Ventline RV Vents and Fans - Roof Vent - BV0554-01 Review Video

In regards to measuring shackle straps, you don't need to remove them to measure accurately. If they are still installed on the trailer simply measure from the center of each bolt head, the two most common are 2-1/4" part #TRSL225…

You did indeed see a video showing how to replace the vent lid #BVD0449-A01. I have linked that video for you here as well. IT was one that I made a while back and that is probably where you saw it.

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover,…

Based on the information that you have provided you can use Ventline roof vent lid #BV0554-01 for white or #BV0554-03 for smoke. These covers have the same numerical information as what you have provided except that it is likely Z26.1 and not 326.1…

The replacement for your ventline AS-13 ANS. Z26.1 DOT 733 roof vent is the #BV0554-03.

The smoke might let a little more light through it, but nothing that noticeable. And aside from that either color does not have the reputation as lasting longer than the other. The white version is part #BV0554-01 and the smoke version is part…

Based on the number and picture you gave me I was able to determine that you have a Ventadome style roof vent from Ventline so the correct replacement lid is the part #BVD0449-A01.

I called and spoke with Forest River, maker of the Continental Cargo trailers. She stated that they use Elixir vents. So that information really helps narrow down the possible options for replacement vent lids. Since you have a trailer made after…

I would be happy to recommend the correct replacement dome for the roof vent in your 2016 Diamond Cargo Enclosed trailer, but you will need to confirm a few things first to determine the correct cover. First you will want to measure the opening in…

I went out to the warehouse and measured one of these seals and it is 52 inches long. This seal is designed to fit on the Ventline Trailer Roof Vents inside sealing surface that is 13 by 13 inches square, see photo.

The only parts list for your triple step is attached. It unfortunately does not give the breakdown to the extent you are seeking with Teflon plate and wave washer as those parts are not replacement options from the manufacturer. I've attached the…

The model and serial number of your vent will be marked with a sticker or stamped on the upper side. Basically open the vent and look down in from the top. It may also be located on the bottom and visible when the screen is removed. If this is not…