Brophy Ball Mounts - Fixed Ball Mount - EA80 Review Video

You are correct about ball mount #EA80. The ball platform is indeed 1 inch thick. The 2 inch ball #63852 does not have a long enough shank to be used with this ball mount. You will need a 2 inch ball with a long shank such as #63849. It isn't…

For the Demco #DM13689-95 eZ-Latch coupler, we recommend the #e98887 which would install into the hole indicated in the photo I've provided.

I am certainly glad you are taking safety into consideration when trying to choose your coupler, although none of the Demco couplers would be considered "safer" than the others you mentioned. Among the Demco Channel Tongue Trailer Coupler -…

It's very easy to install a trailer brake controller on a 2021 Honda Ridgeline. I recommend the Tekonsha Prodigy P3 Trailer Brake Controller part #90195 which comes with a harness that you could simply attach to the one that came with the…

Other than the Tow Bar, you would need the wiring so that the lights on your Wrangler would work in tandem with the lights on the tow vehicle, and the vehicle-specific base plates that would attach to the Wrangler. The base plates provide an…

You are going to have to either change the hitch on the tow vehicle or use a different tow bar. For Roadmaster base plates on the vehicle you can use the Stowmaster tow bar with a lunette ring, #RM-581. Roadmaster does not offer an alternate lunette…

You can utilize the crossbar mounting system on your Roadmaster StowMaster Tow Bar #RM-501 as long as you use a Roadmaster Crossbar Style base plate on your 2013 Jeep Wrangler. We have a couple of different options depending on the sub-model of your…

Yes, the Roadmaster StowMaster Tow Bar part #RM-581 is compatible with any of the Roadmaster Crossbar-Style Base Plate Kits like part #425-1 which is for the 92-96 Ford F-150 and 92-93 Bronco.

I do have an option but the Roadmaster StowMaster Tow Bar part #RM-581 can not be used with a Blue Ox Base Plate Kit. The adapters are only available for motorhome mounted tow bars not vehicle mounted tow bars. The Blue Ox Allure Tow Bar part…

What you could do is use the center pin on a 7-Way and instead of having the reverse light circuit on that pin you could remove the wire that is there and run a 10 gauge wire, such as #10-1-1 sold by the foot, from it up to the truck battery via a 40…

To charge the battery in the Engager Trailer BreakAway Kit, #20099, you can attach the wire from the 12 volt circuit on the trailer side 7-Way (1 oclock position on the back of the trailer side 7-Way where the wires attach) to the input wire on the…

Breakaway batteries shouldn't power other accessories even if the battery is larger. You really need the breakaway battery to be topped off at all times in case you need it. If you were to power other accessories you run risk of it being…