Erickson E-Track Tie-Down Kit with Ratchet Straps, Wheel Chocks, and Roller Idlers Review Video

For your Dodge Challenger I recommend using the Erickson E-Track Tie-Down Kit #EM58523-09162-4. With this kit you get 4 e-track wheel straps that will provide you a great way of securing your Challenger. The straps will be easier to route around…

Yes, since the Gen-Y Hitch Gooseneck Trailer Hitch for Ford OEM Puck Systems #GY43XR has a 5" offset it will place the pin weight 2-1/2" behind the current center of your gooseneck hitch ball. This does means the front axle will be…

Yes we do have backing plates for the e-tracks. I recommend going with etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 4 #e66RR which is a nice kit that includes 4 plates and all the…

The Bulldog Winch Ratcheting Wheel Tie-Down Strap #BDW20362 is designed to connect to a D-Ring type of connection point so you wouldn't need to install an e-track on your trailer. For your application I recommend installing the Brophy D-Ring…

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you…

Yes, the Erickson E-Track Tie-Down Kit w/ 2 Ratchet Straps with Roller Idlers and 2 Wheel Chocks #EM58523-09162 can be used with tires that are mounted on 20 inch diameter wheels.

For the E-Track Trailer Cargo Control to be able to reach it's full capacity, the direction of the pull should be parallel to the direction that the e track is installed. How much the capacity would be lowered by pulling the load perpendicular to…

The Erickson E-Track Tie-Down Anchor #EM37JR is 5.2" Long, 5.2" wide and 0.5" tall. The two 5/16" holes are centered on each side of the of the bracket 2.75" from each other. Please see the attached image.

The bumps around the edge of the Erickson E-Track Tie-Down Anchor #EM37JR are there to add strength to the flange so that it supports weight better.

Since you plan on attaching your fasteners to the studs of the wall the amount of screws you plan to use would be plenty. We recommend using more screws in situations where studs are not accessible. The recommended height will be whatever works best…

The etrailer E-Track Backing Plates with Hardware part #e76YR work with any of the etrailer Horizontal E-Tracks like part #e42VR. The track and backing plates allow for up to 2,000 lbs but you'll also be limited by the material you're…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…