Low Profile RV Combination Tail Light w/ Mounting Bracket - 4 Function - 9 DIodes - Driver Side
(95 reviews)
Price: $30.12
In Stock
Low Profile RV Combination Tail Light w/ Mounting Bracket - 4 Function - 9 DIodes - Driver Side
Item # RVSTL61
Our Price: $30.12
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (95)
- Q & A (0)
- Photos
Optronics Trailer Lights - RVSTL61
- Tail Lights
- Rectangle
- LED Light
- Red
- 8-11/16L x 3-3/16W Inch
- Surface Mount
- License Plate
- Rear Reflector
- Stop/Turn/Tail
- Non-Submersible Lights
- Optronics
8-11/16" x 3-3/16" Rectangle. Low-profile RV combination tail light light serves 4 functions: brake, tail, turn, and license plate light. Mounts on surface of trailer with built-in license plate bracket. 3-Wire pigtail.
Features:
- Low-profile RV tail light serves 4 functions
- Stop light, tail light, turn signal light, and license plate light
- Built-in license plate bracket allows easy mounting of license plate
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable white ABS plastic base
- Red acrylic lens can be easily replaced
- Clear lens for license plate light
- Mounts on surface of trailer - hardware not included
- 3-Wire pigtail
- White wire for ground
- Black wire for tail light
- Green wire for stop/turn signal light
- DOT compliant
- Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting
Specs:
- Configuration: driver's side (left-hand side)
- Passenger's-side light (RVSTL60) sold separately
- Light dimensions: 8-11/16" long x 3-3/16" wide x 2-1/8" deep
- Height with license plate bracket: 5"
- Diodes: 9
- Power draw at 12.8 V:
- Stop/turn signal light: 0.243 amps
- Tail light: 0.046 amps
- Quantity: 1
- Lifetime warranty on LEDs
RVSTL61 Optronics Low Profile Combination LED Camper Taillight w/ License Plate Illuminator and Bracket - Left Side - Red Lens - White Base
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Low Profile RV Combination Tail Light w/ Mounting Bracket - 4 Function - 9 DIodes - Driver Side - RVSTL61
Average Customer Rating: 4.8 out of 5 stars (95 Customer Reviews)
8-11/16" x 3-3/16" Rectangle. Low-profile RV combination tail light light serves 4 functions: brake, tail, turn, and license plate light. Mounts on surface of trailer with built-in license plate bracket. 3-Wire pigtail.by: Brian09/01/2022
Well I went to install my drive's side light with license plate holder and found out that both lights sent to me are the same driver's side light, lucky for me because one of them was broken.
As for the other items I haven't installed them yet but at least the appear to be the correct item and not broken.
by: Pat B.03/23/2017
These were an exact replacement from the originial incandescents and have performed flawlessly. I bought both with the license plate bracket, and the separate LED for the license plate makes a huge difference. One unintended benefit from them is that they really light up the ground at night and is really beneficial when backing into a site at night. No complaints!
by: James G.02/16/2015
These new Optronics LED rear trailer lights work great. They are super bright and very low current draw. Voltage at the rear of my 30 foot trailer was 10.5 volts with incandescent bulbs. With LED's, it's up around 12 volts where it should be.
by: Jaime 09/09/2023
Haven't had the opportunity to install the tail light yet.
by: Paul Y04/23/2017
These LED lights are a great improvement from the originals. I'm a big fan of LEDs I replace them in everything I have if I can. much safer .
I all so installed a LED light strip, like the ones you would install under the tail gate on a pick up. with Back ups, Tail & Turn.
These Optronics light are a little smaller in size, you do have to silicon over the old holes before installing.
by: Robert05/12/2023
Good except the tabs that the cover snaps into were broken, I had to attach it with screws since I am leaving soon and knew I wouldn't be able to get a replacement quickly enough.
by: Michael09/05/2022
I bought these LED tail lights to replace the incandescent Bergman lights that were original on my 1999 pop-up. I was hoping for much brighter light than the old incandescent tail lights. These are brighter than incandescent, but not as bright as I had hoped. Still, it is an improvement. See the videos for how they function (LED on the left, incandescent on the right). Installing them wasn’t too bad, although they did have a different hole configuration than my old Bergman lights. So I had to do some drilling and get some banana peel rivets. I also needed to drill a hole through the taillight back plate on the right side to get it to line up with the wiring hole on my camper. The color of the wiring was also reversed from what was on my camper. A little clear silicone to fill the old holes, and I’m all set.
Review for the Low Profile RV Combination Tail Light w/ Mounting Bracket - 4 Function - 9 Diodes, #RVSTL61
by: James 08/22/2023
Works perfectly. Easy to install.
by: Nick 05/05/2023
Great upgrade for my 1999 Jayco Eagle. Easy installation.
by: James W08/19/2016
Replaced both tail light with these lights. Went on easy, fit right where the old ones were mounted, wiring was no problem. These are a lot brighter, I hope people can see these a lot better than the old incandescent lamps.
Price was reasonable and shipping came right when you said it would arrive.
James W.
8/25/2017
Still working and looking good.
by: Steve S.06/14/2017
Cracked lens on the OEM tail light, I took the opportunity to change them out to LED. This model substantially fit the footprint of the OEM units. I have found them to have good daylight brightness, and as LED's do, they "pop" when they turn on or off. Back and forth through Atlanta and Nashville a few times already this spring in daytime traffic, it appeared that my lane changing intentions were clearly visible as I always received consideration when I signaled. And the best part; I needed them just as I was departing on a trip. Ended up I was going right by etrailer.com so they held them at the will-call counter for me. Couldn't have been easier!
And when you need electric brake stuff for your trailer, upgrade to the self-adjusting type and be happy with better brakes than you're probably used to.
by: Karen05/25/2016
I ordered LED tail lights for an old trailer that needed a brighter brake light. No problem with the order or installing the lights. I have since purchased a drop-down trailer hitch from etrailer. I'm very pleased with the products. I love the videos on the etrailer website which give me a more accurate view of the product than what I can see in just a photo; and the audio instructions/review are very helpful.
by: Jeff C.09/14/2015
I was growing weary of the incandescent bulbs on my trailer taillights coming loose, and losing the lens in one provided the perfect excuse to replace both with LED. The website was excellent, and the videos were very helpful and an unexpected treat.
Initially I was irritated when the order showed up with 1 LED and 1 incandescent. I called customer service and they rushed a replacement LED right away, which is all I can ask for.
I installed them this weekend and they look great - much brighter than the old bulbs. I haven't road-tested them yet, but don't see why I'd have any trouble. The mounting holes weren't an exact match to my old ones, darn it, but installation was a breeze.
by: Gary 07/21/2023
Ordering was easy and delivery was quic k.
by: Terry G06/16/2021
This was an exact replacement for the OEM tail lights on my KZ Spree travel trailer. The replacement process was very straight forward. These tail lights are much brighter than the originals, and the LEDs should last the life of the RV without the aggravating and unpredictable bulb replacement needed by the older type.
The website product description was perfectly accurate. Communication was excellent. This has also been my experience with etrailer on previous orders.
by: Dave06/11/2015
Upgraded standard tail lights on camper trailer to LED taillights. Had to drill new holes to mount as they are close but not and exact replica of what was on the trailer. Lights are 100 times better than the original. Even the driver side light has a separate LED to illuminate your license plate. Worth the money and 30 minutes to install. LED's are brighter especially during the day. Turn and brake lights are more definitive than standard tail lights. I upgrade to LED on every trailer we have owned.
by: Paul K.05/30/2015
I recently came into a 12' popup trailer, and upon bringing it home I realized that the rear light plastic had decayed to the point where it was falling apart.
I found etrailer.com and fell in love with their well-made website, with it's massive lighting collection that was well curated and organized. It was clear to me that the people at etrailer.com are really passionate about trailer lighting! The videos of each product were awesome and really helped me figure out what I wanted to get. The lights came exactly as promised and were easy to install.
Will highly recommend!
by: Todd 05/18/2023
Light works great. Was easy to install.
by: Dave. B.03/30/2015
The trailer drivers side tail light license plate replacement was easy to install with written instructions and also on line video. The new LED lights are bright and a big improvement over the standard bulb in the old lens.
by: Kevin04/03/2017
These lights are an excellent upgrade for my pop-up camper. I highly recommend them over incandescents for replacement of old faded tail lights.
by: Tony Z06/27/2017
Easy to order. Arrived sooner than I thought and the product was exactly as shown. WIll definitely order from etrailer again.
Tony Z.
6/29/2018
The product has been working wonderfully. Much better than the old bulbs. Good product I would recommend.
by: Tony04/08/2020
One year of use, and they are still working well. Direct replacement for the OEM lights on our 2013 Forest River Rockwood trailer. Much brighter than the incandescent fixtures they replaced.
by: Tara05/29/2016
They are bit smaller then my lights I have on traveling trailer. Can't see behind a traveling trailer and they worked great. Very bright behind the trailer and that's what I wanted. No need to replace bulbs and no bulb coming lose were it came off and on. They are very $ for one bulb but I think its worth it.
by: CL08/20/2019
After bulb changes, rewiring and much frustration, I decided to go with a new approach. Turns out, the entire light needed replaced. Worked so well, I got another for the other side. Lights up very well behind you at night for easy vision when backing up.
25
95
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Are Extra Steps Needed When Converting Incandescent Trailer Lighting to LEDWhen converting a trailer from incandescent lights to LEDs it's just a straight replacement. There's no extra steps or load resistors needed like when you do the same conversion on a vehicle. You'd just wire the # RVSTL61 in place of your current lighting exactly as it currently is and you'd be set! I attached an install video for this kit for you to check out as well.
view full answer... - Replacement Lens and Housing for 1991 Winnebago Micro Mini WarriorPlease look at the Low Profile RV Combination Tail Light w/ Mounting Bracket, # RVSTL61 and the RV Tail Light - Stop, Tail, Turn, License Plate - Black Base, # RVSTB61. Most all OEM's use the same venders for many of the parts on the coach they build on cutaway chassis, such as your 1991 Toyota Motorhome Chassis. The part numbers you provided did not pull anything up on our end but we should be able to locate something that will allow a retro fit unless you want an original factory install...
view full answer... - Troubleshooting License Plate Light Not Working with New Optronics Tail Light Assembly On the Optronics Low Profile RV Tail Light # RVSTL61 the black wire is for the tail/running lights and the green wire is for the stop/turn signal lights. The white wire as you mentioned just needs to be grounded to the trailer frame. With this in mind it sounds like you just have the wires crossed on the light assembly. You will want to connect the green wire from the Optronics light to the red wire on your trailer. The black wire from the light will go to the green light on the trailer....
view full answer... - Upgrading Incandescent Tail Lights on 1991 Terry Resort to LED Lights with 3-Wire DesignI recommend the Optronics Low Profile RV Combination Tail Lights # RVSTL61 and # RVSTL60 to replace the old incandescent lights. These are LED like you wanted and match the dimensions of your existing tail lights (8-1/2" x 3") making them a perfect replacement. I recommend upgrading your clearance lights to LED as well to maintain an even amperage draw since LED lights draw only a fraction of the amperage when compared to incandescent. I have attached a link to our selection that will...
view full answer...
- Replacement Lens for Tail Lights on a 1999 Jayco Eagle Pop-Up CamperIf by tail light cover you mean a replacement lens then we do have a wide selection of these so there is a chance we may have what you need but I don't have any sort of parts breakdown sheet for a 1999 Jayco Eagle Pop-Up Camper so in order to see if we have have the correct replacement lens I would need both photos and measurements of the light you need a replacement lens for. With that being said, it is going to be much easier to just replace then entire light rather than looking for...
view full answer... - LED and Incandescent Trailer Tail Lights with License Plate BracketFor an LED trailer tail light with license plate bracket we have # RVSTL61 and # RVSTLB61. For incandescent we have the following: # 30-92-003 # RVST56 # 30-92-108 # 30-92-004 # 30-92-109 # RVST61 # RVSTB61
view full answer... - Recommendation for Changing Incandescent Tail Lights to LED on a 1995 TrailerAll of our 1157 bulbs, LED or incandescent, have retaining tabs that are rotated 90 degrees from the contacts. We do not offer any bulbs where the contact and tabs are inline with each other. My recommendation would be to replace your tail lights with LED tail lights like part # RVSTL60 (right hand) and # RVSTL61 (left hand). These are fairly inexpensive LED tail lights that provide brake light, turn signal and tail light and license plate light functions.
view full answer... - LED Tail Light Recommendations for a 1998 Jayco Eagle Pop-Up CamperThe Wesbar light # 271594 hangs on studs so it would not work in place of the lights on your Jayco trailer but I do have another recommendation. Take a look at light # RVSTL61 for the left and # RVSTL60 for the right. These lights have mounting holes that are space 7-3/8 inches apart on center side to side and 2 inches on center top to bottom. If the lights you have now have the same mounting pattern these can be used though they do not have the same dimensions as the old lights.
view full answer...
- Replacement Tail Light Lens For Left Side Of A 2018 Grand Design MomentumI may have an option but unfortunately since trailer manufacturers don't always keep the best logs of what small parts are installed on a specific trailer, we do not have any way to confirm the correct replacement lens for your 2018 Grand Design Momentum. The Replacement Tail Light Lens # AST61B you were looking at is designed to fit on the # RVSTL61 and # RVST61 tail lights and measures 8 5/8" long and 3 3/16" tall. To confirm the fit you will need to measure your current tail lights,...
view full answer... - Determining Correct Replacement Lights For Older Optronics Lights On TrailerThanks for the picture! I reached out to my contact at Optronics and the lights in your pictures have been discontinued. The closest replacement option currently available is the Low Profile RV Combination Tail Light - Stop, Tail, Turn - 9 Diodes - Passenger Side # RVSTL60 and Driver Side # RVSTL61 which my contact mentioned will likely fit, but you will need may need to drill new mounting holes in the bracket on the trailer. I included installation videos for both of the products mentioned...
view full answer...
- Adding a 2nd Set of Tail Lights to a Keystone Outback 274BWe have everything that you will need to make something work, but we do not have a kit that was designed for this specific purpose. The factory tail lights that come on the Keystone Outback 274RB do not appear to be LED and we do not carry an LED version of them, so your second set of tail lights may not match the original set. If I were doing this on my trailer, I would want to choose lights that match the existing tail lights as much as possible. Something like the Optronics Low Profile...
view full answer... - Lens Cover for Optronics Tail Light RVSTL61The tail light that has the clear lens on the bottom for lighting up the license plate is Tail Light # RVSTL61. If this is the tail light you have the correct replacement lens is # AST61B. You can see the clear lens on the bottom for the license plate light in the accompanying photo.
view full answer...
- Taillight Housing Adapter for 1977 Shasta Travel TrailerThose are going to be a taillight adapter that was most likely produced solely by Shasta for your camper. It's primary purpose is to give the taillights a better mounting surface and place to conceal the wiring. It is similar to the Wedge Mounting Base # RV60BK that we carry for the Optronics Tail Light # RVSTL60 and RVSTL61. You may have to find those exact parts either through someone who provides restoration parts for older campers or a salvage yard that parts out RV's.
view full answer... - Tail Light Back Clip Replacement for RVSTLB60The only replacement part available for these lights are the replacement lens and not the black back plate with clips for the Optronics Low Profile lights, so your best solution is to replace whole light. For LED lights you need # RVSTLB60 (passenger side) or # RVSTLB61 (driver's side). For Incandescent lights use # RVSTL60 (passenger) or # RVSTL61 (driver).
view full answer... - Replacement Tail Lights For a 2000 Dutchmen Aerolite F16 Cub Travel Trailer CamperI do have a recommendation as it appears the tail lights on your 2000 Dutchmen Aerolite F16 cub travel trailer we no longer carry. You can replace the entire tail light assemblies with the Driver Side # RVSTL61 and Passenger Side # RVSTL60 lights. Then we have the Replacement Lens # AST61B which will fit either light if one should become damaged in the future.
view full answer... - Replacing Bargman AILRST 94 Tail Lights with LED Assemblies on TrailerBased on the number you provided, it sounds like you have the Bargman 92/94 series taillight. These assemblies have dimensions of 8-9/16 inches long, 4-9/16 inches wide and 2-1/8 inches thick. I recommend verifying these measurements on your existing unit. There is not a direct LED replacement assembly for these tail lights, but we do have some options that have similar dimensions. I recommend looking at the Optronics Low Profile RV Tail Light # RVSTL60 for the passenger side and # RVSTL61...
view full answer... - Replacement Lens for Optronics # RVSTL61We do indeed offer a replacement lens for the # RVSTL61. The part number for the lens is # AST61B. The lens for the passenger side is # AST60B.
view full answer... - Can Wedge Mounting Base for Optronics RV Tail Lights Be Mounted Upside DownYes, the Wedge Mounting Base # RV60BBK can be mounted upside down if that is what you need to properly fit the lights on your trailer. This is designed to fit # RVSTL60 and # RVSTL61 series lights.
view full answer... - LED Trailer Taillights for 1984 Scotty Travel TrailerI have some light options for you, but the RV Tail Light, Stop, Tail, Turn, License Plate # 30-92-003 that you referenced does not come available as a kit with LED bulbs. We have a couple of options for similarly sized trailer taillights with LEDs, but not exactly the same size as the # 30-92-003. The Optronics Low Profile RV Tail Light # RVSTL60 will offer stop, turn, and tail for your 1984 Scotty. The corresponding taillight that includes the license plate light is # RVSTL61. I've attached...
view full answer... - Availability of LED Replacement Light for Bargman Incandescent Light # 30-92-108My contact at Bargman confirmed that there is no direct replacement LED version of their surface-mount Tail Light with License Plate Light, part # 30-92-108. I did find a product from Optronics that uses LEDs, is of the same general size and shape, and which does include a license plate lamp. This is their part # RVSTL61. The passenger-side version is # RVSTL60.
view full answer... - Should I Replace My RV Tail Light?Definitely just replace them, simply because the product will start rusting and next you may have electrical issues in the future. The RV Tail Light # 30-92-003 have a 1-Year warranty. Or if you would like a LED upgrade I recommend # RVSTLB61 and # RVSTLB60. Or the white base version # RVSTL61 and # RVSTL60.
view full answer... - Passenger Side Trailer Tail Light that Goes with Optronics Light # RVSTL61Yes, the passenger side mate is # RVSTL60. It does not have the license plate mounting bracket or the license plate light at the bottom. Both lights are LEDs and have stop/tail/turn light functions.
view full answer... - Largest LED Trailer Tail Light with License Frame Light AvailableThe largest LED tail lights we have that have the license plate light are # RVSTL61, in white, and # RVSTLB61, in black. They both measure 8-11/16 by 3-3/16 inches. These are both for the driver's side, the corresponding passenger side lights to these two are the # RVSTL60(white) and # RVSTLB60(black). These two are slightly larger than the # RVSTLB0061 which is 8-5/8 by 3-3/16 inches.
view full answer... - Recommended LED Trailer Lights To Replace Incandescent LightsIf you are wanting to go from incandescent lights to LED lights, I recommend the Optronics Low Profile Combination Light like part # RVSTLB61 for the driver side and part # RVSTLB60 for the passenger side. These lights have similar but not exact measurements as the Bargman lights, part # 30-92-003 you said you have. The Optronics lights measure 8-11/16 inches long, 3-3/16 inches tall and 2-1/8 inches deep. They are about 1/4 inch longer and about an inch more narrow than the Bargman lights....
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Written by:
Tricia G
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Brian T
Video Edited:
Dustin K
Installed by:
Hayden R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
9/19/2022
oh no! I am sorry that we shipped the wrong light. Customer service will reach out to you.