Review of etrailer Accessories and Parts - E98900 Video

Accuracy is the most important thing when it comes to tongue weight scales in my opinion and convenience is a plus. The etrailer Tongue Weight Scale #e99044 is both. I have gotten my hands on this product and used it. One of my favorite things about…

The Camco RV Water Heater Anode Rod part #CAM11563 is what you need for the suburban SW6D water heater.

Unless your trailer has dually wheels then you would need to look at just the single tire capacity. On dually wheels the weight isn't exactly always distributed evenly so the lower capacity compensates for that so that no one single tire in the…

13 inch trailer wheel/tires like the size 185/80-13 like part #AM1ST79 are rated for up to 81 MPH. Most trailer tires are only rated for 65, so if 65 is the limit you have then you'd be good.

Ultimately the tongue weight of a trailer could be anything regardless of what the weight or GVWR of the trailer is. You want to shoot for a tongue weight that is 10-15% of the weight of the trailer though so if your loaded trailer is 2,820 lbs and…

Your ride quality issue is caused by not having enough tongue weight like you mentioned. You need the trailer tongue weight to be between 10 and 15 percent of the total trailer weight. Your tongue weight being 450 lbs while the trailer weighs 6,300…

Class S chains are designed for vehicles with more restricted clearances in the wheel wells. Class U chains are for vehicles with more wheel well clearances. If your owners manual calls for Class S you would not have the clearance for a Class U…

We do offer tire chains to fit your tire size 275/70R18, shown on the linked page, but you'll want to check your vehicle owner's manual to confirm that the auto maker approves use of tire chains. Some vehicles can use chains only on one axle;…

Class U tires chains need at least 0.91" (23mm) sidewall clearance and the Titan Chain Alloy Snow Tire Chains #TC2533 have a link thickness of 0.216" (5.5mm) so you will be just fine to use these on your 2019 Ram 3500 with 275/70R18 size…

Bulldog Winch Wirelesss Controller #BDW20099 is designed for 2,000 and 3,000 pound ATV winches with off-center drums. These winches draw up to 120 to 130 amps at full load. So you would not want to go over 130 amp draw for this unit.

The Bulldog 4,400 winch part #BDW15020 that you have has the power unit over the motor so you would need the winch cover specifically designed for that, part #BDW20190.

The Bulldog Winch Trailer Winch #BDW15020 you referred to has the power unit over the motor, as I've pointed out in the accompanying photo. Because of that there is a specific cover you need, the Bulldog Winch Neoprene Cover - Truck Winch w/…