Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
8-11/16" x 3-7/8" Rectangle. LED Trailer light with 22 diodes provides stop, turn, and tail light function. Durable black polycarbonate base. Surface mounts to passenger side of trailer - hardware not included. 3-Wire pigtail.
Features:
Specs:
Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
Average Customer Rating: 4.7 out of 5 stars (98 Customer Reviews)
8-11/16" x 3-7/8" Rectangle. LED Trailer light with 22 diodes provides stop, turn, and tail light function. Durable black polycarbonate base. Surface mounts to passenger side of trailer - hardware not included. 3-Wire pigtail.I have not yet installed these lights but they seem to be exactly what I needed to replace my current OEM for my White Hawlk Camper. Look almost the same just LED. When the rightnlight came in, it was broken . I am so impress at etrailers customer service.They had another one shipped immediately after call them. They wanted to fix the issue as quick as I wanted it too. It's hard to find such good customer service.
These are great lights! We had to mess with the old wiring to get everything to work right, but my trailer is a 1993, so it had some other stuff going on as well. The lights are bright and perfect for the coleman camper I have.
One of my new trailer tailights didn't work properly. I had waited about a month to install, but etrailer still offered to send a replacement. It works great. Thanks for the help and support!!
Service was swift and appreciated
The product was as I thought it would be
LED lights will be more visible, therefore making for a safer ride, and more modern looking, updating our trailer’s value
Easy install and the LED lights are much brighter than the old ones.
The lock washers are junk. Have to retighten after two hours on the road. Have changed to a better lock washer and will try that. Next is step up to Nylok’s.
Order came faster then I anticipated th anks
Plastic base could be built more sturdy. Seems a little flimsy and definitely made overseas. One of the plastic pieces that hold the light cover on broke off while putting it on. To fix it, I would have to order a whole new light with the base and rewire it. I just used a little glue, because I did not want to wait for shipping or seal with a return and replace. But the lights look and work great otherwise!
LED lights are nice and bright and safe!
I've had these tail lights installed for about a year. They are much improved over the original tail lights. They are plenty bright and I haven't had any issues with them. They were easy to install and I sealed around them with caulking.
A great upgrade! Much brighter than my old bulb style. I used butt connectors and connected my white wire to led white, green to led black, and black to led red, and it worked!
Gwen with etrailer was the Epitone of what customer service should be! The lights arrived right to my doorstep as promised and the quality is second to none! Of course this the why I will continue to shop etrailer
Ray
11/3/2020
Just as excited today as I was when I installed the LED lights a year ago! Would not hesitate to recommend or purchase again!
Order went smooth. Product exactly as described. Fit looks perfect to the lights I am replacing.
I purchased LED Tail, signal lights, LED red and orange marker lights and a door stay (holder) the led lights are great , I would say are easily 3 times brighter than the original filament bulbs and I doubt I will have to replace the in the far away future, my door stays open now also I could not be Happier, Thank you, Happy Camper!!!
Just received the lights and will be installing this week. They arrived in great condition and well packaged. These are replacements for original Bargeman lights on my 21 yr old trailer and will complete my update to all led lighting. Noted that license plate light is not led and at the price of these lights it should have been. I have a led bulb that will fit and I’ll make that changeover. Otherwise these look exactly like my current lights and should be a quick change and provide much better lighting. Thanks etrailer for a nice product and fast service.
I replaced the stock taillights on my 2017 Jayco travel trailer with these LEDs. It was hard to see the stock taillights during the daytime. I always worried people wouldn't see my brake lights and run into the back of the camper.
These new LED taillights are about 3 times brighter than the old ones. When you use your turn signals or tap your brakes, people behind you can't help but see them! At night I can actually see the red glow behind me when I touch my brakes. They are also very easy to install.
I highly recommend these for anyone pulling any sort of RV or trailer.
Easy to install and a perfect fit. So far after 1 year no issues at all
Very disappointed and misled. I purchased a left and right LED RV surface mount tail light. The left tail license plate light was not a true LED tail light. The license plate lamp portion was a standard automotive filament bulb and not an LED. I purchased this item specifically for the reliability of LED technology. If you want a true LED RV tail/license plate light, look elsewhere. Definitely would not recommend.
Converted my RV from incandescent to LED lights from Etrailer and as other reviewers have reported the difference is like night (incandescent) and day (LED)! I’ve been dealing with Etrailer for many years and each experience is fantastic. They’re number one from correct parts, quality parts, expedient delivery, to friendly staff.
Purchased to replace taillights on an old Pop-Up. Easy to install. I used solder and shrink tubing. Quality is OK for all plastic housing. Time will tell on durability but for now everything looks good.
I was replacing my original Command Electronics tail lights with their LED version. All went well but I did need to reroute the wires in the new lights through some other hole/slot in the back of the light unit since they came out toward the left side rather than the middle of the unit. They look and work great.
Etrailer is a very good place to buy your trailer parts. Everything I bought from them so far has been quality. The only thing I was disappointed in was how long it took to get the stuff I ordered (but it was free shipping so I shouldn't complain)
Very well made product. No instructions included but that should not be as big an issue as there are great tutorials on your web page. I'm very satisfied with these new tail lights.
INSTALLED EASY. USING OLD DRILL TIP SCREWS MADE NEW MOUNTING HOLES.
NICE AND BRIGHT NOW.
2018 G/D REFLECTION 295RL
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gary
4/17/2023
Great!