Fastway Flash E Series Ball Mounts Lock and Adjustment Pin Review Video

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

The capacity for the lock set part number #FA86-00-3660 that you referenced is going to be the max capacity the ball mounts these are designed for have. That would be 10,000 lbs total trailer weight and 1,000 lbs tongue weight.

If one of the hitch pins you have now has a usable pin length of at least 3-7/8" then you can use it on the adjustment portion of the Flash E Series Adjustable 2-Ball Mount w Chrome Balls part #FA42-00-2600. If not then you would want to use the…

There is an aluminum ball mount that will allow you to use both 1-7/8" and 2-5/16" hitch balls, but since there isn't a combo ball with those sizes together, you'd have to get the 1-7/8" ball separately. So you have two options…

The Flash E Series Adjustable 2-Ball Mount w Chrome Balls part #FA42-00-2600 would be the prefect fit for your 2019 Ford F-150. It is designed to work with the 2" hitch currently on your truck. The weight limit for the 2" Ball is 8,000 lbs…

I'm not totally sure what your first question is but I believe you are asking what the maximum drop of this system is. The max drop figure for the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers #325-GH-1425 is 15 inches. This is not designed to…

So the answer to the exact adjustable ball mount you need really depends on the amount of rise or drop you require. If you aren't sure how to measure for that, I've added a link to a help article detailing how to determine that. With that in…

To get an aluminum adjustable ball mount that can have a 1-7/8 inch ball on it you would need to replace the balls of the # FA42-00-2400 with the part #DTBM23 and then you would have a 1-7/8 inch ball and a 2 inch ball.

There are three pins on the Pro Series Adjustable 3-Ball Mount part #63070; one to rotate the tri-ball assembly (spindle pin), one to remove the tri-ball assembly (shank pin), and one to hold the shank inside of the receiver tube (hitch pin). In…

Yes, the 4-way to 7-way adapter part #37185 that you referenced does fit your 2018 Ford F-150 that has a 4-way on it currently. If you need to activate either the brake controller or 12 volt accessory wire circuit of the 7-way the wiring is present…

The short answer is anywhere that you can! You may need to get some short cables to wrap around each frame rail then hold them together with quick links and attach the safety cables from the RV to the quick links. Set #BX88208 is a great option…

To get around this, you're going to need to the: -Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles #RM-152-98146-7. This kit is going to include everything you need to turn your 4-pole to a 6-way trailer connector so you can complete…