CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE10161GA-2 Review Video

Oddly enough I can't find a decent u-bolt that we carry that would work well for your application.

I have a solution for you but the part #CE10190GA-4 is not available in a half kit so what you would want is the part #CE10190GA with the swivel bracket part #CE10206G. We don't have the bolt and nut though so you would need to supply that…

I reached out to the manufacturer, Ark, and there is not a weight capacity for the Ark Ezi-Guides Self-Aligning Boat Trailer Loading System #AR84FR. Instead, they said it was simply rated for boats that range from 20' to 28' long. As for the…

Based on the picture you submitted it looks like your trailer was originally intended for a different boat and you'd need to made some modifications to it to get all of the bunks to fit the hull proplerly. The CE Smith Double U-Bolt Bolster and…

The CE Smith Bolster and Swivel Bracket Assemblies part #CE10000G-4 do not have a specified weight capacity as it can vary by the strength of the u-bolts used in conjunctions with these brackets as well as how many brackets are used per board. I know…

The diameter of the U-bolts that need to be used with the CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies #CE10190GA-4 is 1/2 an inch. If you do not have enough U-bolts, you can purchase 8 of them with the washers and nuts included with…

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

Yes, the CE Smith Heavy Duty, Vertical Bunk Brackets #CE10161GA-2 can be used on an I-beam as long as you have compatible U-bolts that fit your beam and the brackets. The CE Smith Heavy Duty, Vertical Bunk Brackets #CE10161GA-2 will require two…

To secure a toolbox in the bed of your truck you would need just one #DZ97904 kit. There are 2 J-hook tie-downs in a kit. To mount the toolbox you just drill through the side of the toolbox, insert the included bolt through the box and attach the…

Yes, the adapter clamps that are used to secure the Extang Trifecta 2.0 Tonneau Cover #EX92985 to the Utili Track on your 2018 Nissan Frontier can be found with part #EX2244-0204. This includes all 4 clamps needed for installation. If you can tell me…

I reached out to my contact at Extang and the front corner raising is a sign of the clamps not being installed correctly. He said you will want to remove the front clamp by removing the knob and then rotating the body up until the thread shows only…

Yes, we sell both of the parts you are looking for in the attached photo. These two parts are the Replacement Clamps for Extang Trifecta Soft Tonneau Covers part #EX2244-0204 and the Replacement Tail Clamp Assembly for Extang Trifecta 2.0 Tonneau…