4-Way Vehicle Wiring Harness Compatible With 2022 Hyundai Ioniq PHEV

Question

Question:

Trailer wiring harness for 2022 Hyundai Ioniq PHEV? Will this harness fit the connectors of the 2022 Hyundai Ioniq PHEV? If not, can you recommend one that will? Thanks!

asked by: Adam

1

Helpful Expert Reply:

Your 2022 Hyundai Ioniq PHEV is going to require the T-One Vehicle Wiring Harness # 118758. The Curt Harness # C56233 you found is only for the Blue hybrid trim. I currently see the PHEV was only offered for the SE, SEL and Limited trims.

expert reply by: Bud M

1

Answer 1

I can definitely set the record straight for your 2022 Hyundai Ioniq. I went ahead and called my tech at Horizon Global (the makers of Draw-Tite hitches), and he confirmed that the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit -…

view full answer...

Answer 2

For your 2019 Hyundai Ioniq the hitch I recommend is the Curt part #C11486 to carry your bike rack. This hitch has more than enough capacity for a 2 bike rack like the Thule Camber #TH9058 and was made in the USA so it's a really great option.…

view full answer...

Answer 3

Sounds like you are trying to determine where the Curt hitch part #C11486 is going to sit when installed relative to the bumper of your vehicle. When we installed this hitch on a similar 2018 Hyundai Ioniq we found that from the center of the hitch…

view full answer...

Answer 4

The hitch options for the 2017 Hyundai Ioniq are Class I, 1-1/4" inch hitches. There is not a 2 inch receiver available because the Ioniq is not designed to handle the weight capacity of a 2 inch receiver. I recommend Draw-Tite hitch part #24963…

view full answer...

Answer 5

According to my research the 2021 and 2022 model years for the Hyundai Ioniq are pretty much identical so both the Curt #C11486 and Draw-Tite #24963 Class I hitches will fit just fine on your 2022 model. We've actually had a few customers install…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...