Dutton-Lainson Round Swivel Jack Review Video

We definitely have some trailer jacks you can use as a replacement for your Dutton-Lainson but it doesn't look like anything we have will work as a direct replacement. If you'd like to stick with the Dutton-Lainson brand then I recommend…

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…

Yes, since your current Fulton jack is a bolt-thru style, you can use the Fulton XLT Bolt-Thru Swivel Trailer Jack #F26ZR with your current welded on bracket. You just need to remove the jack from the included bolt-on bracket and mount it to your…

Any given tire size will fit a range of wheel widths. For a 175/80-13 trailer tire it will fit a 13 inch wheel that is 4-1/2, 5, or 5-1/2 inches wide. Wheel #AM20222DX is a 13 x 4-1/2 inch wheel so a 175/80-13 tire will fit on it. This wheel has a 4…

My contact at Ark said the mounting plate for the Ark XO Drop Down Corner RV Stabilizer Jacks #ARK87FR can be installed by modifying it and using countersunk bolts. Attached is a photo of the dimensions for you to reference (117mm long x 72.50mm wide…

If you are not wanting a bolt-on jack such as the Fulton XLT Bolt-Thru Swivel Trailer Jack, #F26ZR we have the Fulton F2 Adjustable A-Frame Jack, #F1413250334. The F2 Series jack is specially designed for use with Fulton's F2 A-frame coupler. If…

The Titan Zinc-Plated, Leverlock Coupler #T4845000 measures 4-1/8 inches tall, so it looks like it may be too tall for your set up. If so, the only other 5,000 lb coupler for a 2" hitch ball that may work is one that has half of the height, the…

Since you'll be moving the trailer around by hand on a paved surface, you really wouldn't need a double wheel jack like the Fulton #F27CR. Dual wheels would actually make the trailer a bit more difficult to maneuver around by hand on a paved…

I did some searching around on the internet and came up with a few interesting tips to prevent rodents from eating vehicle/trailer wiring. Here is what I found: Noise will keep the rodent's away. So a portable radio would work for this. Flashing…

There many possible ways to mount a stabilizer jack such as the #TJ01RT-HD you looked at. Mounting them in the orientation shown the diagram would tend to work a bit better to stabilize the trailer against side to side movement, while having the…

I have a replacement jack option for you, but unfortunately there are no replacement parts available for your Wesbar Model 9500 Jack on your 1979 Aristocraft boat trailer. Instead I recommend replacing it with the Fulton Bolt-Thru Swivel Marine Jack…

When folded up and traveling the Xtreme Off-Road Ratcheting Trailer Jack item #ORJW750BD is 29" long from the top of the jack to the bottom of the wheels. From the bottom of the wheel to the center pivot point where the bracket attaches is…