Ventline Vent Cover Replacement - Smoke

Question

Question:

I need a ventline AS-13 ANS. Z26.1 DOT 733 roof vent. Where can i get one in Canada. It is smoked. Is it the BV0554-03 that i need??

asked by: Paul

0

Expert Reply:

The replacement for your ventline AS-13 ANS. Z26.1 DOT 733 roof vent is the # BV0554-03.

expert reply by: Kevin C

0

Answer 1

Based on the information that you have provided you can use Ventline roof vent lid #BV0554-01 for white or #BV0554-03 for smoke. These covers have the same numerical information as what you have provided except that it is likely Z26.1 and not 326.1…

view full answer...

Answer 2

I called and spoke with Forest River, maker of the Continental Cargo trailers. She stated that they use Elixir vents. So that information really helps narrow down the possible options for replacement vent lids. Since you have a trailer made after…

view full answer...

Answer 3

Based on the number and picture you gave me I was able to determine that you have a Ventadome style roof vent from Ventline so the correct replacement lid is the part #BVD0449-A01.

view full answer...

Answer 4

The replacement vent cover for your Sundowner horse trailer can be different as vents are often changed over the years by manufacturers. The vent cutouts remain consistent because there is an industry standard size so replacements are available but…

view full answer...

Answer 5

The replacement trailer roof vent cover you will need is one that measures the 14-1/4 x 14-1/4 inches. If your old vent lid was the rounded dome style like the Ventline #BV0554-03 lid you were looking at what you will want to check is that cover uses…

view full answer...

Answer 6

Phillips is the parent company of Ventline, which is a major RV vent supplier. We do carry replacement fan blades in several designs that you can see on the linked page. None of these are branded as a Phillips product but if you can match up the size…

view full answer...

Answer 7

Thank you for providing the replacement vent lid part number VA530. This was indeed once a valid part that is now obsolete, but we can still help you select a replacement vent lid. Please refer to the linked photo showing the different hinge styles…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...