Thule Hitch Bike Racks 853-7489 Review Video

I checked with my contact at Thule and verified that the Thule replacement hitch bolt you are looking for is part #908-1240-54. It is a 12 x 40mm hex bolt with a property class of 8.8. It should be installed with M12 washer, #951-1224-54, and M12…

We do have a diagram which shows where you need to trim when installing the Curt #C13397. I have attached a picture below which shows the measurements from the Curt instructions. We have installed this hitch with and without cutting the underbody…

From the center of the hitch pin hole to the face of the opening on the Curt Trailer Hitch Receiver #C13397 it measures 2-1/2" and then from the center of the hitch pin hole to the back of the receiver (where that bracket exists) is 4".…

If I am understanding your issue correctly, you need the Replacement 2" Hitch Adapter for Thule Doubletrack, Hitching Post Pro, #853-7489. And yes, you slide this on to the shank and screw it into place to hold it. That piece is what upsizes it…

I reached out to Thule on your behalf and shared your provided photos which helped a great deal. Yes, the Replacement 2" Hitch Adapter for Thule Doubletrack #853-7489 and Replacement M6 x 16mm Flat Cap Screw #853-5787-02 will fit your rack and…

The Thule T2(917) bike rack should fit up to a 29" diameter tire that is 3" wide with the stock parts according to Thule. So the Replacement Locking Ratchet Arm Assembly #753-3579 and Replacement Hook #753-3583 are going to be the same size…

A-frame trailers like your 2010 Keystone Hideout 27bhs all use the same mounting flange bolt patterns. The etrailer jack part #TJA-5000S-B that you referenced is going to fit your trailer and work well as a replacement jack.

The diameter of the larger hole in the adapter part #853-7489 is 1/2 inch.

I have a solution for you. You can't convert the Thule T2 Pro XTR 2 Bike Platform Rack #TH23JV to a 2 inch hitch according to my contact at Thule so you will need to use an adapter. I recommend using the Brophy Hitch Reducer 2" to…

Thank you for the picture. It looks like you have the Thule Hitching Post Pro, part #TH934XTR. We have a replacement bolt for that, but the bolt you reference, part #915087031, is not it. The replacement bolt you need comes in the Replacement…

Thanks so much for the photos, they were very helpful, and based on that and the fact you mentioned it was from 2009, I am almost certain that what you have there is the Thule Roadway 914 bike rack. We do in fact have the correct 1-1/4" to…

The Thule Replacement Aluminum Shank Adapter, part #853-7292 is designed to work with Thule bike carriers #TH954 and #TH914, and allows the 1-1/4 inch stinger on the bike racks to fit a 2 inch trailer receiver. I called my contact at Thule and they…