MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip - White
(532 reviews)
Price: $45.71
In Stock
MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip - White
Item # MA76JR
Our Price: $45.71
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (532)
- Q & A (0)
- Photos
MAXXAIR RV Vents and Fans - MA76JR
- Vent Cover
- Roof Vent
- 14W x 14L Inch
- White
- MAXXAIR
- Plastic
Durable, UV-resistant cover lets you run your RV roof vent any time and in any weather. Angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out. EZClip pins allow the cover to be opened or removed for easy maintenance.
Features:
- Cover lets you open and run your RV roof vent at any time and in any weather
- Compatible with non-powered roof vents and low or high-powered ventilation fans
- Large vent area is twice the size of vent areas on standard covers
- Side vents create cross-ventilation
- Angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out
- EZClip pins make it simple to open or remove cover for roof vent maintenance
- Creates a hinge when pins are removed on one side for easier opening
- Durable, high-density polyethylene construction is UV resistant
- Protects your roof vent from hail, falling branches, and other debris
- Simple no-drill installation on MaxxFan and MaxxFan Plus roof vents - hardware included
- Drilling required on all other standard roof vents
- White color
- Made in the USA
Specs:
- Application: fits over most standard 14" x 14" roof vents
- Designed specifically to fit 2015 and newer MaxxFan and MaxxFan Plus roof vents with mounting tabs
- Can be used with high-powered, low-speed (3- or 4-speed) fans
- Overall dimensions: 22" long x 17-12" wide x 9-3/4" tall
- 6-Year limited warranty
Note: Some vents may not open fully when used with this vent cover. If opened 50% or more, the vent will still achieve maximum airflow.
The MaxxAir II has a vent area that is twice the size of the vent area on standard covers. This provides more airflow in and out of your RV or trailer, and the side vents provide cross-ventilation for even more airflow. The angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out.
EZClip Pins Simplify Opening
This MaxxAir II vent cover comes with 4 EZClip pins. These pins enable you to easily open or remove the cover. When the pins are removed from one side, the opposite side acts as a hinge, allowing you unobstructed access to your roof vent for cleaning and maintenance. To secure the cover closed, slide the pins back into the cover and push them up to lock them in place.
Installation on 2015 or Newer MaxxFan or MaxxFan Plus Roof Vents
The MaxxAir II vent cover is specifically designed for installation on 2015 and newer-model MaxxFan and MaxxFan Plus roof vents - no drilling or tools are required. The integrated mounting brackets on the MaxxAir II perfectly align with the mounting tabs that are molded onto the flange of the roof vent. To install, fit the cover over the roof vent. Then slide the included EZClip pins through the tabs and rotate them up to secure the cover in place.
Installation on Older Model MaxxFan or MaxxFan Plus Roof Vents
If you're installing this cover over an older model MaxxFan or MaxxFan Plus roof vent without mounting tabs, no drilling is required, and all necessary hardware is included. The MaxxFan roof vent has pre-drilled holes in the side wall that are hidden under plastic plugs. Just remove the plugs and fasten the aluminum brackets to the side wall with stainless steel screws. Then insert the EZClip pins through the brackets to secure the cover in place.
Installation on All Other Standard Roof Vents
If you're installing this MaxxAir II cover over any other roof vent, then drilling into the frame of the roof vent is required to mount the aluminum brackets. Stainless steel screws, nuts, and washers are included to install the cover. However, if you're installing the cover over a high-powered, high-speed ventilation fan, use the included self-tapping screws to mount the cover instead.
00-933081 MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip - White
Replaces MaxxAir MA00-933072
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Product did not meet expectations
Customer Reviews
MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip - White - MA76JR
Average Customer Rating: 4.7 out of 5 stars (529 Customer Reviews)
Durable, UV-resistant cover lets you run your RV roof vent any time and in any weather. Angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out. EZClip pins allow the cover to be opened or removed for easy maintenance.by: Marc 05/05/2024
Ups got my delivery a day later than I paid for.... supposed to fit, but I had to trim the cover to fit.... not complaining about the cover, once trimmed it fit but should have fit out of the box according to the expert.... wish it had screen, but, I'll add it later....
by: David 04/17/2024
The vent cover is a quality product and was very easy to install.
by: John 04/25/2023
Just what I was looking for. Easy to in stall.
by: Bill05/07/2024
Sorry to say they were the wrong ones for my Rv. The dealership told me the wrong ones. My Rv has different fans then they said it did.
by: Chuck08/03/2023
Not the greatest place to buy parts. After spending sometime on the phone trying to order the correct MaxxAir II fan cover I was still sent the wrong item. I returned the item and was charged over half the price of the vent fan price itself in coverage on shipping. I was never informed that if the part was incorrect it would be up to me to pay postage to return. Unacceptable in my book.
by: Timothy 04/05/2024
Nicely engineered with great finish AND made in the USA!
by: Fenwick Grebl02/13/2024
Product arrived as scheduled,easy to install, great price. Thanks etrailer!
by: Michael 03/03/2023
A bit more translucent than opaque. Will allow light in.
Michael
3/4/2024
Very happy with the vent covers. Allows me to have the vents open while in storage with no concern about rain intrusion. A real problem solver.
by: Jack 08/04/2023
Works as supposed to; Maxxair does not allow power vent/fan to open ALL the way but don't know if it really matters.
by: Kenneth 07/23/2023
Fit perfectly over my rain sensing powered roof vents. Took longer to get up on the roof of my RV than it did to install the covers. All I had to do was slide supplied spring clips into the existing slots
by: Fay09/07/2022
Received products quick and had a great followup by etrailer crew.
Mike C.
9/8/2023
They held up very well and allowed us to leave vents open while traveling and in the rain. We traded the camper in on a new 5th wheel so we need to buy them again
Mike L.
11/1/2023
@MikeC We're glad they worked well for you while you had them!
by: Craig 09/03/2022
Delivery was quicker than expected and at a great price. Thank you E-Trailer!
Craig
9/3/2023
Great, installation was simple.
by: Peter09/30/2023
Easy to install. Pull 4 pins and unit comes off. Have had no issues
by: Wilfred 09/20/2023
As Described, Fast Shipping, Great Product & Service I will use Etrailer again, Thanks
by: David 05/07/2023
Ready install, worked as advertised. I had to be careful that the cover did not interfere with the existing vent cover - the maxair had to be placed as far to the rear of the existing vent to allow the existing cover to clear the maxair - not much wiggle room.
by: Richard04/28/2024
High quality, easy install.
by: Mark04/30/2023
Very easy to install when paired with MaxxAir's vent fans. 5 minute install!
by: William01/11/2024
Holding up just fine still works good
by: Scott 05/04/2023
Bought these for my 2022 alliance paradigm, our rv had the studs installed on the factory max fans. Because of this there was no deilling required, just place the covers and push the supplied pins through...couldnt have been easier!!
by: Milinda01/02/2024
Arrived quickly and is working great!
by: Douglas05/24/2023
The vents were exactly what we needed, were fairly easy to install, and the price was reasonable. Order came quickly! We were very please with the order and have placed additional orders with etrailer!
by: Glen08/10/2022
Super easy to install 4 pins. Thats it.
Glen
8/12/2023
Still there and still works great.
by: Jason12/16/2023
Great price, fast shipping, what more could you ask for?
by: Wade 04/25/2023
They came as ordered, and look great. Etrailer is a great company to purchase products from because of their good customer service. I’ve used the older models in the past and looking forward to seeing how these ones work.
by: Brian10/12/2022
E trailers price and service can't be beat. Ordered a Max AirII vent cover to replace the one I broke backing under a low object(The outside edge of my metal RV cover,keep it centered Brian, you know that.) E trailers price and shipping are great, on time no problem!
25
529
Show More Reviews
See what our Experts say about this MAXXAIR RV Vents and Fans
- Recommended Bug Screens For MaxxAir II Vent CoversThe Replacement Bug Screen for MaxxAir II RV and Trailer Roof Vent Covers # MA10-20121 are the correct bug screens for a MaxxAir II Vent Cover. The screens just snap into the cover for an easy installation.
view full answer... - RV and Trailer Roof Vent Covers Compatible With Mounting Flanges on MaxxFan and MaxxFan Plus FansYes, the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip In White # MA76JR, Black # MA86JR and Smoke # MA26JR will attach to the mounting tabs already found on MaxxFan and MaxxFan Plus roof vents. You may not be able to fully open the roof vent with these covers and the MaxxFan roof vents. For the lid on the MaxxFan and MaxxFan Plus roof vents to fully open you will want to use the MaxxAir FanMate RV and Trailer Roof Vent Cover in White # MA00-955001, Black # MA00-955002 or Smoke #...
view full answer... - Is the MaxxAir II RV and Trailer Roof Vent Cover Solid White or Translucent?The MaxxAir II RV and Trailer Roof Vent Cover part # MA76JR is a translucent white color.
view full answer... - Difference Between MA00-955003 and Other MaxxAir Vent CoversI was not able to find a part 00955008 in our system or google so I am not sure what that part is to tell you the differences but I can tell you about the MaxxAir FanMate Cover part # MA00-955003. The MaxxAir FanMate RV and Trailer Roof Vent Cover part # MA00-955003 is designed to be taller than the other MaxxAir vent covers at 10-1/4" tall. For example: the MaxxAir II RV and Trailer Roof Vent Cover part # MA76JR is 9-3/8" tall. The MaxxAir FanMate RV and Trailer Roof Vent Cover MA00-955003...
view full answer... - Can The MAxxAir Vent Cover Be Used With Powered RV Roof Vent The MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip # MA76JR can be used with powered vents. The cover will prevent the vent lid from fully opening, but the manufacturer has stated in the past that the sensor in it will feel the pressure when the lid touches the cover and stop the lift arm from raising higher. You should have no issues using this on your MaxxAir roof vent.
view full answer... - I have a mass air 4401k what rain cover do I need The correct rain shield for your MaxxAir MaxxFan 4401K # MA00A04401K would be the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip - White # MA76JR. This cover comes with a pin & clip connectors to easily attach to 2015 and newer MaxxAir vents, but also includes mounting hardware so you can mount it to older models. If you have an older model unit and need to screw in mounting brackets then I recommend picking up some butyl tape # AL28FJ to place on the back of the mounting holes...
view full answer... - How to Install MaxxAir II RV Trailer Roof Vent # MA76JRThe MaxxAir II RV Roof Vent # MA76JR comes with all the needed hardware for installation. To install the cover you first need to position the cover in place and mark where the mounting brackets are located. Drill 3/16 inch holes in the marked positions and attach the brackets with the included screws. Close the cover, install the 4 snap lock pins, and push the snap lock pins down into the lock position and you're all set!
view full answer... - Is Installation Hardware Included with MaxxAir II RV Trailer Roof Vent Cover # MA76JRYes, the hinged brackets along with the self-tapping, stainless steel screws are included with the MaxxAir II RV Trailer Roof Vent Cover # MA76JR. This is everything you will need for installation.
view full answer... - Do MaxxAir II RV and Trailer Roof Vent Covers MA76JR Fit Most 14 x 14 RV Roof VentsThe MaxxAir II RV and Trailer Roof Vent Cover # MA76JR is a general-purpose vent cover that will work with a wide range of vent brands and models. It is designed to work with the most popular 14 x 14-inch size of RV roof vents. RV makers do not keep track of the specific vent models they install so there is no way to confirm compatibility with your vents in advance but the odds are they will work fine. Even if your vents cannot open fully when used with this vent cover they will still provide...
view full answer... - Recommended Vent Cover For MaxxAir MaxxFan To Allow Travel Speeds With Open VentThere are no posted speed restrictions on this MaxxAir MaxxFan - White, # MA00A04301K, so I called the manufacturer to see if they have recommendations. Their tech said they don't test those lids to see what speeds they can handle, but it is likely that highway speeds with a crosswind could rip the lid off the unit. If you want to protect your vent for travel and from rain to allow that vent to be open, you will want the # MA76JR or the # FVU1500WH roof vent cover.
view full answer... - Can MaxxAir Roof Vent # MA00-04000K be Used with MaxxAir Vent CoverIf you already have a MaxxAir roof vent on your RV you can pretty easily replace it and upgrade to the # MA00-04000K as this fits the same size mounting hole. There's no reason you couldn't use your current roof vent cover as well as long as what you have is the # MA76JR which is the style that bolts to the frame of the roof vent.
view full answer... - Replacement Bug Screen for MaxxAir II RV and Trailer Roof Vent CoversYes, the correct replacement bug screen for your MaxxAir II RV and Trailer Roof Vent Cover part # MA76JR is the Replacement Bug Screen for MaxxAir II RV and Trailer Roof Vent Covers part # MA10-20121.
view full answer... - Maxxair Maxxfan 4951KS 4 Button Wall Controller Causing Functions To Work Opposite Or Not At AllIf your MAxxair fan 4951ks is new there have been a few instances with the RJ11 cable that runs between the controller and the fan circuit board causing the functions to run opposite. This could mean the cable is a standard cable and may be wired different. I suggest replacing the cable first. If the fan is not new and the new cable doesn't fix the issue I suggest replacing the circuit board with the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents Item # MA10A04751KS
view full answer... - Will MaxxAir II RV Trailer Roof Vent # MA76JR Protect Trailer From ElementsYes, the MaxxAir II RV Roof Vent # MA76JR is designed for exactly that. This will do a great job of protecting your RV/trailer interior from the elements. It will also allow you to still operate the vent when you're stuck inside the trailer due to bad weather. It will fit most standard RV roof vents that measure 14 inches x 14 inches.
view full answer... - Enclosed Trailer Roof Vent Cover Needed for a MaxxAir 4-Speed MaxxFanSince the MaxxAir 4-Speed MaxxFans # MA00A04301K and # MA00A04401K have the tabs on the side you need a MaxxAir II cover that mounts directly to the tabs. We have these in White # MA76JR or Black # MA86JR depending on what you would like for your vent. Please note that these will fit but may not allow your vent to open completely. I have verified that this will not be a problem.
view full answer... - Should I Use Smoke or White MaxxAir Roof Vent and Vent CoverBoth the smoke and white colors will be the same in regards to how much heat gets through and will be relatively similar when it comes to light, although the smoke will naturally be a little darker. Since you'll be using the roof vent AND a cover though you won't see as much light either way so my recommendation is to use whichever matches the color scheme of your trailer better. For white you want these parts: Vent - # MA00-04002K Vent Cover - # MA76JR For smoke you want these parts: Vent...
view full answer... - MaxxAir Vent Covers In White For Ventline Ventadome Trailer Roof Vent V2094The MaxxAir Standard RV and Trailer Roof Vent Cover # MA00-933066 will fit your Ventline Ventadome Trailer Roof Vent # V2094SP-30. This will allow you to leave your vent open and run the fan even in the rain. You can also leave the vent open when you travel to help keep the trailer cooler and expel any stale air from inside. We also have the MaxxAir II RV and Trailer Roof Vent Cover # MA76JR that provides an easy clip attachment and removal bracket. This will allow you to easily remove...
view full answer... - Solution for Needing Replacement Roof Vent Cover Brackets with Unknown Cover BrandI appreciate you getting me the picture of your roof vent cover but since we do not carry anything that matches it the best option we have will be to replace the cover. For that we have the MaxxAir II RV and Trailer Roof Vent Cover # MA76JR which will work great and fits over all of the standard RV roof vents.
view full answer... - Recommended Fan-Tastic Roof Vent Cover and Lid for Power Lift Vent on 2018 Forest River Cedar CreekIf you are looking for the replacement lid, then you will need the Replacement Dome for Fan-Tastic Vent RV Roof Vents - Tinted # FVK1020-19 or white # FVK1020-81 but it sounds like you are seeing the larger cover. To get the cover that allows the full extension of the lid, I recommend the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover - 23" x 19.5" x 10.25" - Smoke Item # FVU1500GR.
view full answer... - Can MaxxFan RV Roof Vent Work with Fan-Tastic RV Roof VentThe MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip # MA76JR is universal enough that it can work with your Fan-Tastic RV roof vent. Fan-Tastic also makes a cover that would work great as well with the part # FVU1500BL. The MaxxAir cover would be easier to remove as it has cotter pins that can get pulled whereas the Fan-Tastic would have a more permanent install.
view full answer... - Difference Between The MaxxAir FanMate Vent Cover And The MaxxAir II Vent CoverThe MaxxAir FanMate vent cover Item # MA00-955001 is going to be just a little taller but the louvred end tapers in and it does not come with the screen which is Item # MA00-955202. 25" long x 18-1/8" wide x 10-1/4" tall. The MaxxAir II Item # MA76JR is a more lower profile design, and the louvred end is straight up and down. 22-1/16" long x 18-1/8" wide x 9-3/4" tall. This does not come with a bug screen, and unfortunately, there is not one designed for this vent cover. Each is also...
view full answer... - Will the MaxxAir II RV and Enclosed Trailer Roof Vent Cover # MA76JR Fit Over Fan-Tastic VentThe MaxxAir II RV and Enclosed Trailer Roof Vent Cover # MA76JR is going to work well on your 2016 Airstream Interstate RV that has a Fan-Tastic vent installed on it.
view full answer... - Max Roof Vent Cover Opening for RVsI spoke to my contact at MaxxAir and they informed me that they do not make a vent cover that will allow a roof vent to open the full 12". They were also unaware of another manufacture who does as the 10" height of most roof vent covers is more or less an industry standard. I recommend using the MaxxAir II RV and Enclosed Trailer Roof Vent Cover part # MA76JR for white or part # MA00-955003 for smoke. This roof vent cover will allow for you to open the vent about 10" which again will...
view full answer... - Roof Vent to Install Above ShowerSince you are needing a vent that sits above your shower you need one that doesn't have power. Roof vents that use electricity, like the MaxxFan Deluxe Roof Vent # MA00-05100K, aren't built to resist the water that would be filtering through if installed above a shower. Because of this I recommend installing the Ventline Ventadome Trailer Roof Vent # V2092SP-28 which operates manually and fits a standard 14" x 14" vent opening. If you would like to leave the vent open when it is raining...
view full answer...
Do you have a question about this RV Vents and Fan?
Info for this part was:
Installed by:
Jeff D
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Noah M
Updated by:
Konnor K
Updated by:
Manda E
Edited by:
Amanda M
Written by:
Adam Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
John B.
4/26/2024
The MaxxAir vents have been working out no trouble with them at all, they hold up to wind and rain and keep things dry.