Curt Class I Drawbar Review C45024 Video

We haven't had the chance to install either the Curt #C11529 trailer hitch on the 2018 Hyundai Kona, so I'm not going to have a precise measurement for you at this time. That said, from what I can tell, based on the installation photos, this…

In order to select the correct amount of rise or drop you would need you will need to take a couple measurements. The goal is to have your trailer sit as level as possible. The first thing you will need to do is park your tow vehicle on level ground…

The Curt bar #C45028 (5-3/8 inch rise or 6-inch drop) you referenced is one of 3 Curt drawbars we currently offer that will have a 5 inch or more rise in the shank. The reason other shanks may have a different rise is because it may have a different…

On Curt Euro ball mount #C45592 we are measuring from the top of the shank to the point below the ball where it starts to go straight up and down. I have linked a video that should clarify this for you. Curt must be measuring to the top of the ball.

Ball mounts including Curt ball mounts #C45024 and #C45014 are given their rating based on how they are tested and which applications they are made for. Other than that and the capacity they are pretty much the same.

We carry several ball mounts that have a 2 inch rise. I attached a link to a page that has all of them listed. The most popular one we carry for a 1-1/4 inch hitch would be part #C45521 and for a 2 inch hitch part #C45230. We do carry a 2 inch hitch…

I would be happy to help you out. On the CURT Ball Mount, #C45024, from the center of the hitch pin hole to the near end of the ball mount measures 1-1/2 inches. From the center of the ball hole to the back edge of the ball platform towards the car…

You will want to check the towing capacity of each motor and transmission combination in the vehicles you are referencing. For instance, the 2018 Highlander can tow 5,000 lbs in most cases but there is a model that can only tow 1500 lbs. For the 2018…

For hitch balls we recommend white grease like the part #58117 since the ball moves around in the coupler but for the hitch itself there isn't a grease recommended for that.

Yes, the Tekonsha T-One 4-Pole Wiring Harness #118718 will work fine to power LED lights on a trailer or accessory carrier used with your 2019 Mazda CX-3 but it does require the 12V power wire connection in order to function. The plug-in connectors…

The Curt Class II Drawbar part #C45000 is indeed compatible with the 1-7/8" Hitch Ball part #C40001 and the Curt Hitch Pin and Clip part #C21403. The Curt Class II Drawbar measures 13-1/2" from the center of the hitch pin hole to the center…

To apply grease to the top of a hitch ball with the part #58117 all you would need to do is apply a small amount to the top of the ball. The coupler will then push the grease around and spread it evenly on the ball.