Does the # 24963 Fit My 2022 Hyundai Ioniq Hybrid?

Question

Question:

Is the hitch for 2022 hyundai ioniq for the ioniq hybrid or ioniq 5 EV? The web page is not clear. Thanks

asked by: Kenneth L

0

Expert Reply:

I can definitely set the record straight for your 2022 Hyundai Ioniq. I went ahead and called my tech at Horizon Global (the makers of Draw-Tite hitches), and he confirmed that the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - 1-1/4" # 24963 fits a hybrid model but not the plug-in hybrid/EV model. If you have the hybrid model, this hitch fits your Ioniq.

expert reply by: Bob C

0

Answer 1

Your 2022 Hyundai Ioniq PHEV is going to require the T-One Vehicle Wiring Harness #118758. The Curt Harness #C56233 you found is only for the Blue hybrid trim. I currently see the PHEV was only offered for the SE, SEL and Limited trims.

view full answer...

Answer 2

According to my research the 2021 and 2022 model years for the Hyundai Ioniq are pretty much identical so both the Curt #C11486 and Draw-Tite #24963 Class I hitches will fit just fine on your 2022 model. We've actually had a few customers…

view full answer...

Answer 3

The hitch options for the 2017 Hyundai Ioniq are Class I, 1-1/4" inch hitches. There is not a 2 inch receiver available because the Ioniq is not designed to handle the weight capacity of a 2 inch receiver. I recommend Draw-Tite hitch part…

view full answer...

Answer 4

For your 2019 Hyundai Ioniq the hitch I recommend is the Curt part #C11486 to carry your bike rack. This hitch has more than enough capacity for a 2 bike rack like the Thule Camber #TH9058 and was made in the USA so it's a really great…

view full answer...

Answer 5

Sounds like you are trying to determine where the Curt hitch part #C11486 is going to sit when installed relative to the bumper of your vehicle. When we installed this hitch on a similar 2018 Hyundai Ioniq we found that from the center of the hitch…

view full answer...

Answer 6

Any type of hitch adapter or extender will have the unavoidable side-effect of causing a loss of about half of your hitch's rated capacity, both its tongue weight (TW) and it's gross towing weight (GTW). Hidden Hitch extender #HE18…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Does the # 24963 Fit My 2022 Hyundai Ioniq Hybrid?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching