Replacement Hubs for 1999 Load Rite 161250L Boat Trailer
Question:
I am looking to replace both hubs on a 1999 Load Rite 161250L boat trailer. Load Rite says they believe it has 1.06 in straight spindles. The current hubs have Bearing Buddies installed on them. I am looking for complete galvanized hub assemblies which either include a lubrication nipple or to which a Bearing Buddy type device can be added. Bolt pattern is 5 X 4.5. Tires are 480-12, so I assume that is 12 in wheels. I am not exactly sure where to measure from.
asked by: Mark L
Helpful Expert Reply:
If the surface of your spindles where the inner and outer bearings ride are 1.06 inches in diameter, you'll need hubs compatible with a L44649 inner and outer wheel bearing.
The # AKIHUB-545-2-G-2K hub you'd looked at should be compatible with your spindles, you'll want to use a digital caliper like # PTW80157 and measure the spindle diameter where the grease seal rides which is known as the seal journal surface. If the seal journal surface is 1.50 inches in diameter, the 10-9 grease seal included with the # AKIHUB-545-2-G-2K hub will be compatible with your spindle. The hubs include the inner and outer bearings and races, the grease seal and the lug nuts, as well as a grease cap.
The hubs are compatible with 12 inch wheels like those used by your 4.80-12 tires.
I've linked to some product videos that you might find helpful.
If your current bearing buddies are in good shape, you'll be able to reuse them. If you'd like to replace them, use part # BB1980A-SS.
Products Referenced in This Question
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: How to Measure a Trailer Axle
- Article: Trailer Tire Sizing
- Q&A: Troubleshooting Factory Trailer Wiring that has No Power
- Q&A: Replacement Hubs for 1997 FLOE Pro 100 Plus Snowmobile Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Spare Tire Recommendation for a Dual Jet Ski Trailer with 205 x 65 x 10 Load Range E Tires
- Q&A: Recommended Grease Seal w/ a 1.25 ID and a 1.98 OD
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement