Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke
(811 reviews)
Price: $36.64
In Stock
Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke
Item # BV0554-03
Retail:$60.64
Our Price: $36.64
You Save: 40%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (811)
- Q & A (0)
- Videos (2)
- Photos
Ventline RV Vents and Fans - BV0554-03
- Replacement Lid
- Roof Vent
- 14W x 14L Inch
- Tinted
- Ventline
- Plastic
Replacement smoke colored vent cover for Ventline old-style rounded dome trailer roof vents.
Features:
- Replacement cover for 14-1/4" x 14-1/4" roof vents
- Domed cover
- Easy to install and operate
- Smoke color
- Made of a polypropylene plastic
- Fits standard Ventadomes and post-1995 Elixir trailer roof vents
- 2-Year limited warranty
BV0554-03 Ventline Replacement Smoke Dome Assembly for Standard Roof Ventadomes (old-style, rounded dome)
Replaces 61271, 63115
Video of Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Ventline Smoke Plastic Enclosed Trailer Vent Cover Installation
Today on this enclosed trailer, were going to install part number BV0554-03 from Ventline. This is a Ventline rounded dome in a smoke color. To start off well go ahead and remove the trim panel at the very bottom. Next well go ahead and remove the screen and also the crank handle as well. Once we have those parts away, well go ahead and reinstall the handle temporarily and raise the lid up, so we can remove it easily. Now well go ahead and then unscrew the crank assembly from the crossbar and then we can go ahead and release it from the lid.
Well slide the arm down towards an open slot at the bottom and then we can go ahead and release it. We got completely loose from the crank, now well go up top and go ahead and remove it from the vent. Well go ahead and open it up and you can see theres a small tab on the inside edge of the hinge and usually these are twisted to the inside, so we just have to untwist it and then it can slide it off. Now we can go ahead and slide on our new vent cover and then basically reinstall it in reverse order. Well go ahead and put our crank assembly up into place and line up the arm with the vent dome, put it into track and then well go ahead and reinstall the crank arm to the vent.
Then we can reinstall our screen and then our trim ring around the edge. In just a few steps the old one has been removed and our new one has been installed. Thatll finish it for part number BV0554-03 on this inclosed trailer. .
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Did not arrive in time
Customer Reviews
Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke - BV0554-03
Average Customer Rating: 4.9 out of 5 stars (811 Customer Reviews)
Replacement smoke colored vent cover for Ventline old-style rounded dome trailer roof vents.by: Randy K02/04/2017
My experience with etrailer could not have been better. Their online catalog had very good pictures and product description, so I was confident the I was ordering the right item for my application. Pricing was competitive. George J emailed me after I placed the order to let me know he upgraded my shipping so I could get the product sooner. The vent covers came well packaged and undamaged. Now I need to install them on my vintage 1964 Airstream Overlander, which I bought several years ago and rehabilitated. The white plastic vent covers I installed several years ago became brittle and crumbled. I hope the smoke colored ones I bought from etrailer will last a bit longer, but the price was so fair I bought an extra pair for the next time.
by: Debbie 10/08/2022
The roof vents that I purchased was exactly what I needed! The shipping was fast. I installed them myself yesterday and it was pretty simple! I have purchased from etrailer.com before and have been very pleased with my purchases! Thank you!
Debbie
10/9/2023
The vents that I purchased are perfectly fine after a year! Thank you!
Mike L.
11/2/2023
@Debbie Awesome, that's great to hear!
by: Robert 04/22/2024
Just what I ordered and expected. Perfect replacement
by: Paul10/06/2020
Called to get help ordering the vent cover to make sure I ordered the right part. Hally was extremely helpful. Got the part quickly. Hally had shown me where to go to watch an installation video. After watching it, installation was very easy. Pictures show the before and after. Thanks!
by: Mark05/05/2019
Quick simple fix to replace a vent cover lost to the weather. Installation took less than 5 minutes, product fits like the original. William B. made finding and ordering the right part a breeze.
by: Den 10/18/2023
Great quality part that fits great. This cover lets in more light than the original one on my Rockwood trailer which I like. Install was easy after watching the video on Etrailer.
by: Lloyd12/21/2020
I have a 16ft 1972 Brougham travel trailer,and my old vent lid disintegrated.I wasn't sure which vent lid to get.I measured the square hole on the roof and it is 13 inches square. I also needed to be sure of the hinge.The hinge portion on the vent cover is 9 inches.After I removed the screws from the vent lid raising mechanism, and disconnected it from the vent lid rail,I went up top,and opened up one side of the rolled metal hinge.Then the roof vent lid slides off to one side.Then you just slide the new roof vent lid onto the hinge,and bend down the tab to secure it.You then reattach the mechanism inside the trailer.Its actually very easy to do,with just a Phillips and straight slot screwdriver. I attached photos of what remained after my lid was blown off completely which shows the hinge and lifting rail that come with a new roof vent cover attached.I also showed a close up of the hinge and the little tab that is bent in on both sides to keep the lid from sliding sideways. Finally I have pics of the new lid installed.I was happy with this product,and didn't realize you could just replace the vent lid so easily.
by: Wm05/04/2024
fast service looks like OEM replacement, easy install
by: Don10/29/2021
The vent cover is a quality replacement almost identical to the OEM on 2018 Windjammer. The OEM had severe ultraviolet deterioration and had a crack in the top center area and a possible hail damage on an outer edge outside of the seal. Had not leaked inside yet! We will see if this one will last any longer than the OEM’s 3 - 4 years.
Don
10/30/2022
One year later vent is doing it’s job. No failure.
by: Jonathan 07/02/2023
eTrailer is an amazing company to work with. They are extremely helpful when it comes to finding the part you need, and then when the part arrives … their installation videos make the process so easy to complete!
by: Stephen 05/09/2023
I bought a new set of the smoke vent covers to replace the same vent covers purchased 8 years ago. Trailer has been sitting for 4 years and didn't want to have a problem with them on our trip next week, so I purchased these as preventative maintenance since the trailer has been sitting in the sun for all of that time. For some reason the smoke covers have had a considerably longer life compared to the white ones which for me only lasted 2 years. Standard shipping was fast, and the vent covers were well packaged. Will buy from etrailer again!
by: Bruce M.07/12/2014
This is just what I was looking for. It only took a few minutes to assemble and put on my Airstream camper, and it looks so good.
The price was great and very fast shipping. I will bookmark your website and buy from you again when the need arises. Thank you very much.
by: Bruce 01/06/2024
All of my orders over the past few years have been reasonably priced and of good quality. I am totally satisfied with the quick delivery and options for shipping.
by: Mike 01/23/2024
Already installed, so easy to replace. Exact fit.
by: Paul 12/18/2023
Fits perfectly easy to install
by: Ed07/14/2023
Fits a 2016 Forest River Wolf Pup just right and wasn't too difficult to change out. Thanks!
by: Robert V07/26/2013
Replaced two weather beaten, cracked vents. Easy installation just follow the directions. Took about 10 minutes each looks better then the old white ones.
by: michael11/15/2021
Purchased this vent replacement a year ago and it’s working great and holding up to the weather.
by: Tim 06/23/2023
Love dealing with e-trailer always the right parts at a fair price and great customer service over the phone.
by: Kenneth 11/16/2023
perfect fit holding up supper good no issues - good durable quality
by: Jimmie B. 02/03/2014
I will faithfully give your Company my business I just hope it is not too frequent. Long story short the part worked just as it should. I also need to order a new hand crank because the a one is defective.
by: SK09/09/2016
Great product and fits perfectly on my 2007 Keystone Raptor 3612DS Toy Hauler.
Smoke color adds a nice touch and overall looks better.
Superfast shipping much appreciated!
Thanks again
SK
by: Dave L06/03/2017
Took about two minutes to install, should of replaced sooner. Nice price and fast shipping. Looks good.
Dave L.
6/3/2018
It has been working great, summer keeping rain out and winter storage keeping snow out. Great product.
by: Katysdad06/15/2016
Great service, great price, simple to do!!a second grader could do it!
Katysdad99
6/15/2017
Vent has been excellent! Even after cooking in the Florida sun for 2 months of summer and then the north Georgia cold winters with ice and a little snow!
by: Mark11/13/2022
I have an older Car Mate car trailer. The roofvent was very bad. I wasn’t sure about being able to get an exact replacement. Measurements were the same, so I ordered one. It arrived within a few days. I was able to install it in a few minutes. The crank open still works great and no more leaks. I highly recommend this product and also etrailer, as I have purchased other perfect fitting parts from them. ….Mark
25
811
Show More Reviews
See what our Experts say about this Ventline RV Vents and Fans
- How to Determine Which Roof Vent Cover will FitWithout knowing which actual vent was originally installed on your trailer, I am unable to identify an exact replacement for you. However, it is fairly easy to determine a replacement vent cover that will work. To find the correct replacement cover for your vent, if the manufacturers name is listed that will help, check the following features on the current vent and match those up with the replacement vent options; size, hinge type and color. The most common vent opening is about 14-1/4...
view full answer...
- Ventline Vent Cover Replacement - SmokeThe replacement for your ventline AS-13 ANS. Z26.1 DOT 733 roof vent is the # BV0554-03.
view full answer... - Recommended Replacement Lid for a 14" Ventline Roof Vent On a 2022 Forest River It sounds like you're looking for the Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vent # BV0554-03. This is going to be the correct replacement bubbled roof vent cover for your Ventline roof vent.
view full answer... - Replacement Roof Vent CoverWe offer two replacement covers for the Ventline AS-13-M-V101. We have a white cover # BV0554-01 and a smoked color # BV0554-03.
view full answer... - Higher Quality Roof Vent Covers for my Forest River Motorhome With Heng 122112 Roof VentsYes by using the Replacement Lid for Ventline and Elixir RV Roof Vents part # CAM40161 you will be getting away from the polypropylene type of covers that comes standard and upgrade to the poly carbonate type. This would be my choice over aluminum as well simply for the noise factor during storms. I've linked the product page and video for you below. Happy travels!
view full answer... - Replacement Ventline Northern Breeze V2525 Vent CoverFor your Ventline Northern Breeze V2525, we have the: -Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents # BBC0530-01 for white. -Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents # BV0554-03 for smoke. Or -Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents # BBC-0530-04 for blue/grey.
view full answer... - Replacement Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof VentsThe best way to go about this is to determine what you currently have on your 2011 Forest River Sunseeker Motorhome. Is the manufacturer listed on the current vent? The most common size used by OEM's in recent years is the 14-1/4" by 14-1/4" but please verify this on your specific model. If there is a rolled metal hinge attached to the vent cover like on the Ventline Replacement Smoke Dome Assembly, # BV0554-03 then I would select this.
view full answer... - Replacement Roof Vent Cover for 1991 Fleetwood Bounder Motor HomeWe offer both a range of replacement vent covers as well as complete trailer vent assemblies. I have provided a link to our main page for replacement lids where you can use the filters in the left-hand margin to select the characteristics for your vent. The main thing to consider is the hinge type, either 3-point, 4-point or continuous type hinge. In the event that you cannot find the replacement lid you need you can use the other link provided to view all complete vent assemblies....
view full answer... - Replacement Roof Vent Lid for Trailer with Missing LidSince the style of roof vent you have does not have a lid replacement available your best option is a new vent assembly with the part # V2092SP-28. For an install kit you'd then want the part # 344270KITW which comes with sealant and mounting screws.
view full answer... - Which Plastic Roof Vent Lid Would Fit Ventline Ventadome Trailer Roof Vent # V2110SP-24For a plastic roof vent lid replacement for the Ventline roof vent part # V2110SP-24 you'd want the part # BV0554-03 for a smoked lens or # BV0554-01 for white.
view full answer... - Replacement Vent Cover for 1998 Winnebago Minnie Winnie RV with Continuous HingeI do have replacement covers available if your roof vent has a continuous hinge. If you are looking for a smoke vent cover then you can use part # BV0554-03 or part # BV0554-01 for a white vent cover. The dimensions you provided are an industry standard size which is classified as 14-1/4" x 14-1/4" so there is no need to get hung up on the 1/4" difference for the inside dimension as these measurements could vary depending on where they are taken from. The covers both measures 15" x 15"...
view full answer... - How to Pick Out Replacement Vent Cover Lid for 2013 Haulmark TrailerI wish there was a database that had all of the replacement parts for older trailers like yours, but the only way I can recommend a replacement cover for you trailer would be to have you check out and measure yours first so you can compare it to what we have. The best way to find the correct replacement vent cover for your cargo trailer is to measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name...
view full answer...
- Replacement Cover for Roof Vent on a 2017 Forest River Wolf PupThe most common replacement lid for modern roof vents is going to be the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents part # BV0554-01 for white or part # BV0554-03 for black. This is most likely what you need for your 2017 Forest River Wolf Pup but the only way to be certain is to check the hinge type and make sure it matches the attached photo. If it does which it should then this is what you need. The roof vent lids are almost all 14-1/2" - 14-1/2" so this should...
view full answer...
- How to Pick Out Replacement Roof Vent Cover for TrailerMost likely we have what you are looking for but you will need to first determine what vent you have on your trailer. The best way to find the correct replacement vent cover for your cargo trailer is to measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name is on the vent that will help. Finally, you will need to look closely at the hinged portion of the vent. If there is a rolled metal hinge attached...
view full answer...
- How to Pick Out Replacement Roof Vent Cover for a Covered TrailerI wish there was a database that had all of the replacement parts for older trailers like yours, but the only way I can recommend a replacement cover for you trailer would be to have you check out and measure yours first so you can compare it to what we have. The best way to find the correct replacement vent cover for your cargo trailer is to measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name...
view full answer...
- Replacing Vent Cover for Ventline Old Style Rounded Dome Trailer Roof VentsIf replacing roof vent cover # BV0554-03 for old style rounded dome trailer roof vents that have 1 long continuous metal hinge then all you need is the new cover. I have included a link to a video that shows how to replace this style of vent cover. If your hinge style is different take a look at the picture I have included that shows different hinge styles. Once you identify what you have it should be easy to find a replacement cover.
view full answer...
- Replacement Vent Cover For a Ventline AS-13 MV101 VentFor your Ventline AS-13 MV101 vent, you can use the # BV0554-01 (white) or # BV0554-03 (smoke) for a replacement vent cover.
view full answer... - Travel Trailer Vent Cover for 2017 Forest River Rockwood Mini Lite 2304KSTo truly confirm a replacement vent cover fit, it's best to measure the vent opening or the old vent and compare the hinge style. It sounds like that might be a challenge currently but the Ventline Vent Cover, # BV0554-03, fits 14-1/4 inch x 14-1/4 inch roof vents that is a very common size and the continuous rounded metal hinge is also the most common hinge design we see used so this will most likely work just fine for your 2017 Forest River Rockwood Mini Lite 2304KS. I have attached a...
view full answer... - How to Pick Out Replacement Vent Lid for Trailer Roof VentIn order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on...
view full answer...
- How to Select a Replacement Vent Cover for a 6x12 Pace Journey Enclosed Cargo TrailerIn order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on...
view full answer... - Replacement Vent Cover with Right Hand LiftI have a solution for you but the model you have is no longer available. We have seen the side lift in the past in older style vents but newer ones seem to have them in the middle. You can replace the entire assembly with the Replacement Roof Vent for MaxxFan Plus Roof Vent w/ 12V Fan part # MA99FR. The Roof Vent Installation Kit part # 344270KITW has everything you will need to complete the installation.
view full answer... - Replacement Vent Lid for Dutchmen Aerolite Travel TrailerI have attached options for the more commonly seen vent lids used on manual opening roof vents. This is rounded dome style by VentLine in white # BV0554-01, or in smoke # BV0554-03. If you have not previously replaced a vent cover/lid I have attached a couple of useful how-to video. In addition I suggest consider installing an enclosed trailer roof cover such as the # CAM40431. These vent covers lets you keep your RV roof vent open at all times, letting in light and air while keeping...
view full answer... - Replacement Roof Vent Cover for a 2014 Keystone Hideout LHSThe replacement roof vent covers are all pretty much the same size, 14-1/4" x 14-1/4" which makes things a bit easier but they do not all use the same hinge. Therefore, in order to determine the correct replacement roof vent cover for your 2014 Keystone Hideout LHS you will need to open the cover from the top of the trailer and take a look at the hinge and how it attaches. It should match one of the four types I have attached for you in the photo. Please let me know which one that is and...
view full answer...
- Replacement Roof Vent Cover for 2006 Flagstaff 831FKSS Travel TrailerThe quickest way to find the correct replacement vent cover for your Flagstaff is to first measure the vent itself, not the cover. Most vents are 14-1/4 by 14-1/4, 14 x 14 or 13 x 14 inches wide. Look for the manufacturer name on the vent, as that will help match a suitable repalcement. Finally, you will need to look closely at the hinged portion of the vent. If there is a rolled metal hinge attached to the vent cover like on the Ventline Replacement Smoke Dome Assembly, # BV0554-03, that...
view full answer...
Do you have a question about this RV Vents and Fan?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Isabelle B
Updated by:
Manda E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Randy K.
2/4/2018
So far so good!