Pro Series Trailer Jack PS1400750340 Review Video

Depending on the capacity you need I do have some A-Frame jack options you might like. Take a look at the Ultimate Trailer Jack #322-RDJ-2K. It is more adjustable than other jacks and measures just 1-3/4" from the mounting bracket to the…

For a tire to replace the 145/R12 size tires currently on your trailer, I recommend the Kenda Karrier S-Trail Radial Trailer Tire #AM10130. This is a great radial trailer tire that has a 1,220 pound maximum load at 65 psi. Note that this is a Load…

I do have an option for you to replace the bottom plate of your trailer jack with a wheel assembly. The option I have is the Pro Series 6", Detachable Caster w/ Pin for 2" Diameter Jacks - 1,200 lbs #PS1400750340. This corrosion-resistant,…

All A-Frame mounted jacks like etrailer #TJA-2000S-B will use the same 3-inch mounting hole bolt pattern. This means, the mounting holes are a universal size and pattern so that any A-Frame jack will fit into any A-Frame jack mount as long as your…

If you were on level, smooth ground and you had this Pro Series Detachable Caster #PS1400750340 installed on your jack you should be able to move your trailer around. This of course depends on your physical strength as well, but you should not have a…

You should have the hitch ball height set so that the trailer tows as level as possible behind your pickup. If there is a setting that goes between slightly higher than level and slightly lower than level, opt for the slightly lower setting, when the…

The Brophy #BM20 ball mount will not reduce your vehicle's towing capacity like an adapter or extender will. The ball mount's max towing capacity is 10,000 pounds and its max tongue weight is 1,000 pounds. You should check the capacity of…

The Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range B #AM30590 have a max speed of 65 mph. When trailer tires are not speed rated with a letter, the default is 65 mph max. I've attached an article to…

We have winches with similar capacities to the Badlands 2500 you have that are designed to be used with 110 AC power like the Dutton Lainson StrongArm part #DL24872 but I can't recommend attempting to connect a DC winch to an AC power source…

Yes, the Replacement Caster Wheel #UF49-954035 that you referenced is compatible with trailer jack inner tubes that measure 1-3/4" in diameter. This is verified in the attached review video.

The vast majority of trailer jack wheels don't use traditional steel ball bearings as they aren't really meant for rotation speed but rather weight bearings. I am not aware of any options which use traditional steel ball bearings. The…

I have looked through the various jack casters we offer, and a 6 inch diameter wheel is the smallest one that is offered. It sounds to me as if you need a jack that has a shorter distance between the bottom of the mount and the bottom of the outer…