Determining Replacement Hub for Boat Trailer with H-1062-1 Printed on Back of Hub
Question:
Need a hub for my 2006 boat trailer. Hub had model number and name on back H-1062-1 UNIQUE UNCTIONAL PRODUCTS
asked by: Curt
Expert Reply:
That number doesn't give me a cross-reference. To get a replacement you will need to pull the bearings out of the hub and on the face of both the inner and outer bearing there will be a number printed on the bearing face. If you can give me those numbers I likely can help you out with the correct replacement. I also will need to know the bolt pattern of your hub if you want to keep the same wheels.
If you can't determine the bearing numbers, then you can use a digital caliper like # PTW80157 on your spindle in the bearing and seal locations and I can help from those dimensions at least 2 places to the right of the decimal.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Grease Seal
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Q&A: Replacement Hub, Bearing, and Grease Seal Kit for a UFP H-1062-3 Axle
- Search Results: grease seal
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-259-5UC1-EZ Review
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Search Results: l44610
- Search Results: 13194
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Shop: Dexter Trailer Idler Hub for 2,000-lb and 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Q&A: How to Determine the Right Air Pressure to Fill a Trailer Tire
- Search Results: washer
- Search Results: d ring washer
- Search Results: boat trailer wheel hub kit
- Search Results: l44649
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: Galvanized 2,000 lb Axle Trailer Hubs with 5 on 4-1/2 inch Bolt Pattern
- Video: Redline Dust Cap Driver Tool Review
- Video: Trailer Hub Inspection Demonstration
- Q&A: Replacement Hubs for Axle Spindle with 1.06 Inch Diameter
- Q&A: Correct Replacement Hub For Jet Ski Trailer With BT150 Hub
- Q&A: How to Tell if a Trailer Spindle is Damaged or Needs to be Replaced
- Shop: Trailer Hitch
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 84545BX Review
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Video: etrailer Trailer Idler Hub Assembly Installation
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
Geo
5/10/2024
The bearing number is L44649