Recommended Storage Cover For A 5' x 10' Enclosed Trailer With A V-Nose

Question

Question:

I have a 5 x 10 v-nose cargo trailer 5ft interior height - dual cargo doors rear with a side door. What would be the best cover to buy?

asked by: Michael M

0

Expert Reply:

Since your 5' x 10' traler has a V-nose, we recommend going with the Adco SFS AquaShed Trailer Cover For Trailers up to 12' Long # 290-46002. This will allow a bit of extra room for the V-nose. With the included straps on the front and back, you will be able to get a snug fit all the way around the trailer. This cover is 7' 10" tall overall. It also has zipper manels on the rear and passenger side to allow access.

expert reply by: Jesse M

0

Answer 1

A lot of covers, like the Adco SFS AquaShed Cover for Bumper Pull Trailer - Up to 14' Long - Gray #290-46003 you purchased, will typically have some type of reinforcement at those common tear points but if your trailer has sharp edges then it…

view full answer...

Answer 2

Though there isn't anything specifically for a 6 x 10 v-nose enclosed trailer, we have something that may work for you. Since the v-nose extends the length somewhat, a cover for a bumper-pull horse trailer up to 12 feet could work, depending on…

view full answer...

Answer 3

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The etrailer E-Track Roller Idler #e67HR is 3" from the top of the e-track to the bottom of the roller.

view full answer...

Answer 6

Since your 5' x 10' traler has a V-nose, we recommend going with the Adco SFS AquaShed Trailer Cover For Trailers up to 12' Long #290-46002. This will allow a bit of extra room for the V-nose. With the included straps on the front and…

view full answer...

Answer 7

Hello John. The mounting bolt holes on the CargoSmart D-Ring Tie-Down Anchors #3481764 are 1/4" in diameter.

view full answer...

Answer 8

The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and you'd be…

view full answer...

Answer 9

The Draw-Tite Max-Frame Trailer Hitch Receiver #76020 for your 2023 Mazda CX-9 is no longer compatible with the J-Pin 63201. Draw-Tite stopped making their receivers compatible with this pin in 2021 and we have long sold through all those receivers.…

view full answer...

Answer 10

No, it doesn't but I have a less expensive one that does. For your 2023 Mazda CX-9 you will want the Draw-Tite Hitch item #76020. This hitch is custom fit and bolts to your Mazda with included hardware. I really like this hitch because it mounts…

view full answer...

Answer 11

Based on the dimensions you mentioned the correct Dexter EZ Flex kit you would need is the part #K71-654-00 which is compatible with what you have and will do a great job improving ride quality.

view full answer...

Recommended Storage Cover For A 5' x 10' Enclosed Trailer With A V-Nose

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching