Review of Snap-Loc E-Track Wood Screws - SL49FR Video

The correct product to use to support the boards you plan on using to support the bed would be the E-Track Wood Beam Socket #59149. Since you will want to have the 2 by 4s on edge to support the plywood, and the only way the #59149 could be…

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you…

Since you plan on attaching your fasteners to the studs of the wall the amount of screws you plan to use would be plenty. We recommend using more screws in situations where studs are not accessible. The recommended height will be whatever works best…

Since you have wooden floors in your trailer the hardware I would recommend for installing e-track like the part #EM19147 would be the Erickson Hardware kit part #SL49FR which is basically wood screws.

Yes. The etrailer Horizontal E-Track - Galvanized Steel - 2,000 lbs - 8' Long #e62VR can be driven on without any issue and have a maximum capacity of up to 6000-lbs each(break strength), so they'll be able to handle your ATV/UTV without…

The Erickson E-Track Wood Beam Socket you referenced, part #59149, will work with 2 x 4 lumber or the 2 x 6 material you intend to use. These are usable with either vertical, horizontal or single-slot E-Tracks. In your application you can use either…

I do have a solution for you, but I think welding something to the floor is going to really limit where you can place things to have them tied down. I don't think you're going to be able to get away from the issue with galvanic corrosion…

To get power to the pin in the 1:00 position of the #PK12703 7-way trailer connector, you'd run a length of 10 gauge wire #10-1-1 which is sold by the foot from the terminal for the 1:00 pin on the 7-way to the positive battery terminal, via a…

While running the MaxxAir MaxxFan Deluxe #MA00-06401K requires about 4-1/2 amps. For startup it will pull around 9 amps.

I am not sure what products you are referring to but the most safe, secure, and easy tie down method we offer for your Can-Am Spyder is a combination of the Erickson Horizontal E-Track part #EM19147 (3), the Erickson E-Chock Wheel Chocks part…

The correct torque for installing lug nuts on your 5 X 8 trailer's 5-lug wheels will depend on the size of the lugs. For a 1/2-inch lug the torque spec ranges from 75- to 85-ft-lbs. For a 9/16-inch lug the torque spec ranges from 135- to…

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…