Availability Of A 1-1/4" Draw Bar And 1-7/8" Ball With 0" Of Rise

Question

Question:

Hey, happy Monday! Im looking for a trailer hitch with 1 1/4 coupler 0 rise 1 7/8 ball Can you help? Thanks!

asked by: Cant F

0

Expert Reply:

Happy Monday to you as well! I do have a potential solution for you. We do not carry a draw bar with a true 0" rise, but what you can do is use the Curt Class 2 Drawbar # C45503. This has a 3/8" rise, and will be the closest thing we have to a 0" rise. You can use it with the 1-7/8" hitch ball # C40001. Keep in mind that with this setup, you are limited to towing 2,000 lbs or less.

expert reply by: Jesse M

0

Answer 1

In most cases it's a bit safer to go on the slightly lower nose height setting instead of slightly higher since higher can sometimes cause sway. But if the vehicle is going to squat quite a bit from the weight of the trailer then the higher…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 5

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a…

view full answer...

Answer 10

I have attached a picture below of the Curt Hitch item #C26VV installed on a 2024 Toyota Grand Highlander. I really like this hitch because the crosstube installs behind the rear bumper leaving only the 2" receiver exposed. The Curt Hitch…

view full answer...

Answer 11

We have both a trailer hitch receiver as well as the wiring you need for your 2024 Hyundai Palisade. I verified both fits directly with the manufacturer for you, and the correct parts are the following: - Curt Trailer Hitch Receiver #C13427 -…

view full answer...

Answer 12

The best hitch for a 2024 Hyundai Tucson is the etrailer Hitch item #e38KR. This hitch is custom fit and bolts to your Tucson with included hardware. It is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 525…

view full answer...

Availability Of A 1-1/4" Draw Bar And 1-7/8" Ball With 0" Of Rise

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching