HydraStar Marine Electric Over Hydraulic Actuator Review Video

In regards to an electric over hydraulic actuator, the 1,000 psi model is for drum brakes and the 1,200 psi model is for disc brakes. The size of the axle, etc. are not factors. The most popular option we offer is the HydraStar Vented Marine Electric…

The only difference between the Demco Channel Tongue Trailer Coupler part #12564 and Demco Channel Tongue Trailer Coupler part #DM12717 is the bolt pattern which is just slightly different with one having an extra hole.

We aren't manufacturers of those parts, and we don't have the testing ability in house, so I reached out to a couple of our manufacturers to see what information they could provide to try and help. I reached out to my contact at Curt…

The only difference in the Demco Channel Tongue Trailer Couplers #DM16080-95 and #DM15931-95 is going to be the bolt pattern. One will have the 5-Bolt hole pattern and the other is going to have 4-Bolt holes. I have included images below showing the…

You'd be fine to have a weight distribution installed on your trailer as you travel on the hill you described. If anything it might help prevent the trailer from leaning excessively. For a 6,000 lb trailer you'd be looking at a tongue weight…

There are a few different diagrams for the Titan BrakeRite EHB Electric-Hydraulic Actuator depending on which model you have. For example, if you have the RF model then you will use the diagram (see photo 1) with a 4-way as that is all that is…

I have attached the wiring diagram for the Titan BrakeRite EHB Electric-Hydraulic Actuator #T4822500 that you referenced. This particular actuator is designed for use with hydraulic drum brakes and features 1,000 psi of hydraulic pressure. I have…

According to Titan, the EHB Adapter, part #T4845900 is NOT necessary with a Titan Brakerite like part #T4813102 if your OE brake controller has an electric over hydraulic mode. If it does, simply switch it to EOH mode. If it only has the electric…

Can you tell me what axle capacity the trailer has? I don't have the ability to look up trailer component info based on the VIN at this time.

Hydraulic brakes are better suited for boat trailers for the simple fact that wires and water do not like to cooperate with each other, but the etrailer.com Self Adjusting Electric Trailer Brakes, #AKEBRK-35L-SA, can be used on a boat trailer…

That is a tough question to answer as both are excellent manufacturers with their respective pros/cons. In regards to brake actuators, they both make and manufacture them here in the U.S.A. and they both come with a one year warranty. In regards to…

I reached out to Demco to get the bolt hole spacing on the Demco Channel Tongue Trailer Coupler #DM13203-52. The bolt holes measure 3/4 in from the top of of the coupler to the center of the hole. This is the same measurement for the distance from…