Ball Mount Basics: Pintle Hitches

Learn more about the following ball mount topics:

What is a Pintle Hitch?
Pintle Hitches vs. Ball Hitches: Which is Better?
How Does a Pintle Hitch Work?
What Does a Pintle Hitch Mount Onto?
How do I Convert from a Pintle Hitch to a Ball Coupler?

What is a Pintle Hitch?

A pintle hitch is primarily used for heavy-duty towing, particularly on rough, off-road terrain.

At the most basic level, a pintle provides a pivot point around which another object turns. Pintles have a variety of mechanical uses, such as in boat rudders and door hinges. In the case of towing, a stationary pintle hook provides the point around which a lunette ring is able to pivot, thus allowing for a greater range of motion compared to a traditional ball coupler.

Pintle Hitches vs. Ball Hitches: Which is Better?

Pintle hitches have a clear advantage over traditional ball hitches, also called ball mounts, when it comes to towing capacity. Traditional Class V trailer hitch receivers have tongue weight (TW) capacities up to 4,000 lbs and gross trailer weight (GTW) capacities up to 25,000 lbs. On the other hand, many pintle hitches have more than double this weight capacity. The Curt pintle hook, for instance, has a 12,000-lb TW capacity and a 60,000-lb GTW capacity. Because of their superior weight capacity, pintle hitches are commonly used for industrial, military, or agricultural applications.

Pintle hitches also allow for more movement at the attachment point than ball couplers do. Whereas ball couplers fit snugly over the hitch balls they attach to and lock into place, pintle hooks leave additional room where they attach to lunette rings, thus allowing for some degree of movement. This range of motion—both vertical and horizontal—makes the pintle hitch ideal for use on uneven, off-road terrain, where you may encounter more dramatic angles than you would on a paved road or highway.

With all the benefits of the pintle hitch, however, there are some tradeoffs that come with the gain in weight capacity and movement. Firstly, the greater range of motion also translates to a rougher, noisier ride, since the trailer is able to move around more than it can with a ball coupler. Also, weight distribution systems cannot be used with pintle hitches.

The chart below offers a breakdown of the advantages of these two popular hitch types.

Pintle Hitches vs Ball Mounts

GTW 10,000 lbs - 60,000 lbs

Bolts to pintle mount

Requires lunette ring

Rougher, noisier ride

Ideal for off-road applications

Fits 2", 2 1/2", and 3" hitch receivers

Uses pintle hook or hook/ball combination

GTW 2,000 lbs - 25,000 lbs

Mounts to trailer hitch receiver

Requires ball coupler

Smoother, quieter ride

Less equipped for off-road applications

Fits 1 1/4", 2", 2 1/2", and 3" hitch receivers

Uses hitch ball

How Does a Pintle Hitch Work?

Pintle hitches work using two main components: a pintle hook and a lunette ring. The pintle hook attaches to the tow vehicle, and the lunette ring is bolted to the trailer being towed. The pintle hook jaws lock around the lunette ring and are then secured with a safety pin (included). To remove a pintle hitch, simply remove the safety pin and open the hook to release the lunette ring. Both your pintle hook and lunette ring should have a sufficient GTW rating to support the loaded weight of your trailer.

A pintle hook and lunette ring

A pintle hook and lunette ring in use

What Does a Pintle Hook Mount Onto?

Pintle hooks can either be bolted directly to a reinforced utility truck bumper or attached to a trailer hitch using a mounting plate.

You can purchase a pintle hook without a shank and buy a mounting plate separately, or you can purchase a pre-mounted pintle hook. Purchasing a separate mounting plate is a good option if you need a certain level of rise or drop to accommodate a height difference between your tow vehicle and trailer. Mounting plates provide multiple locations for attaching your pintle hook so that you can easily match your trailer height. Mounting plates can be used in either the rise or drop position. Bolts and other hardware are typically included with the hook.

The 8 holes in this mounting plate offer 3 locations for attaching your pintle hook

Whether you purchase a mounting plate separately or select a pintle hook with a shank, both will slide inside your 2" or 2½" hitch receiver just like a traditional ball mount (a 3" mounting plate is also available). Note that the weight capacity of your towing setup is always limited by the lowest rated component. Even if your pintle hook has a 30,000-lb capacity, you will be limited if your hitch can only support a 20,000-lb trailer, or if your mounting plate has a weight capacity of 25,000 lbs. When mounted to a surface such as a reinforced bumper with an equivalent or greater weight rating, pintle hooks do not require a mounting plate and can be used at their full capacity.

How Do I Convert from a Pintle Hitch to a Ball Coupler?

If you regularly tow multiple trailers with both lunette rings and standard ball couplers, you should consider a dual-purpose Pintle Hook and Ball Combination Mount. This specialty mount allows for the easy conversion between a pintle hitch and a traditional ball coupler. If you need to tow a trailer with a lunette ring, simply secure the hook around the lunette ring. If you need to tow a trailer with a traditional ball coupler, open the hook and attach your coupler to the hitch ball instead. Some combination mounts, such as the Convert-A-Ball option, come with three easily interchangeable balls to match ball couplers of differing sizes.

How do I determine which ball size I need?

Your hitch ball diameter will depend on the diameter of your coupler. Like trailer hitch balls, pintle hitch balls are offered in 17/8", 2", and 25/16" diameters. However, pintle hitch balls typically have a wider shank than trailer balls do. The most common shank size for a trailer ball is 1", while the most common size for a pintle ball shank is 1¼". You can switch out your pintle ball for a different diameter ball, (for instance, a 2" ball for a 2 5/16" ball), but you should make sure your shank remains the same size. Note that you will have a lower weight capacity when towing with a pintle ball than when towing with a hook and lunette ring.

Related Products:

Shop Pins and Clips

Shop Pintle Hitch Balls

Shop Lunette Rings

How to Measure for Trailer Hitch Drop

Written By: Amber S

Updated by: Jacob J

Updated on: 11/1/2023

Merle

2/10/2024

Convert A Ball hitch is the cats meow if you have a variety of trailers spanning pintle to different size balls.

Chris

2/9/2024

Good article. I built an offroad trailer (using many parts from etrailer :) ) and to keep the clunky pintle noise to a minimum I used the smallest pintle on the truck and a larger Lunette on the trailer side. There is plenty of freedom of movement and is totally silent on the road. Clunks when offroad but not too bad.

Mike L.

2/9/2024

@Chris The noise you describe is pretty unavoidable with pintle/lunette setup due to the loose nature of the way they fit together. We're glad to hear it's quiet when it's on pavement, though!

Explore Expert Info

on Trailer Hitch Ball Mount

Videos

for Trailer Hitch Ball Mount

Help Articles

for Trailer Hitch Ball Mount

Expert Answers

for Trailer Hitch Ball Mount

Review of CURT Pintle Hitch - Pintle Hook Mounting Plate - C48349

Review of Progressive Dynamics Replacement Section AC/DC Power Distribution Panel - PD4655V

Yakima JetStream Crossbars Roof Rack Kit Review - 2023 Volkswagen Tiguan

K-Source Snap & Zap Custom Towing Mirrors Installation - 2023 Ford F-150

Front Runner Slimline II Platform Rack Review

Review of OptiMate RV Solar Panels - 10 Watt Roof Mounted Solar Kit - MA49JR

Review of Progressive Dynamics Converter Status Remote Pendant Inteli-Power - PD92201

Review of CURT Pintle Hitch - Pintle Mounting Plate - C96BR

etrailer Class III Trailer Hitch Installation - 2023 Honda Passport

Review of etrailer Camper Jacks - 4 Scissor Stabilizer Jacks 10K - TJSCHD-24-4

Review of UWS Trailer Tool Box - Chest Tool Box - UWS01059

etrailer Trailer Jack - Side Frame Mount Jack - TJDP-7000S-B Review

How to Measure for Trailer Hitch Drop

How to Choose the Right Trailer Hitch Class

The Differences Between Cam Buckles and Ratchet Straps (And Who Would Win In a Fight)

Steel vs. Aluminum Ball Mounts

Anti-Rattle Devices

Ball Mount Basics: Weight Capacity, Class, and Size

Brake Controller 7- and 4-Way Installation Kit (ETBC7)

Determining Trailer Tongue Weight

5 Things to Know About Weight Distribution Hitches

How to Install a Weight Distribution Hitch (With Pictures & Video)

Towing a Trailer? Let's Talk About Brake Controllers

How Level Should a Tow Bar Be When Flat Towing

Solar Panel Recommendation for Trickle Charge on Winch Battery

I recommend installing the OptiMate Solar Duo Roof Mount Solar Charging System with Controller #MA49JR which is rated for 10 Watts and 12V batteries from 2 to 240 amp-hours. This provides a trickle charge and comes with a controller so you can be…

view full answer...

Available Pintle Mounts for 2-1/2-Inch Hitches

Yes, we have pintle hook mounts for 2-1/2-inch hitches that are similar to the 3-inch Reese Super Titan #RP38186. All of them can be seen on the page I linked for you. Pintles generally do not have a class rating, just a weight rating. The highest…

view full answer...

What Diameter Hitch Pin Does BulletProof Hitches Adjustable 2-Ball Mount Use

The BulletProof Hitches Adjustable 2-Ball Mount for 3" Hitch #58388 that you are interested has a 5/8 inch diameter hitch pin hole which is the standard size for 3 inch hitches. Most likely this is what you have as a 3/4 inch diameter hitch…

view full answer...

Can You Use a 5/8" Hitch Pin On 3" Hitch with 3/4" Hitch Pin Hole

If the trailer hitch has a 3/4" diameter hitch pin hole then that is what you'll need to use when towing with said hitch even when using an adapter such as the Curt Hitch Receiver Reducer Sleeves part #C45408. If you don't have a…

view full answer...

Available Sizes of Lunette Ring Trailer Couplers

Lunette rings do come in more than one size. The linked page displays both 2-1/2-inch and 3-inch inner diameter. . Lunette ring accessory items are also shown on the other linked page. Weight capacities for lunette rings are substantial, ranging from…

view full answer...

Will Demco Stay-IN-Play DUO Not Work if Battery Dies

Correct, you do need a working battery for activation and continual operation of the Demco SBS Stay-IN-Play DUO Supplemental Braking System #SM99251 and Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor #DM86VR. If you…

view full answer...

Replacement Converter for WFCO WF-8955PEC for Lithium Batteries

To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.

view full answer...

Since the payload will affect the rear suspension only, I wouldn't worry about the front suspension. A front helper spring will typically be used to offset the weight from a front mounted accessory like a plow. For the rear suspension of your…

view full answer...

Should Hitch Ball Angle Be Adjusted Up and Down or Angled to the Rear Using Weight Distribution

The hitch ball angle adjustment on weight distribution systems is designed to provide more or less distribution of the tongue weight on your trailer hitch to the trailer and vehicle axles. If you adjust the ball angle farther away from the towing…

view full answer...

Are the Optronics Jeep Style Universal Trailer Tail Lights available in LED Version

The LED version of the Optronics Jeep Style of taillights that you referenced #ST60RB are available as part #STL60RB for the passenger side and #STL60RLBP for the drivers side. These LED lights are stud mounted, as you requested and have 16 diodes…

view full answer...

Keeping Your Battery Charged While Using The Demco Stay-In-Play DUO Supplemental Braking System

The Demco SBS Stay-IN-Play DUO Supplemental Braking System - Proportional #SM99251 is going to be connected to your vehicle's battery to be powered which will drain your vehicle's battery. To keep the battery charged while towing you can…

view full answer...

What is the Difference Between The 2-1/2 Inch Pintle and a 3 Inch Pintle

Pintle hitches are made to fit certain sized Lunette rings. The rings that we carry are only available in 2-1/2" or 3" diameter sizes. For example, the Curt Pintle Hook for 2" Hitches #C48004 fits lunette ring couplers with a minimum…

view full answer...