Draw-Tite Max-Frame Trailer Hitch Installation - 2020 Honda CR-V Video

We do have a diagram which shows where you need to trim when installing the Curt #C13397. I have attached a picture below which shows the measurements from the Curt instructions. We have installed this hitch with and without cutting the underbody…

The best trailer hitch receiver for your 2021 Honda CR-V (which fits all models, including your Sport), is the following: - Draw-Tite Trailer Hitch Receiver #DT79MR There's a couple of reasons for that, starting with the fact it has excellent…

We have great hitch options for your 2020 Honda CR-V but all of them do require fascia trimming since the lower fascia of the vehicle wraps around the back of the vehicle to the underside of it. So a hole has to be trimmed for the hitch to fit where…

From the center of the hitch pin hole to the face of the opening on the Curt Trailer Hitch Receiver #C13397 it measures 2-1/2" and then from the center of the hitch pin hole to the back of the receiver (where that bracket exists) is 4".…

If you were to install both the Draw-Tite Max-Frame Trailer Hitch Receiver #DT79MR (76342) and #76128 on your 2022 Honda CR-V you'd find that the DT79MR is going to sit about 1/2" higher so these are relatively at the same height. With that…

The Flint Hill Goods Cargo Carrier #FHG49ZR is designed to be used with the threaded hitch pin that it comes with, so a standard, non-threaded hitch pin won't work. The threaded pin is used as an ant-rattle mechanism. If you're looking for a…

Yes, we have since been able to confirm the etrailer Trailer Hitch Receiver part #e98848 will fit a 2021 Honda CR-V Hybrid after some confusion early on. There have been multiple reviews from our customers stating it was compatible. I have attached a…

The etrailer hitch #e98848 will fit your 2021 Honda CRV Hybrid EXL. When the description for the etrailer hitch says both "excluding hybrid and touring" and "hybrid," the description is saying it will fit both 2021 Honda CR-Vs…

I am not aware of any laws regarding altered driving speed limits when a cargo carrier is in use, but it is simple enough to check your local or state laws. Your local highway patrol can likely provide confirmation if there are any such laws in place…

Yes, the etrailer Trailer Hitch Receiver part #e98848 which is what I recommend, is a confirmed fit for a 2023 Honda CR-V Hybrid Sport Touring. It also has a 2" opening so it will be great for towing or other hitch mounted accessories like bike…

We do not have a longer threaded hitch pin option that'll work with the Flint Hill Goods 22" x 60" Cargo Carrier #FHG49ZR however what you could do is use the Roadmaster Hitch Pin and Clip for 2" or 2-1/2" Hitch - 5/8"…

The size wrench or socket you would need to tighten the bolt head of the #S64029 would be either a 7/8 inch or 22 mm. I attached a review video for this product for you to check out as well.