How Long is the Roof Vent Seal # BVD0455-01 for the Ventline Trailer Roof Vents

Question

Question:

hello i am interested in seal # BVD0455-01 how long is this seal?

asked by: Butch

0

Expert Reply:

I went out to the warehouse and measured one of these seals and it is 52 inches long. This seal is designed to fit on the Ventline Trailer Roof Vents inside sealing surface that is 13 by 13 inches square, see photo.

expert reply by: Robert G

0

click to enlarge

Answer 1

The Camco RV Vent Installation kit #CAM25003, is designed for replacing or installing roof vents or side vents. It works with a variety of metal RV surfaces. This kit includes a roll of the gray putty tape that is 8 feet long and 1 inch wide, and…

view full answer...

Answer 2

Depending on the type of vent you have there could be a couple of causes. The simplest could be there there's some kind of debris causing the blockage. I recommend getting up on your trailer's roof and checking to make sure there's…

view full answer...

Answer 3

The lips on the Replacement Dome Seal #BVD0455-01 will face out and up, respectively. You can see it fairly well in the picture I have included.

view full answer...

Answer 4

The correct replacement for a Kwikee Step Motor 369545 is the Replacement Motor for Kwikee Electric RV Steps part #LC379147.

view full answer...

Answer 5

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 6

I may have a solution for you, however the only standard spare tire carriers we have available for your trailer wheel with a 5 on 5 inch bolt pattern are U-bolt designs like the CE Smith #CE22007Z-11050-2. Another option I recommend looking at is a…

view full answer...

Answer 7

I'm not quite sure what you mean by the "heart", however for your Ventline VD0434 we have the replacement screen frame #BVA0444-32, the replacement screen #BVD0434-31, the replacement lid #BVD0449-A01, and the replacement ceiling…

view full answer...

Answer 8

The correct replacement for your VDO 433 / VDO 434 is going to be the: -Replacement Screen Frame with Screen for Ventline Ventadome Manual Lift Roof Vents #BVC0573-31. This part includes the replacement screen with the screen frame, however if you…

view full answer...

Answer 9

The only difference between the Optronics ThinLine LED Trailer Tail Light part #STL87RCB and part #STL87RCPG is that the latter has bullet style (removable) connectors and the former has bare wire ends.

view full answer...

Answer 10

I do have a replacement screen available for the Ventline Ventadome VD0433 Trailer Roof Vent that you have on your trailer but they do not make a non-removable version that will work for you. Instead, I recommend replacing the screen with part…

view full answer...

Answer 11

I recommend the NOCO Commercial Grade battery box part #329-HM484 to hold both of the group 24 batteries. From my research a group 24- 12 volt battery measures 10.25" long x 6.8125" wide x 8.875" tall. This battery box measures…

view full answer...

Answer 12

LED clearance light #CBL22AB is not DOT rated as a turn signal so I do not recommend using it. LED light #STL72AB can be used as a turn signal. It is one of the smaller options at 6-7/16" Long x 2-5/16; tall x 1-3/4" thick. Used with…

view full answer...

How Long is the Roof Vent Seal # BVD0455-01 for the Ventline Trailer Roof Vents

Product Page this Question was Asked From

Continue Researching