bing tracking image
  1. Trailer Lights
  2. Optronics
  3. Tail Lights
  4. Rectangle
  5. LED Light
  6. Red
ONE LED RV Combination Tail Light w/ Mounting Bracket - 4 Function - 1 Diode - Driver Side

ONE LED RV Combination Tail Light w/ Mounting Bracket - 4 Function - 1 Diode - Driver Side

Retail:$27.83
Our Price: $21.40
You Save: 23%
Trailer Lights
Shipping Weight: 0.62 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
8-5/8" x 3-3/16" Rectangle. RV light serves 4 functions: brake, tail, turn, and license plate light. ONE Series provides bright light using fewer diodes than other LEDs. Surface mount with built-in license plate bracket. 3-Wire pigtail. Great Prices for the best trailer lights from Optronics. ONE LED RV Combination Tail Light w/ Mounting Bracket - 4 Function - 1 Diode - Driver Side part number RVSTL0061 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (903)
  • Q & A (0)
  • Photos

Optronics Trailer Lights

  • Tail Lights
  • Rectangle
  • LED Light
  • Red
  • 8-5/8L x 3-3/16W Inch
  • Surface Mount
  • License Plate
  • Stop/Turn/Tail
  • Non-Submersible Lights
  • Optronics

8-5/8" x 3-3/16" Rectangle. RV light serves 4 functions: brake, tail, turn, and license plate light. ONE Series provides bright light using fewer diodes than other LEDs. Surface mount with built-in license plate bracket. 3-Wire pigtail.


Features:

  • Rectangular RV tail light serves 4 functions
    • Stop light, tail light, turn signal light, and license plate light
    • Built-in license plate bracket allows easy mounting of license plate
  • ONE Series provides bright light using fewer diodes than other LED lights
  • Durable surface-mount technology (SMT) construction of LED circuit board
    • Better withstands shock and vibration
    • Allows for improved heat distribution
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Durable white ABS plastic base
  • Red acrylic lens can be easily replaced
  • Clear lens for license plate light
  • Mounts on surface of trailer - hardware not included
  • 3-Wire pigtail
    • White wire for ground
    • Black wire for tail light
    • Green wire for stop/turn signal light
  • DOT compliant
    • Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting


Specs:

  • Configuration: driver's side (left-hand side)
    • Passenger's-side light (RVSTL0060) sold separately
  • Light dimensions: 8-5/8" long x 3-3/16" tall x 2-1/4" deep
  • Height with license plate bracket: 5"
  • Power draw at 12.8 volts:
    • Stop/turn signal light: 0.34 amps
    • Tail light: 0.094 amps
  • Quantity: 1
  • Lifetime warranty on LEDs


Optronics RVSTL0061 Series ONE LED RV Combination Tail Light Dimensions



RVSTL0061 Optronics ONE Series Combination LED Camper Taillight w/ License Plate Illuminator and Bracket - Left Side - Red Lens - White Base

Item # RVSTL0061




California residents: click here


Customer Satisfaction Score:


Customer Reviews

ONE LED RV Combination Tail Light w/ Mounting Bracket - 4 Function - 1 Diode - Driver Side - RVSTL0061

Average Customer Rating:  4.8 out of 5 stars   (902 Customer Reviews)

8-5/8" x 3-3/16" Rectangle. RV light serves 4 functions: brake, tail, turn, and license plate light. ONE Series provides bright light using fewer diodes than other LEDs. Surface mount with built-in license plate bracket. 3-Wire pigtail.

by:

Great company to work with. Excellent inventory, customer service was amazing. I called and spoke to Alex and she was very pleasant to talk to. Plenty of installation videos available. As a RV park owner I am sure I will be using them again in the future.



by:

So i have a 94 Jayco pop up that one of the tail lights got smashed. The company that made those lights is no longer around. After some searching on etrailer.com I decided on these LED lights. Price was right. My only real complaint is that these lights come with nothing. No screws, no instructions, no seals. So when I pulled my old lights and found that they had 4 wires and these lights had 3, time to do some research. None of the wire colors matched up. Not the trailer wires, not the old lights etc. On etrailer there is a video describing the lights in detail. Watch it. He goes over what color wire does what on the new light. I hooked the trailer up to the car to figure out the old lights wiring scheme. I was able to figure it out from there, though you cannot wire both sides up the same, if you do when you put the turn singles on they both flash. I had to leave the brake light wire disconnected on one side. Brake lights still work without it. I used plumbers putty to create a seal. That is also what they used on the originals and I used the original screws to make new holes and mount the lights. All in all it worked out but instructions would have been greatly appreciated!. I am sure etrailer would have jumped in to assist if I asked but it was not needed. Pictures posted. Old lights on bumper for reference.



by:

I received the tail lights I needed today, they are exactly what I wanted and appear to be good quality. This was my first time using etrailer.com, it was a very good experience, the items were shipped and received sooner than I expected. I would recommend etrailer as a good source for trailer parts etc.



by:

As always etrailer was there for me when I needed an item for my travel trailer. It's good to know you guys always have the right product for me.
Thanks guys

Ron

1/23/2020

Great product replacement



by:

I bought these to add on to my existing trailer lights so they would be easily visable above the extras loaded on the rear platform, and so my license plate would not be partially obscured (a violation in many states).
They are just as bright as the original equipment, if not brighter. The only criticism I have is the wiring does not follow the standard color code, so brown to brown etc. did not work. It was easy enough to fix, so wire it then test before you make final connections and seal it up.



by:

We accidentally broke the license tag bracket on our camper and needed to replace the entire tail light assembly. An internet search led me to a replacement unit that exactly matched the one on our pop-up, which was available from etrailer.com. Since the replacement light was LED, we replaced the tail light assembly on both sides. Since the screw holes exactly matched, no modification was required, and the installation took about 30 minutes.



by:

Bought a year ago, and still working great! Lights are brighter than the regular bulb from previous. I did silicone caulk the license plate brackets in places that it broke for me previous. Am hoping this provides extra "structure" to fortify the strength of it.



by:

Needed to replace my camper's tail lights (corroded lamp sockets & cracking housings). Removed the old lights and easily installed the new LED lights. I"m happy with the sturdy construction and bright lights. The only issue was the wiring convention didn't line up with my Forest River camper. I had to switch the tail light and stop light wires.



by:

The overall quality of these lights is very good. My only negative experience is regarding installation and the wiring colors. I assumed the white, green, and black wires conformed to what I believe is a wiring standard and much to my dismay, when I hooked everything up for a test, the light function was reversed (turn/brake light illuminated when parking lights should be on, and vice versa). Once I switched the green and black wires everything started working as it should. Since there was no instruction sheet or specification related to wire colors, there was no documentation for me to refer to.



by:

Great product, easy to install and wire up, works great. Odelia was great also, very helpful, friendly, and professional. Great job etrailer, thanks.

Steve S.

3/15/2021

Still performing well, been through many camping trips and the recent bad freeze here in Texas.



by:

arrived on time and easy to install.



by:

An easy to install exact replacement for the tail light on my camper.

Pooneil

6/11/2020

Product has continued to perform as expected.



by:

Exact replacement. easy install. Shipping was super fast.



by:

I used the Optronics LED lights to replace the old dim lights on my wife's vintage trailer. They were easy to install and are nice and bright.



by:

Great service,fast shipping. Would recommend to everyone. Now I'll have led lights on my travel trailer. Looked every where for the same low profile lights I have and you had them.



by:

Converting my trailer lights to LED works is they should very bright !!



by:

Glad I found this website. I needed replacement tail lights and eTrailer was the go-to company. Great customer attention and amazing products delivered in a timely manner.



by:

Work great,easy upgrade to my old lights , Could not keep the bulbs in the socket of the old one.
Don't have to worry about that with these



by:

Light bright and functional. (lense clip broke on passenger side light)



by:

Exactly what I expected, quality = cost, timely shipment "without a hitch". Now to see if the trailer lights work.....



by:

Found just I was looking for, website is great. My order shipped sooner than I expected and I had it in 3 days. Great service again from etrailer, I will be back.



by:

Replaced original tail lights with these LED's nice and bright easy install



by:

The price was certainly right but it took 3 weeks to get the part. We had to buy a light somewhere else for twice the amount of money!



by:

I would like to take this time to let you know that I appreciated your very quick service as well as your excellent products. Thanks again and I will be letting my friends know about you in the future.
Thanks again,
Ed



by:

Quality build and an excellent upgrade to the stock incandescent unit. A direct replacement.


25
790
Show More Reviews

See what our Experts say about this Optronics Trailer Lights

  • Needing a Replacement Taillight Cover for a 1998 Jayco Eagle Popup Camper
    I found an answer to your question, unfortunately there are no direct replacement lenses for the Wesbar lights on your 1998 Jayco Eagle. The lenses have been discontinued and are no longer available. However, we do carry new taillight assemblies that can replace the OEM lights on your camper. Bargman Trailer Tail Light - Stop, Tail, Turn, and License Red Lens # 30-92-003 and the Bargman Surface Mount Tail Light - Red # 30-92-001 will fit on our camper. These light assemblies will function...
    view full answer...
  • Comparing Optronics Trailer Tail Lights RVSTL61 and RVSTL0061
    Trailer tail light # RVSTL0061 is a ONE series light meaning it has less electrical components so it draws less power. It has a built-in reflex to help make it brighter. And it is pretty bright. Take a look at the video I have linked on it. But the regular version, # RVSTL61, will be as bright since it uses more LEDs. They are so close in brightness, as you can see in the videos, that it is a tough call. I think you would be happy with the less expensive version, # RVSTL0061.
    view full answer...
  • Recommendation for LED Taillight Replacement for Taillight 30-92-003
    There isn't an exact LED replacement for the taillight style of the # 30-92-003 but the part # RVSTL0061 is a very similar setup that is LED. For the passenger side (means without license plate bracket) we have the part # RVSTL0060.
    view full answer...
  • Why Isn't There Replacement LED for Optronics Taillight # RVSTL0061
    If the LED of the Optronics taillight # RVSTL0061 was to burn out you'd want to just replace the entire unit. The bulb/light is not replaceable in this but also even if it was replacement LED bulbs are about the same cost as this so even if it was replaceable you'd still be better off just replacing the whole thing. LED lights like this are typically rated for 50,000 hours.
    view full answer...
  • How to Install a Three Wire Trailer Light
    It sounds like your current lights with 2 wires ground to the trailer by the mounting hardware. The One LED RV Passenger Tail Light # RVSTL0060 has three wires, the white wire is the ground, the black wire is the taillight and the green wire is for your stop lights and turn signals. To hook up your lights you will need to splice together the taillight and stop/turn wires. Then you will need to take the white wire and ground it to the trailer itself. To ground your wire you will want to...
    view full answer...
  • LED Tail Light To Replace Optronics RVSTB60
    The RV Tail Light - Stop, Tail, Turn - Rectangle - Red Lens part # RVSTB60 in LED is Optronics LED RV Combination Tail Light w/ Mounting Bracket - 4 Function - 1 Diode - Driver Side part # RVSTL0061 and passenger side part # RVSTL0060. This particular LED light measures 8-5/8" x 3-3/16" which is the same as the incandescent RVSTB60 light. The great thing about LED lights is they last much longer and draw less power than the incandescent options.
    view full answer...
  • Why Would Trailer Taillight Not Blink When Running Lights are On
    That's either a weak ground (probably not case since it's an LED light) or you have the running lights and the stop/turn circuits backwards which you can test by seeing if the running lights are brighter than the stoplights.
    view full answer...
  • Replacement Tail Light Solution for 1998 Jayco Eagle
    found an answer to your question, unfortunately there are no direct replacement for your 1998 Jayco Eagle. The lenses have been discontinued and are no longer available. However, we do carry new taillight assemblies that can replace the OEM lights on your camper. Bargman Trailer Tail Light - Stop, Tail, Turn, and License Red Lens # 30-92-003 and the Bargman Surface Mount Tail Light - Red # 30-92-001 will fit on our camper. These light assemblies will function as tail, stop, turn signals....
    view full answer...

Do you have a question about this Trailer Light?


Info for this part was:

Employee Leah B
Edited by:
Leah B
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B
Employee Amy B
Written by:
Amy B
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T
Employee Noah M
Updated by:
Noah M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.