Recommended Euro Style Drawbar with 7 Rise
Question:
I need a eurostyle draw bar that fits into 1 1/4 inch receiver. It has to have a 7inch rise. It can be a 1 7/8ths ball or 2 inch ball. Can you help me to find this. None have that tall of a rise.
asked by: Rodney L
Expert Reply:
I may have a solution for you, but we don't have any Euro style drawbars with a 7" rise and after doing some digging I'm not quite sure they are available that tall . With that said, you may be able to use the Curt # C45591 which has a 6-5/8" rise. This would be the closest solution to the 7" you're looking for.
If you were willing to use a non-Euro style draw bar, you could use the Brophy # BM96, which has a 5" rise from the top of the shank to the top of the ball mount platform. You could then use any hitch ball with a 3/4" shank, like the # 19254 (1-7/8" ball) or # 19258 (2" ball). This would put you close to 7" once you add in the ball and would likely provide you with a much better configuration to keep the trailer relatively level when towing.
I've linked some review videos of a few of these parts to check out.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 3-3/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 3-3/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop - 7-1/4" Long - 3.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 5 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- Brophy
more information >
Curt Class II Euro Style Drawbar with 2" Ball - 3-1/8" Rise - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Rise - 3 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Product Page this Question was Asked From
Curt Class II Euro Style Drawbar with 1-7/8" Ball - 6-5/8" Rise - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Rise - 6 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Continue Researching
- Shop: Trailer Hitch
- Search Results: 530~12
- Shop: Trailer Wiring
- Q&A: Can I Tow a U-Haul Trailer with My 2017 Kia Soul
- Shop: Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop - 7-1/4" Long - 3.5K
- Shop: Curt Class II Euro Style Drawbar with 1-7/8" Ball - 6-5/8" Rise - 3,500 lbs
- Video: Brophy Drawbar Review
- Video: Curt Ball Mount Review C45090
- Video: Curt Class II Euro Style Drawbar Review C45591
- Shop: Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2-1/2" Span
- Search Results: locking hitch pin
- Search Results: draw bar
- Search Results: draw bar
- Shop: Trailer Hitch Receiver Adapter 1-1/4" to 2" Hitch - 6-1/2" Long
- Shop: etrailer Trailer Hitch Receiver Lock for 1-1/4" Hitches - Flush - 2-1/8" Span - Chrome
- Shop: Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
- Shop: Curt Ball Mount - 6" Rise, 8" Drop - 11-1/2" Long - 5,000 lbs
- Search Results: thule cascade xt
- Search Results: trailer light harness
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2017 Ford Fusion
- Video: Curt Class II Drawbar Review C45015
- Q&A: Is There a Standard Wheel Pilot Hole Size
- Q&A: When Is It Necessary To Match The Correct Pilot Hole Size For Replacement Trailer Wheel
- Q&A: How to Measure Trailer Wheel Pilot Hole on 1997 Flagstaff Pop-Up to Determine Correct Grease Cap
- Q&A: Can A Wheel With A Larger Pilot Hole Work As A Replacement For A Wheel With A Smaller Pilot Hole?
- Q&A: Tire and Wheel Recommendation for Small Boat Trailer with 5.30 x 12 tires on 4 Lug Wheels
- Q&A: How to Measure a Trailer Wheel Pilot Hole to Choose a Replacement Center Cap
- Search Results: trailer light relay
- Video: Curt Ball Mounts - Fixed Ball Mount - C45014 Review
- Video: Brophy Ball Mounts - Fixed Ball Mount - BM96 Review