Gen-Y Phantom X Hitch Ball Mount Review GY39VR Video

I have a recommendation for you as the Roadmaster Dual Hitch Receiver Adapter #RM-077-6 cannot be used with trailer towing. Instead you can use the Gen-Y Phantom X Hitch Ball Mount #GY39VR. This has a similar design with multiple receivers. The…

A scooter carrier is a bit heavy but we do have dual hitch adapters like the Roadmaster part #RM-077-6 which have a tongue weight capacity of 400 lbs and is designed for flat towing a vehicle and carrying an accessory above it.

The dual hitch adapter we carry with the highest tongue weight capacity is the Roadmaster Dual Hitch Receiver Adapter part #RM-077-6 for 6" rise or part #RM-077-8 for 8" rise. They both have a 400 lb tongue weight capacity. Please…

We have actually reached out to Roadmaster and verified that the Dual Hitch Receiver #RM-077-4 can indeed be used with a tow dolly. As long as you stay under it's 400 pound tongue weight capacity this is a perfect solution for you. I have…

As long as you are not exceeding the tongue weight rating of the trailer hitch receiver or dual hitch receiver adapter, you will not have any issues adding your 150lb accessory with the adapter as is, but I do not recommend modifying the adapter in…

Fulton ball mounts, like the #F47CR, are made overseas in China. If you were looking for something American made, you would need to go with something like the Convert-A-Ball #AMSC4. The Convert-A-Ball will have a higher 10,000 pound capacity, the…

I took a look at the Ram's owners manual and it states if the trailer weighs more than 1,000 lbs loaded, it should have its own brakes. Towing the 3500 lb trailer without braking could lead to accelerated brake lining wear, higher brake pedal…

The Buyers Products Adjustable Tri-Ball Hitch part #3371802225 and the Curt Multi-Ball Adjustable Ball Mount part #D900 are both very similar. The main difference as you mentioned is that the Buyers Products Ball Mount has a longer shank which then…

The Roadmaster Trailer Hitch Locks #RM-316 is a 5/8 inch diameter pin that is 4 inches to the bend when the lock is on. I went out to the warehouse and measured to confirm this for you. I've attached a photo as well.

MaxxTow doesn't offer an adjustable ball mount that uses a 1-7/8 and a 2 inch ball, but Buyers Products offers the #3371802225 which offers a 1-7/8, 2 and a 2-5/16 inch trailer ball. With the 1-7/8 ball in use, the adjustable ball mount has a…

I don't have a way to add a second receiver to the Blue Ox Adjustable Drop Hitch Receiver Adapter part #BLU28XR but if you like the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers part #325-GH-214 option, there's another more cost…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…