Customers compare TLA7752 to these similar products
Products Featured in this Video
Today on our 2014 Acura MDX, we're doing a test fit of the Torklift Lock and Load cargo carrier. It is 27 3/4 by 24 inches. Has a weight capacity of 500 pounds. The part number for that is TLA7752. The first thing we're going to do is take a few measurements here. Our ground clearance would be first.… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The 24x27 TorkLift Lock and Load Maximum Security Cargo Tray #TLA7752 that you referenced is rated for the rougher ride quality that is present at the rear of travel trailers like yours which is a bit rougher like you noticed. I attached a picture of…
view full answer...I would love to help but finding a cargo carrier with everything you need is going to be an extremely difficult task. The main issue is going to be size/weight. Most cargo carriers that can accommodate the 27.6" depth of your generator are not…
view full answer...The Pro Series Cargo Carrier you mentioned, part #PS1040100 offers 12 inches of clearance between the pin hole and closest portion of the basket portion of the carrier. The distance between the hitch pin hole and the bend in the shank is 5 inches,…
view full answer...The tray dimensions of the #TLA7752 are 27-3/4" long x 24" wide and the strap adjustment range is 13-3/4" long x 6-3/4" wide x 13-1/4" tall as a minimum and 27-3/4" long x 23-1/2" wide x 23" tall as a maximum.…
view full answer...Yes the SoftStartRV like the part #SSR44FR which is a pair of them is universal and would work great on Coleman Mach Q units as like you noticed these are universal.
view full answer...I spoke with my contact at Tork Lift and he informed me that the TorkLift Lock and Load #TLA7752 that you referenced has a 500 lb capacity. I attached a review video for you to check out as well.
view full answer...The Roadmaster Dual Hitch Receiver Adapter #RM-077-10 weighs 29lbs.
view full answer...The interior dimensions of the 23" x 51" UWS Cargo Carrier for 2" Hitches #UWS65XR is 20-1/2" x 48 1-/2". As far as a floor, there is not a traditional floor but there are strips of aluminum that line the bottom vertically…
view full answer...If your 2019 Mercedes-Benz Sprinter 2500 has a standard bumper without the step, the Draw-Tite #75549 is going to provide you with the most ground clearance at 15" from the bottom of the receiver tube to the ground. If your Sprinter has the…
view full answer...I recommend using the Yakima BackSwing Swing Away Hitch Extender #Y02483 with the 24x27 TorkLift Lock and Load Maximum Security Cargo Tray #TLA7752. This will allow for you to secure your Honda generator that is smaller than 24" wide by 27"…
view full answer...You are correct there is a weight advantage for aluminum, item #C18100, over steel, item #CC-100, but the biggest reason aluminum is considered over steel, for most of our customers, is corrosion resistance and appearance. You do not need to upkeep…
view full answer...Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…
view full answer...