bing tracking image
  1. Trailer Bearings Races Seals Caps
  2. TruRyde
  3. Seals
  4. Grease Seals - Double Lip
  5. 1.983 Inch O.D.
  6. 1.249 Inch I.D.
Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1

Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1

Item # 34823
Retail:$7.49
Our Price: $3.99
You Save: 47%
Trailer Bearings Races Seals Caps
Shipping Weight: 0.04 lbs
Add to cart
In Stock
Trailer Bearings Races Seals Caps 34823 - 1.249 Inch I.D. - TruRyde
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Great Prices for the best trailer bearings races seals caps from TruRyde. Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1 part number 34823 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (404)
  • Q & A (0)
  • Photos

TruRyde Trailer Bearings Races Seals Caps - 34823

  • Seals
  • Grease Seals - Double Lip
  • 1.983 Inch O.D.
  • 1.249 Inch I.D.
  • TruRyde


Features:

  • Using a double lip seal is an upgrade from a single lip seal
    • Reinforcing spring behind the lip does a better job of retaining grease inside the hub and keeping out water and road grime
  • Includes 1 double lip grease seal



I.D. O.D.Thickness Use With:
1.249 1.983.25 BT8 Spindles


Seal Cross-Reference
Dexter #
Transcom #
National #
NOK #
Chicago Rawhide #
-
12192TB
470706
AD1836FO
12407



GS-1250DL TruRyde Double Lip Grease Seal





Customer Satisfaction Score:


Customer Reviews

Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1 - 34823

Average Customer Rating:  4.8 out of 5 stars   (404 Customer Reviews)


by:

The item's are what I needed to get my boat trailer wheel bearings repacked. Through no fault of etrailer, Usps sent my package all over the Midwest before arriving in a timely manner. I was able to purchase some at a local retail shop. I will have these for next time they need repacking.



by:

Great service from etrailer helping me get the correct seal for my old trailer.



by:

Last week I started thinking about my kayak trailer and what repairs needed to be completed before the spring and summer usage.

In 2011 I converted a small sailboat trailer to a two place kayak trailer. I ordered bearing kits wheels and tires at that time from e trailer. Every year I pull the wheels and grease the bearings and I install new grease seals. Last year when I was doing my maintenance I found that the bearing races were lightly rusted and pitted because the trailer was buried under a large snowfall. The bearings were fine and I cleaned up the races with steel wool. I decided I would replace everything come winter. I ordered bearing caps to replace my old dented caps hoping that this will keep the bearings dryer. I made a place in the garage to keep the trailer from the weather.

I placed a call to you guys and was greeted by a very friendly voice on the other end of the phone. Brandon was able to find my past order saving me time and effort. (My filing system could be better.) He was able to e-mail me copies of my previous orders and shortly there after I placed my order on line for new bearing kits and a few extra seals and well you know the rest. I tell everyone about the excellent service I get from etrailer.com.

keep up the good work.

Bruce

2/26/2018

Its very nice that you would follow up. The products I purchased performed perfectly. I am only able to purchase the double lip seals through you. I cannot find them localy. Thank you for selling a superior product.



by:

Prompt delivery. My 1966 Alloy tandem boat trailer used National seals like these with spring tension around the axle lip. I've been looking for replacements for over 40 years! Most seals are designed to keep grease in, but these are better at keeping water out. Love them.



by:

Grease seals as described



by:

Very low price, but look like they will perform fine. I was having trouble finding this seal local. Your web site had the dimensional information I needed when I did not have a part number. "This Old Trailer" has a ways to go and it looks like you have the replacement lights I will need.

Kenneth F.

7/16/2018

Trailer repair complete but has not been used.



by:

These are good and cheap. Work well for a year and then I replace them. Not sure I would keep them on longer than that bc of water intrusion.



by:

Service a trailer is always excellent



by:

Josh helped me with my order at 5:00pm Friday afternoon. Part arrived 3 days later. Installation and testing complete. I'm all set now.

Thanks Josh!

Skip

8/25/2023

All good. No grease leaks from the wheel hub. Fit seems to be perfect.



by:

Best customer service anywhere hands do wn!



by:

Looks like the right seals



by:

these seals worked great. I used them during a rebuild of a trailer used to haul a sailboat. The seals installed perfectly and have held up good during this past year.



by:

etrailer web site worked great for finding the correct idler hubs for my 1997 snowmobile trailer. The hubs had an unusual seal size so I had to mix and match a little to get the correct sizes. Everything went together as expected and it is now ready for the road again.



by:

Great service AGAIN>



by:

As advertised. Smooth transaction. Well packaged. Thanks!



by:

Received my parts on time, good price, good quality and excellent customer service.



by:

Just repacked bearings with new seals on my 4' x 8' folding utility trailer. Customer service was great in helping me with selecting the right parts including cotter pins. All is good now. I have been ordering from etrailer for 10 + years. Great place with great people!

Skip P.

8/2/2021

Great, NO leaks



by:

Double lip seal was used on my Jet Ski Trailer hubs. I feel confident they will keep the grease in and the water and dirt out. Easy to install and a perfect fit.



by:

I ordered 2 hubs with bearing and seal kit. Box came in damaged and a seal was damaged pretty bad. It had no wadding in box at all. I called back and the lady told me that they didn’t have any of those seals in stock and that it would be 2-3 weeks to get one to me.she was nice about it. I asked if they could open a package like the one they sent me and send me the seal out of it because I can’t wait that long and when the seal comes in, replace it in the package they removed it from. She replied they don’t usually do that. She did tell me if I found one locally, she would credit me the money for the seal (It wasn’t worth the hassle for a 2 dollar seal). This was not a special seal. Just a 2000 pound utility trailer. I would think someone who specializes in trailer parts would keep at least 4 of these in stock. Hubs, bearings, was great! Packing was bad, service was not the greatest.



by:

Hub and all parts were there as described on the add accept the seal had been damaged in shipping. Upon delivery etrailer Was already asking me if the order was ok . So then I returned email to them with a photo of the damaged seal and they promptly popped one out to me in the post and in just a couple of days the hub was together and ready for use . Great customer service and products.



by:

Everything fit and works well



by:

I bought these for my Harbor Freight pull behind trailer for my motorcycle. They arrived fast and are far superior to the OEM seals that the trailer used.



by:

The seal fit perfectly.



by:

The seals are good quality and do the job we need them to do.



by:

Incredibly fast! I am very happy with you guys. I tried an order from another company and the experience was not as good. I have ordered trailer parts for 10 plus years from you and never had an issue at all. My business will stay with you. When I want to go fishing i need to find parts fast and see them delivered promptly. Thank you for the best service I can find.

William

1/22/2023

Great as usual!


25
404
Show More Reviews

See what our Experts say about this TruRyde Trailer Bearings Races Seals Caps

  • Bearing Kit Recommendations for 1989 Load Rite Boat Trailer with Seal 12194TC and Bearing L44649
    I did some research and found that the 12194TC seal you said you have measures 1.250 inside diameter, and 1.979 outside diameter. The seal I recommend is part # 34823. The dimensions listed for this seal are 1.249 inside diameter and 1.983 outside diameter. We don't have a bearing kit with everything you need so your best bet is to go with the bearing numbers # L44649, the seal # 34823, the races part # L44610 for each bearing (if needed) and then for a spindle washer it sounds like you...
    view full answer...
  • Replacement for P1049 Grease Seal on Boat Trailer Hub
    The 1.250, 1.979, and 0.250 on your seal are the dimensions. Based on my research, this seal is interchangeable with the Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1 # 34823. This would be the replacement seal I recommend. We also have a pair of seals, # RG06-010.
    view full answer...
  • Bearings and Seal Replacement for Trailer with Dexter 2,000 lb Axle
    Since we know you have a Dexter 2,000 lb trailer axle the correct bearing kit is the part # BK1-100 which comes with the correct bearings you are in need of # L44643 and also the seal you need # 34823.
    view full answer...
  • How to Choose Correct Replacement Hub for 2014 K-Z Sportsmen Classic 13FK Camper
    Most smaller campers like what you have use an axle rated for 2,000 lbs. If this is the case with your camper then you should be able to use the Idler Hub Assembly # AKIHUB-545-2-EZ-1K but you will need to confirm what bearings you have and the size of the grease seal that will fit with your spindle as we don't have any info on that. This idler hub uses # L44643 inner bearings and then a grease seal # 34823 that has an inner diameter of 1.249". If you have something different then go ahead...
    view full answer...
  • Does the # 34823 Seal in Bearing Kit # DL21792 Match a # 7781 S
    The information that I was able to find on the oil seal # 7781S shows that it has an outer diameter of 1.989 inches and works with oil bath or grease-able hubs. The Bearing Kit with Grease Cap, # DL21792, includes Grease Seal, # 34823, which only works with grease-able hubs. I pulled the seal from our warehouse and it's outer diameter measures 1.983 inches. The # 34823 and the # 7781 S aren't an exact match, but the outer diameter measurements are very close. If you have grease-able...
    view full answer...
  • Should It Take a 14oz Cartridge To Fill Trailer Hub
    I honestly don't see how it's physically possible to pump a whole 14oz tube of grease into a single hub, especially when your trailer is only a year or two old. Grease seals are notorious for blowing out the back of the hub which is why the EZ Lube spindle setup is nice but dangerous. I definitely recommend pulling your hub to check on the seals. If the seals blew (most likely) you're going to have grease on your brakes which will be rendered useless until you get it all cleared off and...
    view full answer...
  • Replacing A 125255UC Double Lip Grease Seal
    The 125255UC seal has a 1.249" ID and a 1.983" OD and for that our part # 34823 will be the correct replacement.
    view full answer...
  • How to Determine Correct Grease Seals for Trailer
    I can help you out with figuring how to determine what seals you need for your trailer, though it will require some measuring as we don't have any way of knowing exactly what seals are going to work on your 1997 Bearcat trailer. It's pretty easy though, as you just need to use digital caliper and measure your spindle to the thousandths of an inch where the seal rides; you can use the photo I've attached to see exactly where you need to measure. For example, if you measured your spindle...
    view full answer...
    Image 1 for
  • Bearing Kit Recommendation Using L44649 Inner And Outer Bearings
    We do offer bearing kits that have part # L44649 for the inner and outer bearings, but the seal included in the kit does not match the 12194TC seal you said you have. We do have replacement seals that may work just fine for you. I did some research and found that the 12194TC seal you said you have measures 1.250 inside diameter, and 1.979 outside diameter. The seal I recommend is part # 34823. The dimensions listed for this seal are 1.249 inside diameter and 1.983 outside diameter. The...
    view full answer...
  • How to Choose Correct Replacement Grease Seals for Trailer Hub
    Some generic grease seal parts are listed below for various axle capacitates, but the best route is to find the part number on your existing grease seals. If you have a hard time with that then the next best thing is to use a digital caliper to measure the inner and outer diameters of your grease seals and then choose a replacement from the linked selection that matches what you found. 2K Axle - # 34823 (Qty 1) 3.5K Axle - # RG06-050 (Qty 2) 5.2K Axle - # RG06-070 (Qty 2) for 2.250" OD...
    view full answer...
  • Trailer Grease Seal Recommendation for Replacement of Victor 47376
    According to my research Victor 47376 grease seal has an inner diameter of 1.218 inches and an outer diameter of 1.983-inches. The seal we offer nearest to those dimensions is part # 34823 as a single seal or part # RG06-010. These have matching outer diameters but slightly larger inner diameters at 1.249-inches. These are the closest to your Victor seal.
    view full answer...
    Image 1 for
  • Replacement Trailer Hub Seal for 12194TC TCM
    We've got one that is close enough I am more than confident it will fit. It is the Double Lip Grease Seal item # 34823 you were looking at. It has a 1.249" inside diameter and 1.983" outside diameter. The few thousandths of an inch this is off of your 12194TC TCM oil won't affect it functioning correctly.
    view full answer...
  • Choosing a Replacement Grease Seal for a 2,900 lb Trailer Axle
    Thank you for the information and the photo! For your application I recommend checking out this double lip grease seal # 34823 which is standard for 1" BT8 spindles, and the seal has a 1.249" ID and 1.983" OD. Your 2,900 lb weight capacity is definitely unique so I can't say for sure whether this will match or not, but you can measure your spindle where the grease seal rides as well as the opening of your hub where the seal fits to see if these dimensions match. If these specs don't...
    view full answer...
    Image 1 for
  • Replacement Bearings for 2013 Adjustable EZ Loader 23 Foot Boat Trailer
    I reached out to EZ Loader and although they were unable to completely identify your trailer, even with the VIN, I was able to narrow down what you need to 2 possibilities. In order to figure out which of these is right for you, you're going to need to check out your spindle. If you have a straight spindle, the correct inner and outer bearing is the # L44649 which uses race # L44610. The grease seal is the 12194TC but you can use the # 34823 instead. If you have a tapered spindle, you...
    view full answer...
  • Replacement Seal for 1-1/4 Inch Inner Diameter Measurement
    The double lip will provide a better seal, so I'd give it a shot. You will want the Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1 # 34823 for the measurement you gave.
    view full answer...
    Image 1 for
  • How to Measure to Find a Replacement Grease Seal to Replace Victor 47376
    According to my research Victor 47376 grease seal has an inner diameter of 1.218 inches and an outer diameter of 1.983-inches. The seal we offer nearest to those dimensions is part # 34823 as a single seal or part # RG06-010. These have matching outer diameters but slightly larger inner diameters at 1.249-inches. These are the closest to your Victor seal.
    view full answer...
    Image 1 for
  • Recommended Grease Seal w/ a 1.25 ID and a 1.98 OD
    Yes, you would! The grease seal you would need is the Double Lip Grease Seal - ID 1.249" / OD 1.983" item # 34823.
    view full answer...
  • How to Pick Out Replacement Trailer Hub Seal
    The seal number you gave me does not cross reference with any of the seals we offer. You will need to measure the diameter of your spindle where the seal rides and the inner diameter of where the seal installs in your hub to pick out the correct replacement.
    view full answer...
    Image 1 for
  • Recommendation For Bearing Kit For Malone Microsport Trailer
    Based on the information you sent, it sounds like you have an inner and outer bearing like Item # L44643. I called the manufacturer and they told me that the hub bore is 1.98 inches which matches a double lip grease seaI like Item # 34823. If these match your trailer's parts then I recommend Bearing Kit Item # BK1-100 which contains everything that you will need. Before taking further action, I want to encourage you to double check the bearing sizes so that you get the correct bearings...
    view full answer...
  • Possible Grease Seal Recommendation for Seal with 31 mm ID and 52 mm OD
    I converted your mm seal dimensions to inch and found that your seal measures 1.22 inches inner diameter and 2.04 for outer diameter. The closest seal we have to that is the part # 34823 which has an inner diameter of 1.249 inches and an outer diameter of 1.983 inches. I would recommend you measure your seal again with a digital caliper on the inch setting to see if this is a match. For a caliper you would need the part # PTW80157.
    view full answer...
  • Does Grease Seal # 34823 Feature a Garter Spring
    There is indeed a garter spring in the # 34823 Double-Lip Grease Seal. If you view the product description video, you can briefly see the spring. I'd captured a frame from the video where you can see the spring a bit better.
    view full answer...
    Image 1 for
  • Replacement Bearing, Races, and Seals for a Trailer with L44649 Inner and Outer Bearings
    I can make it very easy for you. Since you have L44649 inner and outer bearings, you can use bearing kit # BK1-150. You will get both bearings, a double lip seal, a washer and cotter pin. The seal in this kit is a 10-60 double lips seal like # RG06-020. It has an inner diameter of 1.500 inches and an outer diameter of 1,987 inches. For L44649 bearings, the matching race is # L44610.
    view full answer...
  • Replacement Grease Seal For Boat Trailer With Chicago Rawhide 11881 CR Seal.
    The Double Lip Grease Seal # 34823 is the closest seal that I can find to your measurements. It has an outside diameter of 1.983", inside diameter of 1.249 and is 1/4" thick. I would verify that the seal will fit correctly on your hub with a Digital Caliper # PTW80157 prior to installation.
    view full answer...
  • Correct Bearing Buddy for the Trailer Idler Hub Assembly Part # AKIHUB-440-2-2K
    Yes, the correct Bearing Buddy Bearing Protectors for the Trailer Idler Hub Assembly part # AKIHUB-440-2-2K is part # BB1980A-SS for stainless steel or part # BB1980A for chrome plated.
    view full answer...


< Previous
123. . .7



Do you have a question about this Trailer Bearings Races Seals Cap?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jeff D
Installed by:
Jeff D
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.