Customers compare C17499 to these similar products
Products Featured in this Video
Speaker 1: inaudible 00:00:01 Speaker 2: Today, we're taking a look at the CURT TruTrack Weight Distribution System with integrated sway control. Now this system is designed to evenly distribute weight over the axles of your tow vehicle and trailer. It offers improved stability and control, and ultimately, it creates a more level ride for both the tow vehicle and the trailer.It… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
It is not a good idea to use weight distribution with a folding tongue due to the amount of force applied by the spring bars to the trailer. If you were to do it you would need to have a pole tongue adapter such as #RP58393 since the trailer does…
view full answer...We aren't manufacturers of those parts, and we don't have the testing ability in house, so I reached out to a couple of our manufacturers to see what information they could provide to try and help. I reached out to my contact at Curt…
view full answer...The only difference between the Demco Channel Tongue Trailer Coupler part #12564 and Demco Channel Tongue Trailer Coupler part #DM12717 is the bolt pattern which is just slightly different with one having an extra hole.
view full answer...In regards to an electric over hydraulic actuator, the 1,000 psi model is for drum brakes and the 1,200 psi model is for disc brakes. The size of the axle, etc. are not factors. The most popular option we offer is the HydraStar Vented Marine Electric…
view full answer...If you have a 5 on 4-1/2 inch bolt pattern on your hub with 8 inch wheels, you will be able to use the 10 inch wheels with a 5 on 4-1/2 inch bolt pattern on that hub. The center hole diameter on the 8 inch wheels and the 10 inch wheels are the same…
view full answer...When it comes to choosing between the Curt TruTrack Weight Distribution System w/ Sway Control #C17499 and the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control #EQ37100ET you'll want to take a couple of things into consideration: 1.…
view full answer...The issue you most likely ran into is that winches draw way more amperage than what the 12 volt accessory wire of your 7-way can provide. You would have needed something like the part #BDW20207 to power your winch. Your going to have to start…
view full answer...We don't carry the replacement bolt you'd need for the Fulton Fold-Away Coupler Hinge Kit #FHDPB330301 but the bolt is a 5/8 inch diameter Grade 5 bolt so your best bet would be to find a nut and bolt that matches that at a local hardware…
view full answer...The Grand Design Imagine XLS 17MKE weighs in at 6,395 lbs fully loaded so for an appropriately sized weight distribution system, I recommend the Reese Pro Round Bar Weight Distribution part #RE94FR which is rated for up to 8,000 lbs. This system will…
view full answer...You do not need to connect the 12V power connection on your F-150 7-way. That power is only required if you want to charge a trailer battery while towing or if you are using an electric device on your trailer like a powered sway control or wireless…
view full answer...I can answer that question for you and provide you with some resources to aid you with picking a weight distribution hitch that is right for your setup. A weight distribution hitch uses spring bars to help apply leverage to either side of your setup,…
view full answer...A hitch ball like the part #A-90 would work great with the Curt weight distribution system part #C17499. This has a shank diameter of 1-1/4 inch and a length of 2-5/8 inch. There isn't an exact length requirement but this length for sure works…
view full answer...