Review of RockyMounts Hitch Bike Racks - Adapter Sleeve - RKY54FR Video

We do have a diagram which shows where you need to trim when installing the Curt #C13397. I have attached a picture below which shows the measurements from the Curt instructions. We have installed this hitch with and without cutting the underbody…

We have great hitch options for your 2020 Honda CR-V but all of them do require fascia trimming since the lower fascia of the vehicle wraps around the back of the vehicle to the underside of it. So a hole has to be trimmed for the hitch to fit…

From the center of the hitch pin hole to the face of the opening on the Curt Trailer Hitch Receiver #C13397 it measures 2-1/2" and then from the center of the hitch pin hole to the back of the receiver (where that bracket exists) is…

The best trailer hitch receiver for your 2021 Honda CR-V (which fits all models, including your Sport), is the following: - Draw-Tite Trailer Hitch Receiver #DT79MR There's a couple of reasons for that, starting with the fact it has excellent…

I would discourage the use of an adapter for use of 2 inch accessories in 1-1/4 inch trailer hitch receivers. The reason is that the adapter places the carrier farther away from the rear of the vehicle and hitch, creating additional torque that 1-1/4…

We do have an adapter that will allow you to attach a 2" cargo carrier to the 1-1/4" hitch on your 2016 Nissan Altima. I recommend the adapter #e43YR. This is 6-1/2" long and will go in to your 1-1/4" hitch and give you a 2"…

The 1 bike add-on for the Rola Convoy bike rack you are thinking of is no longer available, however, you can convert the RockyMounts MonoRail Solo Bike Rack for 1 Bike - 1-1/4" and 2" Hitches - Wheel Mount #RKY10007 into a 2-bike rack with…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The Rhino-Rack Roof Rack System #Y02-490B referenced in your question is confirmed to fit your 2008 Toyota Tacoma with the 5-1/2 foot bed and will work great on the canopy. This system is specifically designed to attach to camper shells like what you…

Yes the Rhino-Rack Aero Bar Roof Rack for Camper Shells part #Y02-490B will allow for the slight contour of your truck topper. The track length is as you stated 63" so you have to have at least that amount but if you're slightly over…

I definitely recommend a platform rack for electric bikes so you do not have to lift the heavy bikes as far to get them on the rack. For a platform rack, I recommend the RockyMounts MonoRail 2 Bike Platform Rack #RKY10003 which is designed to carry 2…

I spoke with my representative in the Tech Services department at Curt Manufacturing. According to Curt, the heat shield that's removed in step 2 is NOT reinstalled. Once the hitch is in place, there is no longer room for the heat shield, and the…