Curt Ball Mount Review C45090 Video

If the trailer is less than 1 inch off of being perfectly level either up or down then it will be perfectly fine. Having it slightly higher would be better because presumably the tongue weight of the trailer will pull it down a little. You could also…

I attached a picture that shows the CME-PCL-INS as well as a help article that covers this portion of trailer wiring installs as well. Overall it's not a difficult process but it does take some time routing it up to the front of the vehicle.…

The Yakima SightLine Towers #Y64AR and RidgeLine Towers #Y00145 are very similar. The main differences is the SightLine is slightly shorter by 1/2" at 3" tall. Also the SKS Locks #Y07204 is hidden behind the outer cover on the SightLine…

Since the Class I Curt Trailer Hitch Receiver #C11419 for your 2017 Kia Soul can tow up to 2,000 lbs it will be able to handle the weight of either trailer, but the 1,650 lbs and 1,800 lbs weight ratings you're seeing is the max amount of cargo…

I may have a solution for you, but we don't have any Euro style drawbars with a 7" rise and after doing some digging I'm not quite sure they are available that tall . With that said, you may be able to use the Curt #C45591 which has a…

2 inch or 2-5/16 inch diameter balls are pretty standard sized balls, it is not surprising that the coupler on the 1997 Coleman camper accepts either one of those sizes. For a 2 inch ball I would recommend a Hitch Ball with 2 inch Diameter and Medium…

There are a number of options for routing the hot lead to the battery when installing the T-One Vehicle Wiring Harness #118767 in your 2015 Honda Fit, but since this harness mounts outside the vehicle the best option is to run it along the exterior…

There isn't a specific distance you want to have between the bumper of a vehicle and the hitch ball, but in general you'll want more than an inch. This will give you additional leeway when hitching up the trailer so that you don't slam…

The length from the pin hole to the ball on the #C45056 Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise is approximately 8-1/4". I have attached an image from Curt showing the dimensions as well as a video review for…

There are a couple things that come to mind that may help with the bounce that you are experiencing when towing the 24 ft pull behind trailer with your 2014 Chevrolet Silverado 1500. I would start by checking to make sure that your trailer isn't…

The trick here is to get as close as possible. If you are talking about less than 2 inches or so, there is nothing to worry about. Having the trailer tongue a bit too high is preferable to it being too low. You may be a good candidate for an…

You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…