Command LED Trailer Tail Light Installation Video

That sounds right to me Travis, but while you have everything pulled out it wouldn't hurt to re-measure and double-check. The height shouldn't have changed and everything should essentially go as you've described, but If it…

Hey Jeremy, unfortunately the Reese 58351 lift tool is no longer available by itself. We used to carry them, but we sold our last one back in 2019. We do have some other similar lift tools available which may be suitable substitutes. The link below…

Sounds like you are wanting to know if the Fan-Tastic Vent 3350 Series Upgrade Kit #FV803358 is the correct kit for your roof vent. Basically this is designed to fit the Fan-Tastic Roof Vents to turn it into a 3350 series of Fan-Tastic Vents like…

The Mighty Cord Replacement Hardwire RV Plug part #A10-P30VP is about 4" long x 2-1/2" wide x 2-1/4" thick. This should fit inside your power cord hatch but you will need to measure to be certain.

The matching passenger side tail light for the Command #328-003-81LBM1 is part #328-003-81BM1.

The license plate light on the bottom of the LED Trailer Tail Light with License Plate Bracket #328-003-81LBM1 that you referenced is clear incandescent bulb.

You could certainly reverse the position of the lamps by installing the #328-003-81LBM1 lamp on the passenger side and the #328-003-81BM1 lamp on the driver's side. Both lamps wire the same way, the white wire is the ground connection, the red is…

Yes, it can. The Equal-i-zer Weight Dist Shank item #EQ90-02-4500 will work with a Equalizer E2 weight distribution system.

The Mighty Cord Replacement Hardwire RV Plug, part #A10-P30VP, can be used outdoors but this plug can not be exposed directly to the elements since it is not 100% waterproof. As long as there is a door or other form of protection on the power outlet…

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

The Equal-i-zer Weight Dist Shank part #EQ90-02-4500 measures 14" from the center of the hitch pin to the center of the adjustment holes and is typically what we recommend for more tailgate clearance with a weight distribution system. It's…

I confirmed with Progressive Dynamics that the replacement part you need is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V.