Roadmaster Dual Hitch Receiver Adapter Review RM-077-4 Video

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

I recommend the Roadmaster Dual Hitch Receiver Adapter, 10" Drop/Rise item #RM-077-10. This adapter was designed for this type of set up. Your Jeep Rubicon and Swagman E bike rack weigh well below the 10,000 lbs maximum capacity of this…

In order to use a hitch-mounted bike rack like the Swagman Original #S64152-2 that you were looking at while towing a vehicle, you will just need to add the Roadmaster Dual Hitch Receiver Adapter #RM-077-4. This adapter will slide into the 2 inch…

I checked with our manufacturers for you, and was able to verify a fit for a trailer hitch on your 2024 Chevy Trax. The hitch is made by Curt and the correct part number is the following: - Curt Trailer Hitch Receiver #C75VV If you'd like to…

There are 2 different capacities independent of each other though related. Tongue weight is the downward force or weight on the trailer hitch. So it is pushing down at the back of the vehicle. The gross trailer weight is the weight of whatever it is…

Yes, you can use this Roadmaster Dual Hitch Receiver Adapter #RM-077-4 to use a tow bar to flat tow a vehicle and then simultaneously carry a hitch accessory like a bike rack or cargo carrier on the top hitch opening. Check out the picture I attached…

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

Sounds like you have a high low adapter currently that has 4 inches so for a similar dual hitch adapter you'd want the part #RM-077-4 which has the same 4 inch drop and a hitch opening above it for your bike rack.

The weight capacity of the Malone Dual Hitch Extender, part #MPG544, is 4000 lbs and 400 lbs for tongue weight. Using this extender reduces the towing weight capacity of the hitch on your vehicle by 50 percent. If the hitch that is installed on your…

If you used the Roadmaster Dual Hitch Receiver Adapter #RM-077-4 with your tow bar setup and motorcycle carrier it would take a really sharp turn to potentially cause interference since tow bars are pretty long. I don't think you'd have an…

If you're wanting to use the Roadmaster Dual Hitch Receiver Adapter #RM-077-2 for towing a tow dolly then yes, either receiver can be used. If you're talking about towing a trailer then we need to find you a different adapter because these…

As long as you are not exceeding the tongue weight rating of the trailer hitch receiver or dual hitch receiver adapter, you will not have any issues adding your 150lb accessory with the adapter as is, but I do not recommend modifying the adapter in…