Master Lock Hitch Receiver and Coupler Latch Lock Set Review Video

There are three pins on the Pro Series Adjustable 3-Ball Mount part #63070; one to rotate the tri-ball assembly (spindle pin), one to remove the tri-ball assembly (shank pin), and one to hold the shank inside of the receiver tube (hitch pin). In…

Thank you Dean. While we currently only offer the Diversi-Tech Combination Lock Set #DT35010KA5504 as the set and do not have a keyed alike 2nd coupler latch we do offer our etrailer Hitch Receiver and Coupler Lock Set #e99039 which you can have…

I took a look at the online version of the owner's manual for your 2018 Honda CR-V. Under the "Towing a Trailer" section it lists a maximum trailer weight of 1,500 pounds. This is the heaviest trailer your CR-V can safely pull. In order…

By all accounts the Curt Spectrum Trailer Brake Controller #C51170 works well and is easy to use and install on most vehicles. It is a brand new item so not a lot of feedback has come in on it. I did learn a few things though after speaking with our…

The Yakima Replacement Hitch Bolt and Clip for Yakima HoldUp Hitch Mounted Bike Carrier, part #Y8890200, is a 5/8 inch bolt. The size wrench you would use to install or remove this bolt is 15/16 inch.

The Curt Tow Strap Loop for 2" Hitches part #C45832 will work great with with the InfiniteRule Hitch Lock for 2" Hitches part #34061071-D which has more than enough shear rating at 42,000 lbs. That said, trailer hitch pin manufacturers…

I would discourage the use of an adapter for use of 2 inch accessories in 1-1/4 inch trailer hitch receivers. The reason is that the adapter places the carrier farther away from the rear of the vehicle and hitch, creating additional torque that 1-1/4…

You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…

No, unfortunately a specific key number cannot be ordered for the Master Lock Hitch Receiver and Coupler Latch Lock Set - Padlock - 1-1/4" and 2" Hitches #2848DAT.

For your trailer tongue lock part #379DAT the correct part number for a replacement key is the part #MLK1. But you will need to know what key number you need. If you do not know what key number is needed there is no way to know.

Unfortunately, the Roadmaster #RM-316 aren't available keyed alike in multiples greater than the included 2. This being said, I might have an option that would allow you to get as many similar locks as you'd like that would be keyed alike.…

Yes the lug nuts #LHLR103 that you referenced are a fit on the Malone MicroSport trailers.