Malone Hitch Adapters - Hitch Extender - MPG544 Review Video

One thing to note when using a hitch extender like the etrailer, #e88YR, is that the tongue weight and towing capacity of your trailer hitch will be reduced by 50 percent due to the increased leverage that is placed on your trailer hitch from your…

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit your 2023 Ford F-350 dually. It features a bolt-on installation and has a 2" receiver. The hitch has a 9,000 lb line pull, 500 lb vertical load, and 5,000 lb gross trailer weight.…

Yes, there is a front mounted hitch for your 2022 Ford F-350 dually with a diesel engine. It is the EcoHitch Hidden Front Mount Trailer Hitch Receiver item #EH83GR. This hitch is custom fit and bolts to your Ford with included hardware. This front…

Thanks for reaching out! For your application I recommend checking out the etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates #e74ZR because the Blue Ox connectors are designed to fit prongs that are much closer than what you…

The Roadmaster Falcon All Terrain, Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 6,000 lbs #RM-522 will fit right into the receiver on your motorhome when you remove the ball mount. This is a more ideal option for towing your vehicle. If…

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

The backing plate of the Surco Bike Rack part #BT300 that you referenced attaches to the rim by it sliding over the mounting plate for the wheel and then using the lug nuts that attach the wheel to the vehicle as a way to secure the wheel and the…

The Thule EasyFold XT 2 Electric Bike Platform Rack #TH903202 that you referenced doesn't have taillights built into it. It's also not a normal requirement to have to add trailer lighting to a rack that has a cover but we have seen people add…

What you're wanting to do can be accomplished, but we'll need to get you some different equipment because you never want to use 2 adapters, and from my experience all of the dual receiver options using the style you're showing in your…

I have included a picture showing Draw-Tite front mount receiver #65076 installed. It and the Curt hitch install in pretty much the same place.

The Malone MicroSport Trailer part #MPG460G comes with all of the necessary related documents that will be needed to register the trailer. Once you obtain these documents you will want to take them with you to your local department of motor vehicles…

The wall thickness of the steel can vary from item to item but generally the wall thickness for hitch extender #HE06 is 3/16 to 1/4 inch. For the majority I have seen, it is 1/4 inch.