.
Thanks again, I will be using etrailer in the future anytime I need something, feel free to pass on my comments
I recently upgraded my 43 year old small boat trailer with parts from ETRAILER. New hubs, bearings, Bearing Buddy's, wheels and tires. Natalie L spent quite a bit of time on the phone with me to figure out what I needed and when it arrived everything was perfect. This is the first time I have replaced the hubs and wheels in 43 years. Timely service, great prices and I could not be more pleased.
Bearing Buddies been working wonders for decades!
Everyone knows that unless they been living in a cave:)
Installed with ease and seem to be doing what they are intended for well.
Thanks eTrailer!
Buddy bearings make keep grease in the hubs so much easier. No need to take them off to apply grease, just shoot some marine grease into the zerk fittings and put the soft cap back on and your good to go. Easy to install!
When I called etrailer for supplies I spoke with Dana. She was most helpful in securing the correct bearings and races for my small trailer. She helped through the entire process and had my order shipped the same day. I am very satisfied with the order and the speed it was delivered. I am sure you will be happy with any order placed with etrailer, Chuck B.
Very snug fit with the new etrailer blue dot hubs , went on nicely, abit of hitting with a dead blow hammer but nothing to excessive, they do not feel like they will be lost going to the ramp, possibly the galvanized hubs help with the good fit, just got to head out to the ramp to see, feeling confident.
I fitted these to my Northern Tool 4x8 folding trailer, so I don't have to worry about repacking the bearing anymore. They are excellent quality, and I highly recommend them.
First rate service and product knowledge.
Many thanks
William
10/30/2023
Great
I was struggling to find the correct hub kit for my boat trailer because etrailer has a large inventory of products. I decided to call and the salesperson Mellissa found the correct part in minutes and had it shipped to my house in less than 24 hours. It’s is nice to know that etrailer still believes in great customer service and the human element of customer service.
Bearing Buddies, the only way to fly on a boat trailer. No substitutes.
Works great, no issues. Another happy c amper!
Easy and fast as always!! Thank you!
Attached are two photos of Bearing Buddy protectors on my Time Out tent camper.
super customer service! I lost a red eye bearing cover when I hit a boulder in the road. I had recently installed a complete 2 axle disc brake kit with coupler for my boat trailer that I ordered from etrailer. Mike S. found the right size from my original order and shipped out new Bearing Buddies in no time flat! I highly recommend etrailer to everyone I know.
P.s.
8/20/2015
no complaints
Look, there are various bearing buddy knock offs out there that might be "good enough". These are the real deal and they have added a nice little feature - these blue ring indicators. The indicator ring lets you know when you might need to add more grease - and might also keep you from going overboard. I think it is more common for people to try to push too much grease into the hub especially with bearing buddy protectors installed.
Great insurance for a boat trailer especially.
Davmac
4/23/2014
The bearing buddies still look great one year later. As fishing season starts again in mn I look forward to being able to check at a glance to see whether I need to add grease.
I didn’t realize that there were a pair in a package. But the tech is great.
Delivered a month earlier than expected. They were installed on the trailer 10 minutes later. You guys are the best
I installed bearing buddies on a boat trailer that sees both fresh water and salt water. In the past, despite loading the bearings up on grease, it wasn't uncommon to replace them every couple of years. We are at the year one mark with the bearing buddies and no issues. Also, the bearing buddies also show you how much grease is in the wheel hub; our hubs only needed a small amount of grease to top them off the beginning of this season.
Do you have a question about this Trailer Bearings Races Seals Cap?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Megcabra
11/8/2019
All has been great!