Redline Trailer Suspension - Leaf Spring Suspension - 115706S Review Video

The cupholder portion of the Optronics #2409171B is adjustable between roughty 2-1/2" and 3-3/4" so this would be a good fit for you if you're referring to the beverage holder dimensions. The casing dimensions on this cup holder are…

Trailer hubs that a 8 inch wheel can also fit a 12 wheel so yes you could upgrade to the larger wheel size. So you could use a 5.30-12 tire and wheel like the part #AM30780. The pilot diameter would be large enough to fit over the hub pilot. Since…

When determining the hanger spacing for a slipper spring you want to go with the dimensions that the hanger kit calls for. For example if you were using the slipper spring hanger kit part #APS3SE with the #SP-177275 you would want a distance of…

I have a replacement option for you, but the only slipper spring we offer that is 1-3/4" wide and is 26-1/4" long is the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles - 26-1/4" Long #e33SR. Since you mentioned that…

The Yates Endcap for Boat Trailer Rollers part #YR130-4 will work great with the Yates Bow Roller for Boat Trailers part #YR300BLK. If you need a roller shaft as well, I recommend the Roller Shaft with Pal Nuts part #CE10701A.

The correct replacement leaf springs for a Malone MicroSport Trailer part #MPG460G is the 2-Leaf Slipper Spring part #e36SR. These will be a direct fit replacement for the old springs. They are slipper springs with a 500 lb weight capacity that…

The main difference between a 5.70-8 trailer tire and a 215/60-8 will be the width. Your current tire is about 5.9 inches wide and the 215/60-8 is about 8.9 inches wide. They will both be about the same height. If your current wheel setup has more…

Slipper Springs like #e33SR do not use a bolt and bushing for the open eye end of the spring. It connects directly to the hanger using a slipper spring hanger kit.

When welding a metal part to another piece of metal, it is always best to have as much metal touching between the two parts. With this in mind, the majority of customers will weld the top of the hanger to the frame of the trailer, leaving the side…

If the trailer currently uses double-eye spring suspension then you will want to use slipper spring hangers if you want to switch spring types. Double-eye hangers would not work in the manner you have described because the shackle bolts are not large…

The difference is found in the application. The Slipper Spring styles, like part #SP-179275, are intended for use with more heavy duty applications, while the Double Eye styles, like part #e77SR are used to provide a more comfortable ride. The part…

Yes, all of the Firestone Ride Rite air suspension systems use 1/4 inch tubing and 1/4 inch NPT fittings like the #F2012 that you referenced. This kit includes 18' of red 1/4" air line, (2) 1/4" NPT (National Pipe Thread) elbow…