Mounting Bolt Pattern for Demco Channel Tongue Coupler
Question:
What is the dimension from top plate of coupler to the bolt holes how far down from the top and is the ball tension tightness while locked adjustable with this coupler?
asked by: Eric
Expert Reply:
I reached out to Demco to get the bolt hole spacing on the Demco Channel Tongue Trailer Coupler # DM13203-52. The bolt holes measure 3/4 in from the top of of the coupler to the center of the hole. This is the same measurement for the distance from the bottom of the coupler to the center of the lower bolt hole. I have attached a photo showing these measurements.
For this coupler there is not an adjustment for the tension on the hitch ball. I confirmed this with my contact at Demco. The coupler is adjusted at the factory since the Easy Latch design of this coupler works opposite to most other coupler designs. The spring tension of this coupler is designed to close the coupler, so the coupler can actually be attached to the hitch ball without having to lift the latch handle.
I have attached a review video of this coupler for you to check out.
Product Page this Question was Asked From
Demco Channel Tongue Trailer Coupler - Silver - 2-5/16" Ball - 3" Channel - Bolt On - 18K
- Straight Tongue Trailer Coupler
- Standard Coupler
- 2-5/16 Inch Ball Coupler
- Bolt-On
- 18000 lbs GTW
- 3 Inch Channel
- Auto Latch
- Demco
more information >
Continue Researching
- Shop: Demco Channel Tongue Trailer Coupler - Silver - 2-5/16" Ball - 3" Channel - Bolt On - 18K
- Video: Review of Brophy Lunette Ring - Lunette Ring with 5-Position Adjustable Channel Bracket - BR63ZR
- Shop: Ramp Spring - 2K Torque for 1-1/2" Round Shaft - LH
- Shop: Ramp Spring - 2K Torque for 1-1/2" Shaft - RH
- Search Results: rs16933lh
- Shop: Replacement Latch and Keys for Weather Guard D-Handle Steel Underbed and Hi-Side Tool Boxes - Key 21
- Shop: Demco Channel Tongue Trailer Coupler - Zinc - 2-5/16" Ball - 3" Channel - Bolt On - 18K
- Shop: Demco Channel Tongue Trailer Coupler - eZ-Latch - Zinc - 2" Ball - Bolt On - 10,000 lbs
- Video: Review of Demco Straight Tongue Trailer Coupler - Standard Coupler - DM13203-52
- Shop: Dexter Zinc-Plated Straight-Tongue Coupler - 21,000 lbs
- Video: HydraStar Marine Electric Over Hydraulic Actuator Installation
- Article: How to Choose a Trailer Hitch Coupler
- Search Results: f78 14st tire
- Search Results: st20575r14
- Search Results: st205 75r15
- Search Results: demco auto
- Q&A: Comparing Demco and Titan Disc Brake Actuators with Electric Lockouts
- Q&A: Lock Recommendations for Demco DM13203-52 eZ Latch Trailer Coupler
- Search Results: actuator
- Q&A: Does the Demco Channel Tongue Trailer Coupler Come with Installation Bolts
- Search Results: 2 516 coupler
- Video: Review of Hydrastar Brake Actuator - Electric-Hydraulic Brake Actuator - HS481-8067
- Video: Review of Demco Straight Tongue Trailer Coupler - Standard Coupler - DM16080-81
- Video: Review of Titan Brake Actuator - Surge Brake Actuator - T4857220
- Q&A: Dimensions of Demco # DM14793-81 Trailer Coupler
- Q&A: Comparing Demco Channel Tongue Trailer Couplers # DM16080-95 & # DM15931-95
- Video: Review of Demco Adjustable Trailer Coupler - DM13867-52
- Q&A: Can Dexter Electric Brakes be Used in Saltwater and Freshwater
- Q&A: Bolt Pattern for Demco Hydraulic Brake Actuator DM72VR
- Article: Adding Electric Over Hydraulic Disc Brakes