Are CE Smith Bunk Boards Treated Wood

Question

Question:

Hello, can you tell me if these bunk boards are constructed of pressure treated 2 x 4 lumber or just standard 2 x 4? Thanks.

asked by: David B

0

Expert Reply:

The CE Smith bunk boards, part # CE27845, are made from untreated southern yellow pine 2 x 4's. The carpeting is a marine-grade, weather resistant carpet.

expert reply by: Charles S

0

Answer 1

No, I am sorry Dan but we do not carry that large of bunk boards. The biggest ones we have are the 7' CE Smith Carpeted Bunk Boards item #CE27845 but they are 2x4s. The only solution I have is to use the CE Smith Deluxe Marine-Grade Carpeting…

view full answer...

Answer 2

In order to install the CE Smith Keel Roller for Boat Trailers part #CE29505 on a trailer you will first need the Roller Shaft with Pal Nuts for Boat Trailer Rollers part #CE10727A. Then, all you need is a set of mounting brackets such as the CE…

view full answer...

Answer 3

To mount the CE Smith Panel Bracket for 12" Boat Trailer Rollers - Galvanized Steel #CE10305G you were looking at you have two options. The first being welding the bracket to your trailer. If you go this route you need to make sure to sand off…

view full answer...

Answer 4

Thanks for the photo. It does indeed look like you need to move your keel rollers up towards the bottom of the boat until they are touching but not supporting the full weight. Therefore, marking the bracket when the rollers are flush to the bottom…

view full answer...

Answer 5

I may have a solution for you, but it doesn't look like your trailer has any bracket in place in order to use the CE Smith Self Centering Keel Roller for Boat Trailers part #CE29505 on your boat trailer. For that reason you would first need to…

view full answer...

Answer 6

With just a pair of the CE Smith Keel Roller for Boat Trailers #CE29505 you'd be able to center the boat pretty easily on your trailer. You wouldn't need to convert all 4.

view full answer...

Answer 7

For starters, in order to use the CE Smith Self Centering Keel Roller for Boat Trailers part #CE29505 on your boat trailer you will also need to use the CE Smith Panel Bracket for 12" Boat Trailer Rollers part #CE10305G and the Roller Shaft with…

view full answer...

Answer 8

I do have a few easier options for you to determine the weight capacity of an axle other than using the bolt pattern or the number of lug nuts. The problem with using the bolt pattern to tell the axle capacity is that an axle may have the a bolt…

view full answer...

Answer 9

There's no reason you couldn't install two of the CE Smith Self Centering Keel Rollers #CE29505 that you referenced. This would help center the boat as you pull it onto the trailer.

view full answer...

Answer 10

Ford's optional Blind Spot Information System (BLIS) uses a display built into the OEM mirrors and radar sensors built into the tail lights to alert you to the presence of another vehicle in your blind spot. This feature can be turned off for…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Are CE Smith Bunk Boards Treated Wood

Product Page this Question was Asked From

Continue Researching