Review of Snap-Loc E-Track Metal Screws - SL99FR Video

Since your 5' x 10' traler has a V-nose, we recommend going with the Adco SFS AquaShed Trailer Cover For Trailers up to 12' Long #290-46002. This will allow a bit of extra room for the V-nose. With the included straps on the front and…

Self tappers like the part #SL99FR would work great as they have drill bits on the end which would make it through the metal of your studs and then attach.

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…

On an 4 foot long section of E-track #EM19147 and 2 screws every 16 inches that is a total of 6 screws in the aluminum frame. This most likely will not get you near the capacity of the E-track. I recommend bolting through the aluminum frame so that…

If it were my trailer I would fasten the E-Track to the support beams under the trailer, either the side to side one or front to back ones, by going all the way through those support beams. E-Track like #E19148 is zinc-coated steel and since the…

Since you have an aluminum trailer I suggest using a tie-down that has a backing plate like #RR5K. This will help reinforce the tie-down since aluminum may not hold up. It would be even better if you can install the tie-downs to the frame of the…

That is going to come down the thickness/type of metal underneath the 3/4" plywood floor on your trailer. If the metal is the frame or crossmember and is made of steel then the Snap-Loc E-Track Self-Drilling Metal Screws - Qty 20 #SL99FR would…

The Reese Strait-Line system should be chosen according to your loaded tongue weight. Ideally you want your actual tongue weight to fall in the middle of the tongue weight range of the weight distribution hitch. Since your dry tongue weight is 1,180…

Zinc plated screws are going to be the best option for use with aluminum to resist galvanic corrosion. This corrosion you are referring to is from two dissimilar metals reacting so you want to use the most similar metals when installing your E-track…

The CargoSmart Horizontal or Vertical X-Track - Matte Black - Steel - 667 lbs - 5' Long #3481788 will attach directly to the vertical metal frame on your trailer. You will use Self-Tapping Screw - 1/4" -14 x 3/4" Long - Zinc…

The wood strips on your trailer appear to be in place only to allow objects to slide along the wall and to not damage the interior plywood on the walls. To be safe you will want to verify with the trailer manufacturer that there is no structural…

There may be a solution for you though the Traffic Cone Holder for E-Track or Rack'em Spare Tire Holder #RA-26 does not have a specific weight rating for one of the brackets. There are a couple options for you to consider like the CargoSmart…